ZyXEL P-871H Bedienungsanleitung

ZyXEL Router P-871H

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ZyXEL P-871H (4 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

P-871H

VDSL Modem with 4-port Switch

Quick Start Guide

Version 3.50

7/2005

P-871H Quick Start Guide

Overview

The P-871H is a VDSL modem that provides super high-speed Internet access through a telephone line. The

P-871H supports high bandwidth applications such as video streaming, movies on demand, on-line gaming,

video and Voice over IP (VoIP). The Prestige has a built-in switch that allows you to connect up to four

network devices.

The P-871H is referred to as “the Prestige” in this guide. See your User’s Guide for background information on

all features.

1 Hardware Connections

1 DSL and Phone Connection

Connect the Prestige DSL port to the telephone jack or wall outlet using a telephone wire. Connect the Prestige

PHONE port to a telephone using a telephone wire

2 LAN Connection

Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access.

3 POWER Connection

Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User’s

Guide for power adaptor specifications by region).

4 Turn On the Prestige

P-871H Quick Start Guide

After you’ve made the connections, push in the power button.

The PWR LED turns on when you turn on the power. The SYS

LED blinks while performing system testing. The SYS LED then

turns steady on if the testing is successful. The VDSL LED blinks

and turns steady on if the Prestige has a successful DSL

connection. The LAN LEDs turn on if the (corresponding) LAN ports are properly connected.

2 Internet Connection

After you turn on the Prestige and have a successful DSL connection, test your connection by visiting

www.zyxel.com. If you have problems connecting, see the Troubleshooting section.

3 Troubleshooting

3.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can communicate with your Prestige. Refer to your User’s Guide for detailed

IP address configuration for other Windows and Macintosh computer operating systems.

PROBLEM CORRECTIVE ACTION

The PWR LED is not on when I

turn the Prestige on.

You might have used the wrong power adaptor. Use the included power adaptor

only. Refer to the power specifications. Use a different power outlet. Disconnect

and connect the power adaptor to turn on the Prestige again. Your Prestige or

power adaptor may have malfunctioned.

Contact your local vendor.

The VDSL LED is not on or is

blinking.

Make sure the Prestige is connected to a power source and is turned on. Check

the connection to the telephone wall jack.

Connect the DSL port to a different telephone wall jack.

If the problem continues, contact your DSL service provider.

The LAN LED(s) is off. Check the connection between the Prestige and the LAN devices. Refer to

Section 1 on page 2.

If the problem continues, contact your Internet Service Provider (ISP).

I cannot connect to the Internet. Check the cable connection from your computer to the Prestige.

If the problem continues, contact your Internet Service Provider (ISP).

Produktspezifikationen

Marke:	ZyXEL
Kategorie:	Router
Modell:	P-871H
Gewicht:	350 g
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	4
Plug & Play:	Ja
Eingebaut:	Nein
Netzteiltyp:	200 - 240 V AC
Abmessungen (BxTxH):	180 x 127 x 35 mm
Unterstützung Datenflusssteuerung:	Ja
Konformität mit Industriestandards:	IEEE 802.3/3u/3x
Datenrate:	10/100 Mbit/s
Konnektivität LEDs:	System, VDSL, 10/100Base-TX
Modem (RJ-11) Port:	1
Modemtyp:	VDSL2
Aufwärts gerichtete Datenrate:	100 Mbit/s
Abwärts gerichtete Datenrate:	100 Mbit/s