4ms Stereo Triggered Sampler Bedienungsanleitung

4ms Klaviatur Stereo Triggered Sampler

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr 4ms Stereo Triggered Sampler (32 Seiten) in der Kategorie Klaviatur. Dieser Bedienungsanleitung war fĂĽr 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
Stereo Triggered Sampler
4ms Company
User Manual 1.1 – March 7, 2022
for f irmware v1.5
The Stereo Triggered Sampler is a high fidelity, two-channel stereo audio recorder and playback module. The
STS can record high quality stereo WAV files while simultaneously playing two different stereo files. A maximum of
600 samples can be loaded at one time from the removable/swappable microSD card, in a variety of formats up to
96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are
CV controllable, and trigger jacks for play, record, and reverse allow for synchronization. On-board editing tools
allow you to set loop/trim points and gain, as well as assigning samples to banks and slots.
•Two independent stereo playback channels can play any of 600 samples simultaneously"
•Recording channel creates stereo WAV files directly onto microSD Card for immediate use"
•Extremely low noise, high fidelity design"
•Plays a variety of WAV files up to 32-bit/96kHz"
•Intelligent file system makes loading large sample libraries easy by organizing banks into folders"
•CV and controls for 1V/oct tracking, Start Position, Length, Sample selection, Reverse and Play"
•Trim samples and set Loop points, adjust gain, and re-organize banks and sample slots on the fly."
•Includes microSD card with Sample Pack, SD adaptor, 10-to-16 pin power cable and M3 screws"
Table of Contents
Setting up your Stereo Triggered Sampler# ".............................................................3
Overview# "................................................................................................................3
Electrical and Mechanical Specifications# "..............................................................5
Tutorial 1: Basic Playback# "......................................................................................6
Tutorial 2: Navigating Banks# "..................................................................................7
Quick Bank Select# "...........................................................................................8
Stereo/Mono Mode# "................................................................................................9
Channel Playback Volume# ".....................................................................................9
Tutorial 3: Recording Samples# ".............................................................................10
Enabling Recording# "........................................................................................10
Start/Stop Recording# ".....................................................................................10
Where is my recording?# ".................................................................................10
Teleport to the Rec Bank# "...............................................................................10
Tutorial 4: Loading Files onto the microSD Card# ".................................................11
Create a bank by copying a folder of WAV files# ".............................................12
Folders with color names# "...............................................................................13
Automatic loading of new/moved files# "...........................................................13
Sample List HTML file# "..........................................................................................13
Edit Mode: Gain, Loop/Trim points# "......................................................................14
Saving and Reverting# "...........................................................................................15
Copying# "................................................................................................................15
Tutorial 5: Creating Slices# "....................................................................................16
Example Patch: Sequencing the STS# "..................................................................17
Example Patch: Granular Scrubbing# "...................................................................18
Recording the STS Output as a New Sample# ".....................................................20
Example Patch: Clock Sync and Shifting Ping-Pong Loops# "...............................20
Assigning Samples to Banks and Slots# "...............................................................21
System Mode# ".......................................................................................................23
Play/Recording Settings# "................................................................................23
LED Color Adjustment Mode# ".........................................................................24
What version is my STS?# "...............................................................................24
1V/OCT Tracking Compensation# ".........................................................................25
Advanced Features# "..............................................................................................26
Start-up banks# "...............................................................................................26
Adjustable Fade Time (Smoother Looping)# "...................................................26
Auto Increment Sample Slot on Record Mode# "..............................................26
Envelopes on/off# "............................................................................................27
Variable Trigger Delay / Latency# "....................................................................27
Split Monitoring# "..............................................................................................28
Rebuilding the Index File# ".....................................................................................28
Updating Firmware (Audio Bootloader)# "...............................................................29
microSD Card Specifications# "...............................................................................30
File Formats# ".........................................................................................................31
Chart of All Button Features#................................................................................32
Page of 2 32
Setting up your Stereo Triggered Sampler
1. Remove the Stereo Triggered Sampler (STS) from the box and anti-static bag. The RAM chip on
the STS may be damaged by static electricity; take care not to touch the circuit board."
2. Connect the free end of the power cable to a 16-pin Eurorack power header on your power supply
distribution system, with the red stripe towards the -12V. The other end of the power cable is a 10-
pin connector which should already be connected to the STS so the red
stripe on the power cable is orientated towards the bottom of the module
(the bottom is marked by a white stripe and the word “POWER”). Note:
The STS is reverse-polarity protected, but other modules being incorrectly
connected could damage anything on the power bus."
3. Backup your microSD card before you first power the STS on! We
recommend you perform a full backup of the microSD card by using a
computer (use the included SD card adaptor if needed). This will be useful
if the card ever becomes damaged or you wish to restore the STS to the
original factory settings and samples."
4. Securely screw the STS to the rails of your case. Power the system on."
5. Begin with Tutorial 1: Basic Playback on page 6 of this manual."
Never remove the microSD card when the light is on! Busy
Overview
• "Up to 600 samples loaded at one time (10 samples per bank)
•Includes a microSD card with over 200 samples"
• "Extremely quiet, low noise and low jitter design
• "Stereo or Mono operation:
•Stereo mode: Two stereo files are mixed and played through the L and R output jacks (L+L
and R+R)"
•Mono mode: Each file is mixed to mono and output through the channel's output jack (L+R
and L+R)"
• "Firmware can be updated by playing an audio file into the STS
Two independent playback channels:
•Each channel outputs in mono or stereo through the shared L/R jacks"
•Play button/trigger jack: Tapping the button or receiving a trigger starts/re-starts the sample"
•When is set to “All”, the Play button starts/stops the sample (set in System Mode, Length
see p.23)"
•Sample CV/knob: selects a sample from the channel's bank"
•1V/OCT Pitch CV and knob: playback pitch (-10 to +4.3 octave range)"
•Tracking: +/- 0.4cents over four octave range (C0–C3)"
•Start Pos CV/knob: position in the sample to begin playback (loop start point)"
•Length CV/knob: playback time (loop end point)"
•Length knob at max: entire file is played"
•Length knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)"
•Length knob <50%: Percussive decay envelope is applied to the playback (attack-only
envelope if playing Reverse)"
•Length <1%: Tiny grains are played (can be used to sweep through sample file data
manually)"
•Reverse button/jack: toggles forward/backwards"
•Bank button: selects channel's bank "
Page of 3 32


Produktspezifikationen

Marke: 4ms
Kategorie: Klaviatur
Modell: Stereo Triggered Sampler

Brauchst du Hilfe?

Wenn Sie Hilfe mit 4ms Stereo Triggered Sampler benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Klaviatur 4ms

Bedienungsanleitung Klaviatur

Neueste Bedienungsanleitung fĂĽr -Kategorien-