Yamaha RX-V1070 Bedienungsanleitung

Yamaha Empfänger RX-V1070

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yamaha RX-V1070 (31 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 68 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/31
IMPORTANT!
Please record the serial number of this
unit in the space below.
Model:
Serial No.:
The serial number is located on the rear
of the unit.
Retain this Owner’s Manual in a safe
place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
R ISK OF E L E C T R I C S H OC K
DO N O T O P E N
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-SERVICEABLE
PARTS INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
•Explanation of Graphical Symbols
CAUTION
Natural Sound Stereo Receiver
Thank you for selecting this YAMAHA stereo receiver.
OWNER’S MANUAL
CONTENTS
Safety Instructions ................... 2
Features ................................... 4
Supplied Accessories .............. 4
Profile of This Unit ................... 5
Speaker Setup for This Unit ..... 6
Connections ............................. 7
Adjustment Before Operation
... 12
Operations ............................. 15
Tuning Operations .................. 17
Using Digital Sound Field
Processor (DSP) .................... 19
Setting the SLEEP Timer ....... 24
Remote Control Transmitter ... 25
Notes about the Remote
Control Transmitter ................. 28
Troubleshooting ...................... 29
Specifications ......................... 30
RX-V1070/870
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2Retain Instructions – The safety and operating instructions
should be retained for future reference.
3Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4Follow Instructions – All operating and other instructions
should be followed.
5Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should
be moved with care. Quick stops,
excessive force, and uneven
surfaces may cause the unit and
cart combination to overturn.
7Wall or Ceiling Mounting – The unit
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
8Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block the
ventilation openings; or placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow
of air through the ventilation openings.
9Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
10 Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the unit;
or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or exhibits a
marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
19 Outdoor Antenna Grounding – If an outside antenna is
connected to this unit, be sure the antenna system is
grounded so as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
2
SAFETY INSTRUCTIONS
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING
MAST
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810–20)
GROUNDING CONDUCTORS
(NEC SECTION 810–21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC – NATIONAL ELECTRICAL CODE
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with
these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
Caution: Read this before operating your unit
3
1To ensure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
2Install your unit in a cool, dry, clean place – away from
windows, heat sources, and too much vibration, dust,
moisture or cold. Avoid sources of hum (transformers,
motors). To prevent fire or electrical shock, do not
expose to rain and water.
3Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4Never open the cabinet. If a foreign object drops into
the set, contact your dealer.
5Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Then gently
disconnect the power plug and the cords connecting to
other equipment. Never pull the cord itself.
6Do not attempt to clean the unit with chemical solvents;
this might damage the finish. Use a clean, dry cloth.
7Always set the volume control to “– ∞” before starting
the audio source play: increase the volume gradually to
an appropriate level after the play is started.
8To prevent lightning damage, pull out the power cord
and remove the antenna cable during an electrical
storm.
9Be sure to read the “Troubleshooting” section on
common operating errors before concluding that your
unit is faulty.
10 Do not connect audio equipment to the AC outlets on
the rear panel if that equipment requires more power
than the outlets are rated to provide.
FCC INFORMATION
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without
affecting your sensitive hearing. Since hearing
damage from loud sounds is often undetectable
until it is too late, YAMAHA and the Electronic
Industries Association’s Consumer Electronics
Group recommend you to avoid prolonged
exposure from excessive volume levels.
We Want You Listening For A Lifetime
4
SUPPLIED ACCESSORIES
After unpacking, check that the following parts are contained.
●Remote Control Transmitter
<RX-V1070> <RX-V870>
●Batteries (size AA, R6, UM-3)
●User Program Sheets
●Indoor FM Antenna
●AM Loop Antenna
●5 Speaker Configuration
< >RX-V1070
Front: 110W + 110W (8 )/135W + 135W (6 ) Ω Ω
RMS Output Power, 0.015% THD,
20–20,000 Hz
Center: 110W (8 )/135W (6 ) RMS Output Ω Ω
Power, 0.015% THD, 20–20,000 Hz
Rear: 30W + 30W (8Ω Ω)/40W + 40W (6 ) RMS
Output Power, 0.08% THD, 1,000 Hz
< >RX-V870
Front: 80W + 80W (8 )/95W + 95W (6 ) RMS Ω Ω
Output Power, 0.015% THD,
20–20,000 Hz
Center: 80W (8 )/95W (6 ) RMS Output Power, Ω Ω
0.015% THD, 20–20,000 Hz
Rear: 25W + 25W (8Ω Ω)/28W + 28W (6 ) RMS
Output Power, 0.08% THD, 1,000 Hz
●Digital Sound Field Processor (Including Dolby
Pro Logic Surround Decoder)
4 Programs for Audio Sources
4 Programs for Audio/Video Sources
●Automatic Input Balance Control for Dolby
Surround
●Test Tone Generator for Easier Speaker Output
Balance Adjustment
●3 Center Channel Modes
(NORMAL/WIDE/PHANTOM)
●40-Station Random Preset Tuning
●Video Signal Input/Output Capability (Including S
Video Connections)
●SLEEP Timer
●On Screen Displays Which Is Helpful in
Controlling This Unit
●Programmable Remote Control Transmitter
FEATURES
OPEN/CLOSE THE CONTROL DOOR for RX-V1070 only< >
When it is not necessary to operate controls inside the control door, close the door.
To close the door To open the door
5
PROFILE OF THIS UNIT
You are the proud owner of this Yamaha stereo receiver –an extremely sophisticated audio component. The Digital Sound Field
Processor (DSP) built into this unit takes full advantage of Yamaha’s undisputed leadership in the field of digital audio processing to
bring you a whole new world of listening experiences. Follow the instructions in this manual carefully when setting up your system,
and this unit will sonically transform your room into a wide range of listening environments –movie theater, concert hall, and so on.
In addition, you get incredible realism from Dolby-encoded video sources using the built-in Dolby Pro Logic Surround Decoder.
Rather than tell you about the wonders of digital sound field processing, however, let’s get right down to the business of setting up
the system and trying out its many capabilities. Please read this operation manual carefully and store it in a safe place for later
reference.
Digital Sound Field Processing
What is it that makes live music so good? Today’s advanced
sound reproduction technology lets you get extremely close to
the sound of a live performance, but chances are you’ll still
notice something missing: the acoustic environment of the live
concert hall. Extensive research into the exact nature of the
sonic reflections that create the ambience of a large hall has
made it possible for Yamaha engineers to bring you this same
sound in your own listening room, so you’ll feel all the sound of
a live concert.
What’s more, our technicians, armed with sophisticated
measuring equipment, have even made it possible to capture
the acoustics of a variety of venues such as an actual concert
hall, theater, etc. to allow you to accurately recreate one of
several actual live performance environments, all in your own
home.
Dolby Pro Logic Surround
The Dolby Pro Logic Surround Decoder program lets you
experience the dramatic realism and impact of Dolby Surround
movie theater sound in your own home. Dolby Pro Logic gets
its name from its professional-grade steering logic circuitry,
which provides greater effective channel separation for a much
higher degree of realism than the “passive” Dolby Surround
circuits found in today’s typical home audio/video equipment.
Dolby Pro Logic Surround provides a true center channel, so
that there are four independent channels, unlike passive Dolby
Surround which has in effect only three channels: left, right,
and rear. This center channel allows listeners seated in even
less-than-ideal positions to hear the dialog originating from
action on the screen while getting a stereo effect as well.
This Dolby Pro Logic Surround Decoder employs a digital
signal processing system. This system increases sound
stability at each channel and minimizes crosstalk between
channels compared to conventional analog Dolby signal
processing.
In addition, this unit features a built-in automatic input balance
control. This circuit always presents you the best surround
conditions without performing manual adjustments.
Dolby Pro Logic Surround + DSP
You can also enjoy Dolby Pro Logic with two modes of Digital
Surround field processing. These combinations expand the
surround effect. One is the “ENHANCED” Dolby Pro Logic
Surround, which recreates the surround effect of the 35 mm
film movie theater.
The other is the combination of Dolby Pro Logic and the sound
field program “70 mm MOVIE THEATER”, which recreates the
listening experience of a 70 mm film theater.
Directional Enhancement Circuit + DSP
The newly featured directional enhancement circuit expands
and focuses the digital sound field by emphasizing position of
sound.
This effect puts you in the midst of the action, while centering
and focusing your attention to the screen. This circuit is
available on the sound field program “TV THEATER”.
6
SPEAKER SETUP FOR THIS UNIT
SPEAKERS TO BE USED
This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The speakers to be used with this unit
will be mainly front speakers, rear speakers, and a center speaker. (You can omit the center speaker. Refer to the “4-Speaker
Configuration” shown below.)
The front speakers are used for the output of the main source sound and the effect sound. They will probably be the speakers of
your present stereo speaker system. The rear speakers are used for the output of the effect sound. And the center speaker is
used for the output of the center sound (most important effects as well as dialogue) encoded with the Dolby Surround. The rear
and center speakers do not need to be equal in power to the front speakers. However, all the speakers should have high enough
power handling to accept the maximum output of this unit.
SPEAKER CONFIGURATION
5-Speaker Configuration
This configuration is the most effective and is the one that is
recommended. In this configuration, the center speaker is
necessary as well as the rear speakers. If the digital sound
field program is in or DOLBY PRO LOGIC, ENHANCED TV
THEATER mode conversations will be output from the center
speaker and the ambience will be excellent.
●Set the center mode to the “ ” or “ ” position.NORMAL WIDE
(For details, refer to page 13.)
4-Speaker Configuration
The center speaker is not used in this configuration. If the
digital sound field program is in the ,DOLBY PRO LOGIC
ENHANCED TV THEATER or mode, the center sound is
output from the left and the right front speakers. However, the
sound effect of other programs can be the same as that of the
5-speaker configuration.
●Be sure to set the center mode to the “ ” position.PHANTOM
(For details, refer to page 13.)
SPEAKER PLACEMENT
The recommanded speaker configuration, the 5-speaker configuration, will require two speaker pairs: (your normalfront speakers
stereo speakers), and , plus a . When you place these speakers, refer to the following.rear speakers center speaker
Front: In normal position. (The position of your present
stereo speaker system.)
Rear: Behind your listening position, facing slightly inward.
Nearly six feet (approx. 1.8 m) up from the floor.
Center: Precisely between the front speakers. (To avoid
interference with TV sets, use a magnetically shielded
speaker. If, however, it is not effective, keep the
speaker away from TV sets.)
Front L Center Front R
Dialogue
Dialogue
Dialogue
DialogueDialogue
Surround sound
Surround sound
Surround sound
Surround soundSurround sound
Dialogue
Surround sound
Rear L Rear R
Front L Front R
Dialogue
Dialogue
Dialogue
DialogueDialogue
Surround sound
Surround sound
Surround sound
Surround soundSurround sound
Dialogue
Surround sound
Rear L Rear R
Front R
Center
Front L
TV set
Rear R
Rear L
7
CONNECTIONS
Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L
(left) to , (right) to , “ ” to “ ” and “ ” to “ ”. Also, refer to the owner’s manual for each component to be connected to this unit.L R R + + – –
: Refer to “ ” on page 10.ABOUT THE ACCESSORY TERMINALS
LD player Video cassette recorder 1
Compact disc player
Turntable
Tape deck 1
Video cassette recorder 2
or tape deck 2
Monitor TV Front speakers B
Right Left
Right Left
To AC outlet
(U.S.A. model)
Rear speakers
Front speakers A
Center speaker(s)
Right Left

Produktspezifikationen

Marke: Yamaha
Kategorie: Empfänger
Modell: RX-V1070

Brauchst du Hilfe?

Wenn Sie Hilfe mit Yamaha RX-V1070 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Yamaha

Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha RX-D 485 Bedienungsanleitung

2 Oktober 2024
Yamaha

Yamaha MusicCast RX-V 585 Bedienungsanleitung

5 September 2024
Yamaha

Yamaha RX-V870 Bedienungsanleitung

1 September 2024
Yamaha

Yamaha RX-S602 Bedienungsanleitung

26 August 2024
Yamaha

Yamaha MusicCast R-N803D Bedienungsanleitung

18 August 2024
Yamaha

Yamaha HTR-2071 Bedienungsanleitung

15 August 2024
Yamaha

Yamaha HTR-5850 Bedienungsanleitung

11 August 2024
Yamaha

Yamaha RX-V393 Bedienungsanleitung

7 August 2024
Yamaha

Yamaha MusicCast RX-S601 Bedienungsanleitung

6 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Jensen

Jensen CAR710-4BC Bedienungsanleitung

2 Dezember 2024
TechniSat

TechniSat HD-S 223 DVR Bedienungsanleitung

1 Dezember 2024
Hartke

Hartke GT60C Bedienungsanleitung

30 November 2024
Hartke

Hartke KM200 Bedienungsanleitung

30 November 2024
Kicker

Kicker CX360.4 Bedienungsanleitung

30 November 2024
Kicker

Kicker PXA300.4 Bedienungsanleitung

30 November 2024
Kicker

Kicker PXA200.1 Bedienungsanleitung

30 November 2024
Kicker

Kicker PXA300.1 Bedienungsanleitung

30 November 2024
Kicker

Kicker CX1800.1 Bedienungsanleitung

30 November 2024
Memphis Audio

Memphis Audio Mojo Pro MJP1500.1 Bedienungsanleitung

29 November 2024