Accell UltraAV K072C-014B Bedienungsanleitung

Accell Audio-/Video-Extender UltraAV K072C-014B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Accell UltraAV K072C-014B (2 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

READ ME FIRST – SETUP INSTRUCTIONS

Thank you for purchasing the Accell UltraAV HDMI Distribution

Ampliﬁ er. This product is designed to provide an exceptional

performance and value. Please review the manual before

operating and retain for future reference.

- CAUTION -

1. Ensure the matrix and receivers

have sufﬁ cient ventilation. Do not

cover ventilation openings. Do not

install in a conﬁ ned space.

2. Do not operate near source

of heat. Do not stack on to p,

underneath or between other heat

generating unit/s including other

ampliﬁ ers.

3. Unplug power adapter if not

used for an extended period.

4. To prevent damage from power

surges, the unit should be plugged

into a surge protector or surge pro-

tected power source.

5. Do not use near liquid or areas

of heavy moisture.

6. Clean unit with a clean and dry

cloth only.

7. This unit cannot be serviced in

the ﬁ eld. Contact Accell if service is

required.

8. Do not open case, risk of shock -

shock hazard.

9. Do not modify power cord or use

the product if the power cord is

damaged.

Introduction

The UltraAV HDMI 4x4 Matrix and Distribution Amplifier featuring

HDBaseT accepts signals from up to 4 HDMI enabled audio/video sources

and distributes the signal to up to 4 HDMI enabled displays. The matrix

can be configured to send any input to a HDMI displays, monitors, ny

projectors or TV’s.

Over-Current and Over-Voltage Protection

The circuit boards are equipped with both oltage over-current and over-v

protection and will automatically power down if encountered. The circuit

boards will restore automatically once the excessive current or voltage

has passed.

Package Contents

●HDMI Distribution Amplifier (Matrix) ●1 Power Adapter (for Matrix)

●4 HDBaseT Receivers ●4 Power Adapters (for Receivers)

●CD-ROM (for RS-232 control) ●4-Pair IR-TX and IR-RX

●Remote Control (with battery) ●Owner’s Manual

●2 Front Panel Mounting Ears (with 4 Screws)

Model Number:

K072C-014B

UltraAV

HDMI 4x4 Matrix

with HDBaseT

Setup

Note: All Cat5e/6 cables must be terminated to 568B standards.

Unsheilded (or properly terminated sheilded cable), solid core Cat5e,

Cat6, Cat6e, Cat7 or Cat7e cable can be used. Stranded core is not

suggested as it can reduce signal transfer. Recommended to use a

continuous length of cable terminated at the matrix and receiver ends.

With the matrix power switch in the OFF position, connect an HDMI High

Speed cable from the HDMI Output of the most commonly used audio/

video source to the HDMI Input 1 located on the rear of the matrix.

Similarly, connect the remaining source devices to the HDMI Input rts Po

on the matrix.

Tips: Use the shortest length HDMI cables possible in each point

in the installation. Use only High Quality and High Speed HDMI

cables.

If desired, run a LAN cable from your network or router into the port

labeled LAN IN on the rear of the matrix.

Next, connect a Cat5e/6 cable to the HDBaseT Out 1 port on the rear of

the matrix. Connect the other end of the Cat5e/6 cable to the HDBaseT

IN port on the rear of the HDBaseT receiver positioned near the TV. Run

a short, High Speed HDMI cable from the HDMI Out port on the receiver

to the HDMI In port on the TV. If desired, two Ethernet ports are

provided on the rear of the receiver for connection to Internet enabled

TV and/or computer. Plug a provided power adapter into an AC outlet

and the other end into the HDBaseT receiver. Using the same steps,

connect the remaining audio/video sources to the matrix.

The matrix has internal memory that stores the system

information for faster switching. Please follow the steps in the

order listed: Turn ON the displays and ensure they are awake (not in

standby mode). Check the displays INPUT setting to ensure the correct

HDMI port is active.

Turn on the source devices and ensure they are awake (not in standby

mode). Connect the power adapter to the matrix. Plug the power

adapter into a surge protected AC power outlet. Turn the matrix power

switch to the ON position.

The matrix has a low power d w and is intended to be left on. If ra

the matrix is turned off, start up the system as noted above. If new

hardware is added, please perform a RESET.

To RESET the matrix, turn off the display and source devices. Power off

the matrix and unplug the power adapter from the rear of the matrix.

Wait 20 minutes for the memory of the system configuration inside of

the matrix to be deleted. llow the setup instructions above to correctly Fo

initiate the setup.

HDMI 4x4 Matrix and Distribution Amplifier

Model: K072C-014B

Speciﬁ cations

● Independently access 4 HDMI Sources from 4 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Audio formats supported: S-HD 7.1, Dolby TDT rue-HD 7.1

● Deep color up to 36-bit

● RS232 Port for control

● Maximum HDMI input/output cable length: Up to 16ft./5m

● Maximum Cat5e/6 output cable length: Up to 328ft./100m

● Supports up to 100 BaseT Ethernet, two ports per receiver

● 19” Rack Mounting (front panel mounting brackets included)

● 12V DC, UL Listed Power Supply for 4 x 4 Matrix Unit

● 5V DC, UL Listed Power Supplies for Receiver Units (4 Total)

● Matrix dimensions: 17.3”W x 2”H x 7.9”D (440W x 51H x 20D mm)

● Receiver dimensions: 4.4” W x .9” H x 3” D (112W x 23H x 76D mm)

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

Infrared Control (IR)

Ultra-IR ceiver andRe

Transmitter Pin

Assignment

Ultra-IR ceiver (5 ft.)Re

Dual Frequency: 38KHZ-60KHZ

PN: B164B-002B

Ultra-IR ansmitter (5 ft.)Tr

Dual Frequency: 38KHZ-60KHZ

PN: B164B-003B

Q. Get the message “This protocol is not supported” or other error message.

A. See answer A1 abo .ve and repeat the steps outlined

Q. The matrix is not down sampling the video and some of the TV’s are not

displaying a picture.

A1. Go into the TV’s setup and configure the resolution to match all the

connected TV’s. The TV’s should share the same resolution.

A2. In the source devices menu options set the source device to output a

resolution that matches all the connected displays.

Q. My TV resolution are not optimized.’s

A. The matrix will query the displays and provide the highest common video

resolution amongst them. Example: Using a 1080p source, if 3 of the displays

support a maximum resolution of 1080p and 1 displ supports a maximim ay

resolution of 720p ate at a resolution of 720p. If the 720p , all 4 display will oper

TV in the example is then turned off, the other 3 displays can then operate in

1080p resolution. Turn Off then turn On the matrix to refresh the configuration.

The three 1080p TV’s will refresh (flicker) then each will displ a 1080p picture.ay

A SSISTANCE: Questions regarding this product or its product

warranty, please check out our b site at: www.accellcables.com. We

Customer service can be reached by email at support@accellcables.com

or phone at 510-438-9288, toll free 877-353-0772 (M-F 9am-5pm PST).

1-YEAR MANUFACTURERS WARRANTY

The Accell UltraAV Matrix is warranted for one year from date of

purchase to be free of defects in material and workmanship. In the event

of such defects, the Accell product will be repaired without charge or

replaced with a new one at our option, if delivered to Accell Corporation

prepaid, together with a copy of the sales receipt indicating the proof of

purchase date and place of purchase. This warranty excludes defects due

to normal wear, abuse, shipping damage, or failure to use the product

in accordance with the instructions. ACCELL CORPORATION SHALL NOT

BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF

USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR

COMMERCIAL LOSS, OR ANY OTHER DAMAGES, WHETHER INCIDENTAL,

CONSEQUENTIAL OR OTHERWISE. YOU AGREE THAT ACCELL’S MAXIMUM

LIABILITY ARISING FROM ANY PRODUCT SOLD BY ACCELL SHALL NOT

EXCEED THE PRICE OF SUCH PRODUCT. SOME JURISDICTIONS DO NOT

ALLOW THE LIMITATION OF EXCLUSION OF LIABILITY FOR CERTAIN

DAMAGES, SO THE ABOVE MAY NOT APPLY TO YOU TO THE EXTENT

SUCH JURISDICTION’S LAW IS APPLICABLE TO THIS AGREEMENT. This

warranty gives you specific legal rights, and you may have other rights

that vary from state to state.

LIMITATION OF LIABILITY

IN NO EVENT SHALL ACCELL CORPORATION, ITS SUBSIDIARIES

OR AFFILIATES, OR THEIR RESPECTIVE PARTNERS, OFFICERS,

DIRECTORS, EMPLOYEES, SHAREHOLDERS, REPRESENTATIVES OR

AGENTS (COLLECTIVELY, “ACCELL”) BE LIABLE FOR DIRECT, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR INDIRECT DAMAGES

(INCLUDING BUT NOT LIMITED TO, LOSS OF DATA, USE OR PROFITS),

HOWEVER CAUSED, WHETHER FOR BREACH OF CONTRACT, NEGLIGENCE,

OR OTHERWISE, AND WHETHER OR NOT ACCELL HAS BEEN ADVISED

OF THE POSSIBILITY OF ANY SUCH DAMAGES. YOU AGREE THAT

ACCELL’S MAXIMUM LIABILITY ARISING FROM ANY PRODUCT SOLD

BY ACCELL SHALL NOT EXCEED THE PRICE OF SUCH PRODUCT. SOME

JURISDICTIONS DO NOT ALLOW THE LIMITATION OF EXCLUSION OF

LIABILITY FOR CERTAIN DAMAGES, SO THE ABOVE MAY NOT APPLY TO

YOU TO THE EXTENT SUCH JURISDICTION’S LAW IS APPLICABLE TO

THIS AGREEMENT.

WARRANTY RETURNS PROCEDURE

Contact Customer Support to obtain a Return Authorization (RMA)

number. RMA numbers are valid for 30 days from the date of issuance.

We are unable to accept returns without an RMA number. Returns

without an RMA number clearly printed on the outside of the package

will be refused and returned unopened. All returns must be shipped

prepaid at the expense of the shipper.

Accell assumes no responsibility for any inaccuracies and liability for

direct, indirect, special, incidental, or consequential damages as a result.

Due to ongoing improvements, Accell reserves the right to make changes

to hardware, packaging and any accompanying documentation without

prior written notice.

registered trademarks of Accell Corporation.

Support

RS-232 Control Port (4x4 HDMI Matrix)

The RS-232 port located on the 4x4 HDMI Matix provides control similiar

to the remote control from a remote device. A correctly configured

RS232 cable is required. Connect the RS232 cable end to your PC Serial

port (default =COM 1). The other end to HDMI Matrix RS232 port.

Place the included CD-ROM into your computer CD-ROM drive. Go to

the CD-ROM dri and double-click the “HDMI FamilySetupB.exe” file ve

to install the command configuration application. The HEX codes and

settings, RS-232 cable configuration as well as additional details on the

usage of the application are included in PDF file format on the CD. Open

the CD and locate the PDF file. open/read use Adobe Acrobat Reader.To

The 4x4 HDBaseT Matrix includes 4 pairs of Infrared Extenders, 4 IR

Transmitters (IR-TX) and 4 IR ceivers (IRe R-RX). The front panel of the

matrix has 4 IR-TX ports and 4 IR-RX ports. The HDBaseT ceivers each Re

have one IR-TX port and one IR-RX port. Using the included extenders

and appropriate IR port, you can choose to configure the IR to control

the source devices when positioned at the displ or control the displ ay ay

devices when postioned at the source.

To control multiple source devices with one IR-TX, stack the sources

together and position the IR-TX so that all the source devices can receive

the IR signal (Blast) from the IR-TX.

The port on the matrix labeled “IR Extender” accepts an optional IR

Receiver, taking commands from the included matrix remote control. This

receiver enables line-of-sight if the matrix with its built-in IR receiver,

labeled on the front panel as , is not visable.IR

LED indicator lights

On initial power on, all LED lights on the matrix should come on solid

blue. All the numerical LED displays will momentarily read ‘0’ and

then change to ‘1 If less than the maximum number of Displays ’.

are connected to the matrix (not all the outputs are used) the

numerical indicator will indicate ‘0’ for that output and there will be no

corresponding blue LED for the unused output. Blue lights HDMI OUT

will only appear for devices connected. Any unused HDMI Input ports will

also have its HDMI IN blue LED unlit.

The HDBaseT Receiver has 4 LED indicators:

1. HDCP: A solid LED indicates that the HDCP handshake between the

source and displ has been authenticated.ay

2. Link: Indicates a connection between the Matrix and the Receiver.

3. Mode: A flashing LED indicates correct operation of the system.

4. Power: A solid LED indicates power to the receiver.

Operation

Manual Control: u can operate HDMI source switching manually by Yo

using the buttons labeled ‘Out” located on the front panel. Press the

button that corresponds to the output that you want to change the HDMI

source on and toggle through until the desired HDMI input source video

is being displayed. A numerical LED indicates which HDMI source input is

being shown on each output (HDTV).

Remote Control: Included with the Matrix is a Remote Control. It can

control the matrix by pointing it at the front of the matrix, targeting

the integrated IR receiver labeled . IR uses line-of-sight between IR

the remote control (or IR-TX) and the receiver. The angle which the

remote will work is at about a 15° degree angle in either direction to the

receiver. If the receiver is postioned such that there is not line-of-sight,

the port labeled “IR Extender” accepts an optional IR R This eceiver.

receiver enables line-of-sight if the matrix is out of position.

LED Indicator Lights Troubleshooting

A. One of the displ does not show a picture or output audiay o.

Q. Check the displays input setting to ensure it is set to receive a signal from the

connected HDMI port.

Q. One or more of the connected displays will not display a picture while one or

more of the displa ys do display a picture:

A1. Turn off the power to the matrix, source and displays. it 1 minute. Turn Wa

the source on. Turn the displays on. Turn the matrix on.

Produktspezifikationen

Marke:	Accell
Kategorie:	Audio-/Video-Extender
Modell:	UltraAV K072C-014B
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz
AC Eingangsspannung:	12 V
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-15 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 90 %
Typ:	AV-Sender & -Empfänger
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Audio-System:	Multikanal
Unterstützte Video-Modi:	1080p
Ein-/Ausschalter:	Ja
Externes Netzteil:	Ja
Serielle Schnittstelle:	RS-232
Maximale Auflösung:	1920 x 1080 Pixel
Maximal mögliche Übertragungsstrecke:	100 m
Anzahl serielle Anschlüsse:	1
unterstütze Kabeltypen:	Cat5e, Cat6
Bandbreite:	6.75 Gbit/s
Empfängerdimensionen (B x T x H):	112 x 76 x 23 mm
HDMI-In:	4
RJ-45-Eingangsanschlüsse:	2
Transmitter-Abmessungen (BxTxH):	440 x 20 x 51 mm
RJ-45-Ausgangsanschlüsse:	4
Ethernet/LAN:	Ja