Yamaha CM10V Bedienungsanleitung

Yamaha Lautsprecher CM10V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Yamaha CM10V (11 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/11

ENGLISHDEUTSCHFRANÇAISESPAÑOL

C112 /C115 /C215VVV

CM10 /CM12 /CM15VVV

C112 /C115VA VA

CW115 /CW118 /CW218VVV

Owner’s Manual

Thank you for choosing the YAMAHA speaker system.

In order to take maximum advantage of the speaker’s

features and ensure maximum performance and longev-

ity, please read this manual carefully before using the

speaker system. Keep the manual in a safe place for

future reference.

Bedienungsanleitung

Wir beglückwünschen Sie zum Kauf dieses YAMAHA

-Lautsprechersystems. Damit Sie die Ausstattungen die-

ses Lautsprechersystems optimal nutzen können, und

um maximale Leistung und Lebensdauer sicherzustel-

len, lesen Sie bitte vor der Inbetriebnahme diese Anlei-

tung sorgfältig durch. Bitte bewahren Sie diese Bedie-

nungsanleitung gut auf, um bei Bedarf darauf zurück-

greifen zu können.

Mode d’emploi

Nous vous remercions d’avoir acheté les enceintes

YAMAHA. Pour obtenir les performances optimales de

vos enceintes et garantir une longévité maximale, lisez

attentivement ce mode d’emploi avant d’utiliser les

enceintes. Conservez-le en lieu sûr pour pouvoir vous y

référer ultérieurement.

Manual de instrucciónes

Gracias por escoger el sistema de altavoces YAMAHA.

A ﬁn de aprovechar al máximo las características de los

altavoces y obtener un rendimiento y durabilidad ópti-

mos, lea atentamente este manual antes de utilizar el

sistema. Guarde este manual en un lugar seguro para

futuras consultas.

このたびは、ヤマハ製品をお買い求めいただきま

して、まことにありがとうございます。

スピーカーを安全にご使用いただき、優れた性能

を十分に生かして末永くご愛用いただくために、

この取扱説明書をご使用の前に必ずお読みくださ

い。お読みになったあとは保証書とともに保管し

てください。

取取

取取扱扱

扱扱説説

説説明明

明明書書

書書

SPEAKER SYSTEM

SUBWOOFER

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, re or other hazards. These precautions include, but are not limited to, the following:

• Do not open the device or attempt to disassemble the inter-

nal parts or modify them in any way. The device contains

no user-serviceable parts. If it should appear to be mal-

functioning, discontinue use immediately and have it

inspected by qualiﬁed Yamaha service personnel.

• Do not expose the device to rain, use it near water or in

damp or wet conditions, or place containers on it contain-

ing liquids which might spill into any openings.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the device or other property. These precautions include, but are not limited to, the following:

• If you use a stand, check the stand’s speciﬁcations and

make sure that it is sturdy enough to support the weight of

the speaker. You may need to limit the number of people

around the placed stand, in order to avoid toppling the

device or causing damage to the internal components.

• If you use speaker stands, be sure to keep the following

cautions.

– Use the speaker stands with their legs fully opened.

– Mount only one speaker on each speaker stand.

– Tighten fastening screws securely.

– Remove the speakers from the stands before moving

the stands or adjusting their height.

– Add weight such as sand bags around the stand legs to

prevent them from falling over.

– Use the stand at a maximum height of 140cm (55").

• If you use a metal socket of the CW115V/CW118V sub-

woofer to allow mounting of a satellite speaker, use a pole

shorter than 90cm (35.4") with an outer diameter of 35mm

(1-3/8").

• When transporting or moving the device, always use two or

more people.

• Before moving the device, remove all connected cables.

• Do not use the speaker’s handles for suspended installa-

tion. Doing so can result in damage or injury.

• Do not expose the device to excessive dust or vibrations,

or extreme cold or heat (such as in direct sunlight, near a

heater) to prevent the possibility of panel disﬁguration or

damage to the internal components.

• Do not place the device in an unstable position where it

might accidentally fall over.

• Before connecting the device to other devices, turn off the

power for all devices. Before turning the power on or off for

all devices, set all volume levels to minimum.

• Use only speaker cables for connecting speakers to the

speaker jacks. Use of other types of cables may result in

ﬁre.

• Be sure to observe the ampliﬁer’s rated load impedance

(see page 4), particularly when connecting speakers in

parallel. Connecting an impedance load outside the ampli-

ﬁer’s rated range can damage the ampliﬁer.

• Always turn AC power to the power ampliﬁer on last in any

audio system to avoid speaker damage. When turning

power off, the power ampliﬁer should be turned off ﬁrst for

the same reason.

• Do not use the device for a long period of time at a high or

uncomfortable volume level, since this can cause perma-

nent hearing loss. If you experience any hearing loss or

ringing in the ears, consult a physician.

• Do not operate the device if the sound is distorting. Pro-

longed use in this condition could cause overheating and

result in ﬁre.

Do not open Water warning

Location Connections

Handling caution

ENGLISH

• In any system using two or more speakers, be sure to match

the connection polarities of all speakers to the ampliﬁer(s) –

e.g. always connect “+” to “+” and “-” to “-”. If the polarities

are not properly matched the speakers will be driven out of

phase and the sound will suffer.

• Use only Neutrik NL4FC plugs for connecting Speakon con-

nectors.

* Illustrations in this manual are for explanatory purposes

only, and may not match the actual appearance of the prod-

uct during operation.

* Company names and product names used in this Owner’s

Manual are trademarks or registered trademarks of their

respective owners.

This product, when used in combination

with ampliﬁcation and/or additional loud-

speakers, may be capable of producing

sound levels that could cause permanent

hearing loss.

DO NOT operate at high volume levels or at

a level that is uncomfortable. If you experi-

ence any discomfort or ringing in the ears, or

suspect an hearing loss, you should consult

an audiologist.

To protect your speakers

When choosing a power ampliﬁer to use with your speakers,

make sure that its power output matches the speakers’ power

capacity (refer to the Speciﬁcations on page 7). Even if the

ampliﬁer’s power output is lower than the speakers’ PGM

(program) power capacity, the speakers may be damaged

when clipping of a high input signal occurs.

The following may cause damage to speakers:

• Feedback caused when using a microphone.

• Continuous high sound pressure level produced by elec-

tronic instruments.

• Continuous high-power output distorted signals.

• Popping noises caused by turning on equipment, or by

connecting or disconnecting system components while the

ampliﬁer is turned on.

Poly Switch

All full-range loudspeakers are ﬁtted with a self-resetting

poly switch that protects the high-frequency driver from

damage caused by excessive power.

If a loudspeaker cabinet loses high-frequency output, imme-

diately remove power from the unit and wait for two to three

minutes. They should allow the poly switch to reset. Re-

apply power and check the performance of the high-fre-

quency driver before continuing with the power reduced to a

level that does not cause the poly switch to interrupt the sig-

nal.

On the CW115V/CW118V/CW218V subwoofer, the Poly

Switch protects the woofer and a similar routine should be

followed if its output is lost.

Yamaha cannot be held responsible for damage caused by

improper use or modiﬁcations to the device.

Produktspezifikationen

Marke:	Yamaha
Kategorie:	Lautsprecher
Modell:	CM10V
Breite:	556 mm
Tiefe:	273 mm
Gewicht:	13300 g
Empfohlene Nutzung:	Studio
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Impedanz:	8 Ohm
Höhe:	349 mm
RMS-Leistung:	250 W
Audio Kanäle:	1.0 Kanäle
Anzahl des Antriebs:	2
Frequenzbereich:	70 - 16000 Hz
Woofer:	Ja
Tieftönerdurchmesser (imperial):	10 Zoll
Hochtöner:	Ja
Hochtönerdurchmesser (Imperial):	1 Zoll
Lautsprecherplatzierung:	Flur
Empfindlichkeit:	96 dB
Lautsprechertyp:	2-Wege
Musik Energie:	500 W