Worx WX743L.9 Bedienungsanleitung
Worx
Heißluftpistolen
WX743L.9
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Worx WX743L.9 (28 Seiten) in der Kategorie Heißluftpistolen. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
20V Cordless Mini Heat Gun
Mini pistolet thermique sans fil 20V
Mini pistola térmica inalámbrica de 20V
EN
F
ES
P02
P11
P20
2
EN
PRODUCT SAFETY
WARNING: Read all safety warnings and instructions.
Failure to follow all
instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING: This product can expose you to chemicals including lead and
Di(2-ethylhexyl)phthalate (DEHP) which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
The tool shall be recharged only with the specified charger for the battery. A charger that may
be suitable for one type of battery may create a risk of fire when used with another battery.
Use battery operated tool only with specifically designed battery pack. Use of any other
batteries may create a risk of fire.
When battery pack is not in use, keep it away from other metal objects like: paper, clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one termi-
nal to another. Shorting the battery terminals together may cause sparks, burns or a fire.
Do not incinerate the tool even if it is severely damaged. The batteries can explode in a fire.
ADDITIONAL SAFETY RULES FOR YOUR HOT AIR GUN
1. Always allow the heat gun to cool before storing. The hot nozzle can cause damage.
2. Never attempt to use the heat gun to dry animals, clothing or hair.
3. Do not leave the hot air gun unattended when in use.
4. This product is designed for light domestic use only, it is not designed for industrial
purposes and although every care has been taken to make the hot air gun safe,
accidents can happen. By following the simple safety guide, you can avoid serious
accidents.
5. Be aware that heat may be conducted to combustible materials that are out of sight.
6. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
Store indoors. Read instruction manual before using.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
3
EN
Children should be supervised to ensure that they do not play with the appliance
a) A short power-supply cord (or short detachable power-supply cord) is provided to reduce
the risks resulting from becoming entangled in or tripping over a longer cord.
b) Extension cords (or longer detachable power-supply cords) are available and may be used
if care is exercised in their use.
c) If an extension cord (or a long detachable power-supply cord) is used:
1) The marked electrical rating of the detachable power-supply cord or extension cord should
be at least as great as the electrical rating of the appliance;
2) If the appliance is of the grounded type, the extension cord should be a grounding type
3-wire cord
3) The longer cord should be arranged so that it will not drape over the countertop or tabletop
where it can be tripped over, snagged, or pulled on unintentionally (especially by children).
a) Hidden areas such as behind walls, ceilings, floors, soffit boards and other panels may
contain flammable materials that could be ignited by the heat gun when working in these
locations. The ignition of these materials may not be readily apparent and could result in
property damage and injury to persons.
When working in these locations, keep the heat gun moving in a back-and-forth motion.
Lingering or pausing in one spot could ignite the panel or the material behind it.
b) IMPORTANT SAFETY INSTRUCTIONS.
READ THESE INSTRUCTIONS
WARNING: Extreme care should be taken when stripping paint. The peelings, residue and
vapors of paint may contain lead, which is poisonous. Any pre-1977 paint may contain lead
and paint applied to homes prior to 1950 is likely to contain lead. Once deposited on surfaces,
hand to mouth contact can result in the ingestion of lead. Exposure to even low levels of lead
can cause irreversible brain and nervous system damage; young and unborn children are
particularly vulnerable.
Before beginning any paint removal process you should determine whether the paint
you are removing contains lead. This can be done by your local health department or by a
professional who uses a paint analyzer to check the lead content of the paint to be removed.
LEAD-BASED PAINT SHOULD ONLY BE REMOVED BY A PROFESSIONAL AND SHOULD
NOT BE REMOVED USING A HEAT GUN.
Persons removing paint should follow these guidelines:
1) Move the work piece outdoors. If this is not possible, keep the work area well ventilated.
Open the windows and put an exhaust fan in one of them. Be sure the fan is moving the air
from inside to outside.
2) Remove or cover any carpets, rugs, furniture, clothing, cooking utensils and air ducts.
3) Place drop cloths in the work area to catch any paint chips or peelings. Wear protective
clothing such as extra work shirts, overalls and hats.
4) Work in one room at a time. Furnishings should be removed or placed in the center of the
room and covered. Work areas should be sealed off from the rest of the dwelling by sealing
doorways with drop cloths.
5) Children, pregnant or potentially pregnant women and nursing mothers should not be
present in the work area until the work is done and all cleanup is complete.
6) Wear a dust respirator mask or a dual filter (dust and fume) respirator mask which has
Produktspezifikationen
| Marke: | Worx |
| Kategorie: | Heißluftpistolen |
| Modell: | WX743L.9 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Worx WX743L.9 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Heißluftpistolen Worx
14 Oktober 2024
Bedienungsanleitung Heißluftpistolen
- Heißluftpistolen Parkside
- Heißluftpistolen Vonroc
- Heißluftpistolen Black And Decker
- Heißluftpistolen Cocraft
- Heißluftpistolen Metabo
- Heißluftpistolen Steinel
- Heißluftpistolen Wagner
- Heißluftpistolen Meec Tools
- Heißluftpistolen Ozito
Neueste Bedienungsanleitung für -Kategorien-
13 Juli 2024
12 Juli 2024
8 Juli 2024
8 Juli 2024
8 Juli 2024
7 Juli 2024
6 Juli 2024
6 Juli 2024
6 Juli 2024