ACTi E97 Bedienungsanleitung

ACTi Überwachungskamera E97

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ACTi E97 (34 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/34
Indoor Mini Dome &
Indoor Mini Fisheye Dome
Hardware Manual
D91, D92, E91, E92 E93, E94, E95, E96, ,
E97
Ver. 2014/ /09 01
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 4
Safety Instructions 6...........................................................................
Introduction 7
List of Models .................................................................................... 7
Package Contents ............................................................................. 8
Physical Description 9........................................................................
Installation Procedures 11
Installing the Camera on a Surface ............................................... 12
Installing the Camera on a Gang Box ........................................... 15
Step 1: Install the Gang Box ........................................................ 16
Step 2: Install the Gang Box Converter ........................................ 17
Step 3: Connect the Cable ........................................................... 18
Step 4: Install the Camera ............................................................ 18
Step 5: Connect to Network ......................................................... 19
Step 6: Access the Camera Live View ......................................... 19
Step 7: Adjust the Viewing Angle and Focus ................................ 19
Step 8: Close the Dome Cover .................................................... 19
Basic Connections ......................................................................... 20
Other Adjustments and Accessories 21
How to Adjust the Viewing Angle and Focus ............................... 21
How to Replace the Dome Cover ................................................... 23
How to Replace the Lens (for D91, D92, E91, E92 only) .............. 25
Accessing the Camera 28
Configure the IP Addresses ........................................................... 28
Using DHCP Server to Assign IP Addresses ................................ 28
www.acti.com
Hardware Manual
3
Using the Default Camera IP Address .......................................... 30
Access the Camera ......................................................................... 32
www.acti.com
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to
qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an
improper adjustment of other controls may result in damage, and will often require
extensive work by a qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine the video product is in proper operating condition.if
www.acti.com
Hardware Manual
7
Introduction
List of Models
This hardware manual contains the following models:
D91
1MP Indoor Mini Dome with Fixed lens
D92
3MP Indoor Mini Dome with Fixed lens
E91
1MP Indoor Mini Dome with Basic WDR, Fixed lens
E92
3MP Indoor Mini Dome with Basic WDR, Fixed lens
E93
5MP Indoor Mini Dome with Basic WDR, Fixed lens
E94
1 MP Indoor Mini Dome with Basic WDR, SLLS, Fixed lens .3
E95
2MP Indoor Mini Dome with Basic WDR, SLLS, Fixed lens
E96
5MP Indoor Mini Fisheye Dome with Basic WDR, Fixed lens
E97
10MP Indoor Mini Dome with Basic WDR, Fixed lens
www.acti.com
Hardware Manual
8
Package Contents
Camera
Screw Kit
Drill Template
Hexagon Screwdriver
Quick Installation Guide
Drill Template
or
www.acti.com
Hardware Manual
9
Physical Description
Mini Dome
Mini Fisheye Dome
www.acti.com
Hardware Manual
10
1) Ethernet Port
The Ethernet port connects to a network using an Ethernet cable.
2) Reset Button
The is used to restore the factory default settings of the camera, including Reset Button
the administrator’s password.
How to reset the camera?
While the power is on, press and hold the for 5 seconds or until the Reset Button Blue
LED lights up .
3) LED Indicators
Blue LED: The Power LED lights blue when the camera is power ed on, the light goes
off once the initial boot up process is complete.
Amber LED Ethernet Activity LED: The blinks amber when network activity is in
progress.
Green LED Ethernet Link LED : The lights green when a network connection is
established.
4) Memory Card Slot
Insert a memory card (not included) into this slot for local recording.
NOTE: Supports microSDHC and microSDXC cards.
How to install the memory card?
Insert the memory card into the slot with the metal contacts facing down, and then push the
card until it clicks into place.
How to remove the memory card?
Access the Web Configurator to “safely unmount” the card (see the camera Firmware
Manual for details). Once unmounted from the firmware, push the card to eject it from the
slot.
www.acti.com
Hardware Manual
11
Installation Procedures
Before mounting the camera, remove the dome cover by loosening the three (3) screws.
There are two ways to mount the camera:
Surface mount: Use this method to mount the camera directly on the ceiling. See
Installing the Camera on a Surface on page . 12
Gang Box Mount: If the camera will be mounted on a gang box (applicable in some
areas in the US), a gang box converter (not included in the camera package) is needed.
See on page Installing the Camera on a Gang Box 15.
www.acti.com
Hardware Manual
12
Installing the Camera on a Surface
1. Mark the location of the screw holes base on the drill template included in the package.
NOTE: Depending on the surface where you will install the camera, it may be necessary to
drill three (3) holes with 3. on the ceiling and use the supplied screw tox. φ 5
2. Route the bles through the ceiling, taking the Conduit Hole on the drilling template as a ca
reference. Or, slide off the cable exit tab on the dome cover route the cable through that to
hole later.
Conduit Hole
www.acti.com
Hardware Manual
14
5. Connect the Ethernet cable to the Ethernet port of the camera.
6. Adjust the camera viewing angle and focus. See How to Adjust the Viewing Angle and
Focus on page . 21
NOTE: Not applicable to E96 model.
7. Attach the cover to the camera body and tighten the three (3) screws to secure it .
www.acti.com
Hardware Manual
16
Step 1: Install the Gang Box
Before installation, note that the gang box must be installed with either of the following
orientation:
Screw Holes from Left to Right
Screw Holes from Right to Left
4” Round
4” Octagon
1. Remove a knockout on the gang box to route the network cable.
2. Route the network cable along the surface or inside the surface and into the gang box.
3. Attach the gang box on the surface or inside the surface according to the recommended
orientation above.
www.acti.com
Hardware Manual
19
Step 5: Connect to Network
On the network side, connect the other end of the network cable to a network switch. See Basic
Connections on page for more information. 20
Step 6: Access the Camera Live View
See on page for more information on how to access the Live View Accessing the Camera 28
of the camera.
Step 7: Adjust the Viewing Angle and Focus
Based on the Live View, adjust the viewing angle, focus, and orientation of the camera.
Adjustments vary depending on model, see How to Adjust the Viewing Angle and Focus on
page for more information. 21
Step 8: Close the Dome Cover
1. Align cable tab side of the dome cover to the direction of the network cable.
2. Tighten the three (3) screws using the supplied hex screwdriver to attach the dome cover.
Final installation should look similar to the illustration below.
www.acti.com
Hardware Manual
20
Basic Connections
Follow the procedures below to connect the camera to the network .
Please use a PoE (Power over Ethernet) supported switch or injector:
1) Connect your IP Camera to the PoE Switch / Injector using an Ethernet cable.
2) Connect your PoE Switch / Injector to PC / network using another Ethernet cable. a
www.acti.com
Hardware Manual
21
Other Adjustments and Accessories
How to Adjust the Viewing Angle and Focus
NOTE: The following procedures are not applicable E96 (Mini Fisheye Dome) cameras. to
1. Loosen the three (3) screws to remove the dome cover.
2. Based on the live view from the camera, adjust the viewing angle with pan and tilt direction
(for Mini Dome models only).
www.acti.com
Hardware Manual
22
3. Adjust the focus.
NOTE: Not applicable for E93 / E97 model because the camera is already pre-focused.
a. Attach the focus tuner (included in the camera package) on the lens and adjust the
focus of the lens.
b. Remove the lens focus tuner.
4. Attach the dome cover to the camera and tighten the three (3) screws.
www.acti.com
Hardware Manual
23
How to Replace the Dome Cover
For more discrete surveillance needs, the pre-installed dome cover can be replaced with a
smoked -vandal proof dome cover. The smoked dome cover is an optional accessory; , non
contact your sales agent to purchase.
Optional Accessories
PDCX-1106
To replace the dome cover, follow the procedures below:
1. Loosen the three (3) screws to remove the dome cover.
2. Push the clips outwards to release the dome cover latches.
www.acti.com
Hardware Manual
24
3. Remove the ring from the cover.
4. Insert ring to the new dome cover and latch it to the cover body.
www.acti.com
Hardware Manual
25
How to Replace the Lens (for D91, D92, E91, E92 only)
For wider viewing angle, the bundled lens can be replaced with the optional IR-compatible lens.
Contact your sales agent to purchase.
Optional Lens
PLEN-4103
PLEN-4104
To replace the lens, follow the procedures below:
1. Using the bundled hex screwdriver, loosen the three (3) screws to open the dome cover.
2. Attach the lens focus tuner to the lens and continuously rotate until the lens comes off.
www.acti.com
Hardware Manual
26
3. When the lens comes off, remove the spring and remove the bundled lens from the lens
focus tuner.
4. Remove the transparent plastic from the replacement lens.
5. Attach the spring to the replacement lens.
6. Continuously rotate the replacement lens to attach it to the camera.

Produktspezifikationen

Marke: ACTi
Kategorie: Überwachungskamera
Modell: E97

Brauchst du Hilfe?

Wenn Sie Hilfe mit ACTi E97 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera ACTi

ACTi

ACTi Z954 Bedienungsanleitung

29 August 2024
ACTi

ACTi Z411 Bedienungsanleitung

28 August 2024
ACTi

ACTi Z715 Bedienungsanleitung

24 August 2024
ACTi

ACTi Z75 Bedienungsanleitung

24 August 2024
ACTi

ACTi Z315 Bedienungsanleitung

24 August 2024
ACTi

ACTi Z73 Bedienungsanleitung

24 August 2024
ACTi

ACTi E58 Bedienungsanleitung

21 August 2024
ACTi

ACTi A313 Bedienungsanleitung

21 August 2024
ACTi

ACTi B97A Bedienungsanleitung

19 August 2024
ACTi

ACTi B913 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024