2Heat 2HT-TT Bedienungsanleitung

2Heat Thermostat 2HT-TT

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für 2Heat 2HT-TT (10 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Digital
Digital
Digital
DigitalDigital Thermosta
Thermosta
Thermosta
Thermosta Thermostat / Timer 2H
t / Timer 2H
t / Timer 2H
t / Timer 2Ht / Timer 2HT
T
T
TT-TT
-TT
-TT
-TT -TT
1
Features
Attractive and Big LCD Display with black background and white digits.
Adjustable Thermostat Mode or Timer Mode.
Heat & Cool Mode Selection.
Countdown timer Normally Open or Normally Closed.
Frost protection.
Room and external sensor (sensor included).
16A output voltfree.
The thermostat / timer can be used for heating or cooling appliances, boilers, low voltage 0-250Vac/dc and much
more.
CE, RoHs approval.
Technical Data
Power Supply 230Vac, 50/60Hz Backlight White, black digits
Max Load 16A, voltfree Sensor internal and external NTC 10K
Set Point Range 5~40 Accuracy ±0.5 (step control by +0.5 ) ℃ ℃
Ambient 0~50 Protection Class IP30
Relative Humidity 85% Housing ABS to UL94-5 fire retardant plastic
Display & Buttons
Setting up
Timer Mode Icon
On/Off button &
Parameter setting button
Mode button
Setting down
Room or SET
temp. indicator
Hold Time Remaining
Heat Mode
Cool Mode
Heating ICON
Cooling ICON
Digital
Digital
Digital
DigitalDigital Thermosta
Thermosta
Thermosta
Thermosta Thermostat / Timer 2H
t / Timer 2H
t / Timer 2H
t / Timer 2Ht / Timer 2HT
T
T
TT-TT
-TT
-TT
-TT -TT
2
Thermostat Mode, Maximum Setpoint setting
Long press button, then press or to change the setpoint, range 5~40 .
Countdown Time Setting
When unit work in timer mode, long press , the hour start to flash, press or to set the hour, then press
again, the minute start to flash, press or to set minutes. Then you can press to start or stop countdown time.
When start, the timer icon will flash, when stop, timer icon stop flashing.
Countdown Timer Mode Working principle
Countdown timer function in NO, press to start, countdowntimer runs, output if off, output turns on when time is ended.
Countdown timer function in NC, press to start, countdowntimer runs, output if on, output turns off when time is ended.
Open window detect function
When the Open Window mode is enabled in the parameter setting, the system will automatically stop heating when it detects a
sudden drop of room temperature (2°C in 15 minutes). This is normally caused when a window or door is opened without
turning off the heating device. The device will return to the previous mode of operation after 30mins, then icon “ OP” disappear.
Press any button will exit OWD function during the heating off period.
Parameter Setting
Thermostat mode: Turn units off, press and hold button for 5sec to enter parameter setting. Each press of button
will go to next item setting.
Timer mode: press and hold the button for 5-10sec to enter parameter setting. Display shown
01
in the display.
Digital
Digital
Digital
DigitalDigital Thermosta
Thermosta
Thermosta
Thermosta Thermostat / Timer 2H
t / Timer 2H
t / Timer 2H
t / Timer 2Ht / Timer 2HT
T
T
TT-TT
-TT
-TT
-TT -TT
3
Menu
Description Range Default Value
01 Enable thermostat & disable Countdown
Timer
Enable/Disable Enable=
Disable=
02 Disable thermostat & Enable Countdown
Timer
Enable/Disable Disable=
Enable=
03 Dead zone 0.5~3 0.5
04 Open window detect function ON/ OFF OFF
05 Mode Select Heat /Cool Cool =
Heat =
06 Timer Function NO/NC NC= turned on and
after x time it turns
off (OFF is shown in
display)
NO= turned off and
after x time it turns
on (ON is shown in
display)
07 Temp. calibration for internal sensor -8 ~8 ℃ ℃ 0
08 Sensor Select 0 Room 2 = both sensors
are active,
floorsensor should
be installed.
1 Floor
2 Room & Floor
09 Frost Protection Temp. 5 ~15 ℃ ℃ 5
10 Temp. calibration for external sensor -8 ~8 ℃ ℃ 0
11 Floor Temp. Read Only
12 Over-Heat Protection Temp. Preset 20 ~80 ℃ ℃ 32
17 Factory reset 0: No 0
1: Yes, and then press
On/off button for 5s,wait
until thermostat restart
Software version 3182


Produktspezifikationen

Marke: 2Heat
Kategorie: Thermostat
Modell: 2HT-TT

Brauchst du Hilfe?

Wenn Sie Hilfe mit 2Heat 2HT-TT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Thermostat 2Heat

Bedienungsanleitung Thermostat

Neueste Bedienungsanleitung für -Kategorien-