Worx WG261 Bedienungsanleitung

Worx Heckenschere WG261

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Worx WG261 (24 Seiten) in der Kategorie Heckenschere. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
P02
P10
P17
20V Max Lithium Cordless Hedge Trimmer
Taille-haies sans fil de Lithium de 20V Maximum
Cortasetos Inalámbrico de litio de 20V máximo
EN
F
ES
2
WARNING: Some dust created by
power sanding, sawing, grinding,
drilling and other construction activities
contains chemicals known to the state of
California to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemical: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
WARNING: This product can expose you to
chemicals including lead, phthalate or
bisphenol A which are known to the State of
California to cause cancer, birth defects or other
reproductive harm. . Wash your hands after use
For more information go to
www.P65Warnings.ca.gov.
WARNING: Read all safety warnings and
instructions.
Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication.
A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times.
This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-
related hazards.
3
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any adjustments,
changing accessories, or storing power
tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation.
If damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking
into account the working conditions and
the work to be performed.
Use of the power
tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer.
A charger that is suitable
for one type of battery pack may create a risk of
fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs.
Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
1. Keep all parts of the body away from the
cutter blade. Do not remove cut material
or hold material to be cut when blades
are moving. Make sure the switch is off
when clearing jammed material. Blades
coast after turn off. A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
2. Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
3. Hold the power tool by insulated gripping
surfaces only, because the cutter blade
may contact hidden wiring or its own cord.
Cutter blades contacting a”live”wire may make
exposed metal parts of the power tool ”live”and
could give the operator an electric shock.
4. Keep hands away from blade. Contact with
blade will result in serious personal injury.
5. Use both hands when operating the hedge
trimmer. Using one hand could cause loss
of control and result in serious personal
injury.
6. Only use with handle and guard properly
assembled to hedge trimmer. The use of
the hedge trimmer without the proper
guard or handle provided may result in
serious personal injury
7. Check the hedge for foreign objects, e.g.
wire fences.
a) Do not dismantle, open or shred battery
pack.
b) Do not expose battery pack to heat or fire.
Avoid storage in direct sunlight.
c) Do not short-circuit a battery pack. Do not
store battery packs haphazardly in a box
or drawer where they may short-circuit
each other or be short-circuited by other
metal objects. When battery pack is not in use,
keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or fire.

Produktspezifikationen

Marke: Worx
Kategorie: Heckenschere
Modell: WG261

Brauchst du Hilfe?

Wenn Sie Hilfe mit Worx WG261 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Heckenschere Worx

Worx

Worx WG286 Bedienungsanleitung

24 August 2024
Worx

Worx WG286.9 Bedienungsanleitung

24 August 2024
Worx

Worx WG263 Bedienungsanleitung

24 August 2024
Worx

Worx WG284.1 Bedienungsanleitung

24 August 2024
Worx

Worx WG284E Bedienungsanleitung

17 August 2024
Worx

Worx WG324 Bedienungsanleitung

8 August 2024
Worx

Worx WG252.9 Bedienungsanleitung

7 August 2024
Worx

Worx WG260E.9 Bedienungsanleitung

6 August 2024
Worx

Worx WG252E Bedienungsanleitung

30 Juli 2024
Worx

Worx WG801 Bedienungsanleitung

30 Juli 2024

Bedienungsanleitung Heckenschere

Neueste Bedienungsanleitung für -Kategorien-

Kibani

Kibani WPET1206 - XXL Bedienungsanleitung

15 Oktober 2024
Ozito

Ozito PXCGSS-018 Bedienungsanleitung

11 Oktober 2024
Texas

Texas HTG360Li Bedienungsanleitung

8 Oktober 2024
Makita

Makita UH5520 Bedienungsanleitung

4 Oktober 2024
Stihl

Stihl HSE 52 Bedienungsanleitung

4 Oktober 2024
Hitachi

Hitachi FCH 48Y Bedienungsanleitung

3 Oktober 2024
Black And Decker

Black And Decker GT200 Bedienungsanleitung

1 Oktober 2024
Ryobi

Ryobi ONE+ OGS1820 Bedienungsanleitung

30 September 2024
Einhell

Einhell BG-EH 3551 T Bedienungsanleitung

30 September 2024
Black And Decker

Black And Decker GTC1850L Bedienungsanleitung

29 September 2024