ZyXEL P-871M Bedienungsanleitung

ZyXEL Router P-871M

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZyXEL P-871M (20 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
Copyright © 2009. All rights reserved
P-871M
VDSL Modem
User’s Guide
Version ME1
11/2009
Edition 2
DEFAULT LOGIN
Password 1234
Console Port Speed 38400 bps
P-871M User’s Guide
2
Overview
The P-871M is a VDSL modem in CPE (Customer Premises
Equipment) mode and can also act as CO (Central Office)
equipment. CO equipment is where home and office phone
lines terminate and connects to a much larger switching
system. In the following example, you can build up a VDSL
bridge connection between two P-871Ms.
This guide covers:
•Overview, page 2
•Hardware Connections, page 3
•CLI Commands Configuration, page 6
•Firmware Upgrade, page 9
•Wall-mounting Instructions, page 12
3
P-871M User’s Guide
1 Hardware Connections
You can set the P-871M to work in either CO mode or CPE
mode. Follow the procedure below to complete the hardware
connections.
1.1 CO Mode
1Set the CO/CPE switch on the rear panel to the CO side.
2Use the included console cable to connect the CONSOLE
port to your computer’s COM port for configuration.
3Use the included yellow Ethernet cable to connect the
ETHERNET port to your network device, such as a switch.
4Over ISDN: Use the included gray cable with a RJ-45
connector to connect the DSL port to another P-871M in
CPE mode.
Over POTS: Use the included gray cable with a RJ-11
connector to connect the DSL port to another P-871M in
CPE mode.
3
1
24
5
6
CO
CPE

Produktspezifikationen

Marke: ZyXEL
Kategorie: Router
Modell: P-871M

Brauchst du Hilfe?

Wenn Sie Hilfe mit ZyXEL P-871M benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Router ZyXEL

Bedienungsanleitung Router

Neueste Bedienungsanleitung für -Kategorien-