Worx WG268E Bedienungsanleitung

Worx Heckenschere WG268E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Worx WG268E (16 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
2
WARNING Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g)
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dust-related hazards.
3
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool will
do the job better and safer at the rate for
which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled
with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power
tool’s operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
1. Keep all parts of the body away from
the cutter blade. Do not remove
cut material or hold material to
be cut when blades are moving.
Make sure the switch is off when
clearing jammed material. A moment
of inattention while operating the hedge
trimmer may result in serious personal
injury.
2. Carry the hedge trimmer by the
handle with the cutter blade stopped.
When transporting or storing the
hedge trimmer always fit the cutting
device cover. Proper handling of the
hedge trimmer will reduce possible
personal injury from the cutter blades.
3. Hold the power tool by insulated
gripping surfaces only, because the
cutter blade may contact hidden

Produktspezifikationen

Marke: Worx
Kategorie: Heckenschere
Modell: WG268E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Worx WG268E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Heckenschere Worx

Worx

Worx WG286 Bedienungsanleitung

24 August 2024
Worx

Worx WG286.9 Bedienungsanleitung

24 August 2024
Worx

Worx WG263 Bedienungsanleitung

24 August 2024
Worx

Worx WG284.1 Bedienungsanleitung

24 August 2024
Worx

Worx WG284E Bedienungsanleitung

17 August 2024
Worx

Worx WG324 Bedienungsanleitung

8 August 2024
Worx

Worx WG252.9 Bedienungsanleitung

7 August 2024
Worx

Worx WG260E.9 Bedienungsanleitung

6 August 2024
Worx

Worx WG252E Bedienungsanleitung

30 Juli 2024
Worx

Worx WG801 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Heckenschere

Neueste Bedienungsanleitung für -Kategorien-

Kibani

Kibani WPET1206 - XXL Bedienungsanleitung

15 Oktober 2024
Ozito

Ozito PXCGSS-018 Bedienungsanleitung

11 Oktober 2024
Texas

Texas HTG360Li Bedienungsanleitung

8 Oktober 2024
Makita

Makita UH5520 Bedienungsanleitung

4 Oktober 2024
Stihl

Stihl HSE 52 Bedienungsanleitung

4 Oktober 2024
Hitachi

Hitachi FCH 48Y Bedienungsanleitung

3 Oktober 2024
Black And Decker

Black And Decker GT200 Bedienungsanleitung

1 Oktober 2024
Ryobi

Ryobi ONE+ OGS1820 Bedienungsanleitung

30 September 2024
Einhell

Einhell BG-EH 3551 T Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker GTC1850L Bedienungsanleitung

29 September 2024