Acoustic Energy Aegis Evo Bedienungsanleitung

Acoustic Energy Lautsprecher Aegis Evo

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Acoustic Energy Aegis Evo (5 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
Owner’s manual
Congratulations on choosing the Acoustic Energy AEGIS EVOLUTION
Series — a range of powerful loudspeakers which feature metal
diaphragm technology and are capable of outstanding
performance. Please take a few moments to read this manual. The
advice it contains will enable you to get the very best performance
out of your Acoustic Energy loudspeakers.
The AEGIS EVOLUTION speakers utilise metal cone bass and mid-bass drive
unit technology, proven in the AE Reference series. The ultra rigid ceramic
layered alloy cones ensure pure piston action and also acts as a heat sink for
the bonded voice coil. These features provide exceptional clarity, transparency,
dynamics and power handling. The tweeters, or treble drivers, employ a high-
quality silk dome unit, built on a metal chassis, integrating smoothly with the
rest of the system. All drive units are fully magnetically shielded so that the
speakers can be used in close proximity to a TV screen or monitor for AV
applications. The AEGIS EVOLUTION loudspeakers use quality OFC internal
wiring, which enhances detail and transparency, and may be bi –wired as
desired.
Experiment with the best placement in the room to achieve a full, yet clean
bass response, a natural sounding mid range and a balanced spacious stereo
image. Trust your judgement and ears. For best stereo imaging the speakers
should be about as far apart as they are from the listening position. The
speakers should be equally distant from the listener[s] and should not be too
close to large items of furniture which may cause sound reflections. Ideally they
should be about 1m from the side walls and about 0.7m from the wall behind.
The spacing of the listening seat to the back wall may be quite critical for a
smooth deep bass.
Aegis Evo One
The AEGIS EVO ONE is best heard with the tweeters at, or just above, ear
height when the listener is seated. For serious listening the grilles are best
removed when the greatest clarity results.
Rigid support is essential for the speaker to develop its full detail and dynamic
performance. Good quality metal stands fitted with spikes, cones or other
methods of firm mounting are recommended. Stand mounting, placed as
recommended gives best stereo separation and depth.
If AEGIS EVO ONEs are shelf mounted, the support must be firm; cones, or felt
pads are recommended beneath the cabinets to reduce vibration coupling to
the support. Good quality wall brackets may be used, designed for speakers of
this size and weight. If wall mounted keep 1.5m from the side walls and angle
the speaker towards the listener area if possible; note that a corner position is
the poorest sounding for any speaker even if it is the loudest. AE can supply
damping plugs for the rear port to moderate the bass on request.
Positioning
Introduction
Aegis Evo Three
Please unpack your AEGIS EVO THREE carefully on a carpet or similar surface.
Locate the plinths and fittings and, having carefully inverted the speaker, screw
the plinth to the base of the cabinet using the screws and pilot holes provided.
Please ensure that you have firmly screwed the plinth to the cabinet, failure to
do this will degrade performance.
There is a mass-loading compartment at the bottom of the cabinet.
You may choose to fill it with washed, fully dried non salt contaminated sand,
or suitable metal chips, via the hole at the back. A plastic bung is provided to
seal the cabinet. Mass loading will significantly improve the performance of
the speaker. If you decide not to mass-load the speakers, we still recommend
fitting the plastic bung to avoid unwanted resonance. Be aware that the
plastic bung has not been designed to be removable after insertion. You may
wish to use a temporary removable plug until you have made your decision
High tensile 8mm floor spikes and lock nuts are provided for use with the
plinth. This guarantees optimum coupling to the floor particularly in rooms
fitted with carpet. The spikes penetrate the carpet and couple the speaker
firmly to the floor structure below. The spikes (with lock nut screwed down to
the knurled part of the spike) should be fitted to the threaded insert in the
underside of the plinth while the speaker is still inverted. The speaker is now
ready for installation.. Any final adjustment of spikes to eliminate cabinet
wobble can now be made using a spirit level if required. The lock nuts should
be firmly tightened when the final adjustments to cabinet position and
alignment have been made and there is no rocking.
Closeness to room boundaries has a major impact on the low frequency
performance. The speakers should be kept away from corners (which will
produce bass booming) and they should be 0.6 m from the back walls, and a
greater distance e.g. 1m from the side walls.
Positioning
Aegis Evo Centre
Position the AEGIS EVO CENTRE either immediately above or below the
television screen, whichever places the speaker nearest ear level when listening.
Line the front of the speaker approximately in line with the plane of the screen.
Fix the four self-adhesive foam-rubber feet to the base of the speaker to protect
both the surface on which the speaker stands and the underside of the speaker.
The feet also absorb vibration, which is especially important if placing the
speaker directly onto a thin television cabinet. If placement is on top of the
television, be aware that the flat surface depth may be limited, so ensure the
feet are placed accordingly.
When fine-tuning the Aegis EVO system, adjust the levels of the left, centre and
right channel speakers to give an even movement as sound images pan across
the screen. Most Home Theatre systems also include calibration sounds to help
set the right balance for the three front channels. The EVO Centre may also be
used as high powered surround channel speakers, mounted vertically, since
their particular ‘vocal precision’ tuning also suits them for boundary placement
on a wall.
Check that your amplifier is switched off before installing your loudspeakers. Failure
to do so may result in speaker or amplifier damage if the amplifier is energised and
delivering any power. The diagrams illustrate the connection for one loudspeaker
only.

Produktspezifikationen

Marke: Acoustic Energy
Kategorie: Lautsprecher
Modell: Aegis Evo

Brauchst du Hilfe?

Wenn Sie Hilfe mit Acoustic Energy Aegis Evo benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Acoustic Energy

Acoustic Energy

Acoustic Energy AE100² Bedienungsanleitung

31 August 2024
Acoustic Energy

Acoustic Energy AE105 Bedienungsanleitung

31 August 2024
Acoustic Energy

Acoustic Energy AE1 Active Bedienungsanleitung

31 August 2024
Acoustic Energy

Acoustic Energy AE107² Bedienungsanleitung

31 August 2024
Acoustic Energy

Acoustic Energy 103 Bedienungsanleitung

17 Juni 2024
Acoustic Energy

Acoustic Energy Aegis Evo Bedienungsanleitung

16 April 2024
Acoustic Energy

Acoustic Energy Aegis Evo Subwoofer Bedienungsanleitung

13 März 2024
Acoustic Energy

Acoustic Energy Linear Centre 7 Bedienungsanleitung

10 März 2024
Acoustic Energy

Acoustic Energy Aego T System Bedienungsanleitung

19 April 2023
Acoustic Energy

Acoustic Energy Aego M System Bedienungsanleitung

19 April 2023

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024