Yealink CPN10 Bedienungsanleitung

Yealink Telefon CPN10

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yealink CPN10 (8 Seiten) in der Kategorie Telefon. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Quick Start Guide

Expansion PSTN Box CPN10

PSTN box CPN10 is used to connect CP860

conference phones to the PSTN (Public Switched

Telephone Network). It is a cost-effective solution

for PSTN office. Up to 2 cascaded PSTN Boxes can

be installed to an IP conference phone, which allows

you to experience the local three-way conference

conveniently in excellent speech quality with PSTN.

You can also record the calls with a USB flash drive

when using the PSTN box.

Packaging Contents

Quick Start Guide

Double-side

Tape

3m PSTN

Cable

PSTN Box

CPN10

Hardware Component Instructions

The following figure shows the primary hardware

components of CPN10:

USB Plug

USB Port PSTN Port

PSTN Port

Installing the Expansion PSTN Box

Installing a PSTN box , as shown below:

Optional USB flash drive

You can fix the two cascaded PSTN boxes by the

double-side tape.

Installing two PSTN boxes for three-way local

conference, as shown below:

1. Press the soft key to enter the Account setting OK

screen.

2. (Optional.) Press or to select the desired

PSTN account.

3. Press the soft key.Enter

4. Press or soft key to select or Enabled

Disabled Active Line from the field.

5. (Optional.) Enter the string that will appear on the

LCD screen in the field.Label

6. Press the soft key to accept the change.Save

Configuring the PSTN Account

PSTN account is also configurable at the path: Menu

-> -> (default password: Settings Advanced Settings

admin)-> .Accounts

When one PSTN box is connected successfully, the

LCD screen prompts “Connect PSTN1 Go to Setting?”.

When the second PSTN box CPN10 is connected

successfully, the LCD screen prompts “Connect

PSTN2 Go to Setting?”.

Setting the default account:

Configuring the PSTN account:

1. Press -> ->Menu Settings Advanced Settings

(default password: admin)-> .Accounts

2. Press or to select the desired PSTN account.

3. Press the soft key.Default

Produktspezifikationen

Marke:	Yealink
Kategorie:	Telefon
Modell:	CPN10
Breite:	73 mm
Tiefe:	48 mm
Mitgelieferte Kabel:	Telefon (RJ-11)
Produktfarbe:	Schwarz
Höhe:	15 mm
Betriebstemperatur:	0 - 50 °C
Zertifizierung:	CE
Warentarifnummer (HS):	84733020
Plug & Play:	Ja
Temperaturbereich bei Lagerung:	-10 - 50 °C
Kompatible Produkte:	Yealink CP860/CP920
Relative Luftfeuchtigkeit:	10 - 90 %
Anschluss 1:	RJ11
Anschluss 2:	USB
Steckverbinder 1 Geschlecht:	Männlich
Steckverbinder 2 Geschlecht:	Weiblich