Winix A231 Bedienungsanleitung

Winix Luftreiniger A231

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Winix A231 (2 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

WHERE TO USE

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other electronics

Electromagnetic interference from certain electronics may cause

product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and

vibrations.

Allow 12 ~ 18 in. from walls

For maximum air flow.

FRONT BACK

PACKAGE CONTENTS

Smart Sensor

Air Outlet Vent

Power Plug

Control Panel

Front Panel

Unit 360º All-in-One

True HEPA Filter

User

Manual

MODEL PART DIAGRAM

01. Filter Replacement Indicator

LED light indicates when it is time to change the

filter.

02. Filter Reset Button

After replacing the 360º All-in-One True HEPA

Filter, use a small object such as a paper clip, to

press and hold the Filter Reset Button for at least

5 seconds until the Filter Replacement Indicator

turns off.

03. Auto Mode Button

The unit will default to Auto with PlasmaWave

enabled when first powered on.

• Auto Mode automatically adjusts fan speeds

according to your indoor air quality. The fan

speed will adjust to low when air quality is good,

medium when fair, and to high when poor.

04. Air Quality Indicator

Color coded LED light indicates one of three levels

of Air Quality:

Red (poor), Amber (fair), and Blue (good).

05. Sleep Mode Button

When Sleep Mode is activated, the Air Quality

Indicator LED light is disabled.

• Fan speed will automatically set to minimum

speed (lower than 'Low') which will be nearly

silent.

• When Sleep Mode is active, PlasmaWave

will be

disabled, but it can be turned back on.

CONTROL PANEL

INITIAL OPERATION

1. Turn the product upside down.

2. Grab the handle at the bottom of the

product, turn counter-clockwise, and pull

out the filter cover.

3. Remove the protective vinyl from the filter

installed inside the product.

4. Install the filter top side down into the

bottom of unit until it is fully inserted. The

top of the filter shows the opening and the

bottom of the filter is solid.

5. After installing the filter, turn the handle

clockwise to close the filter cover.

6. Return the product to an upright position

and resume normal operation.

When to Replace Filters

Filter Indicator Light When to Service When to Replace

360º All-in-One

True HEPA Filter Clean once every 14 days

Lasts Approx. 12 months

• When the Check Filter indicator LED is on, it is time to replace the All-in-One True HEPA Filter.

• Intervals between filter replacement may vary depending on environment.

MAINTENANCE

1712-0110-00

FILTER

REPLACING FILTERS

Resetting Filter Life:

After replacing the 360º All-in-One True HEPA Filter, use a small object such as a

paper clip, to press and hold the Filter Reset Button for at least 5 seconds until the

Filter Replacement Indicator turns off.

CLEANING CARE

Cleaning the Filters:

Clean with a vacuum or a soft brush.

• Only clean the Pre-Filter.

• This filter CAN NOT be washed.

• Intervals between filter cleaning may vary

depending on the air quality.

Cleaning the Exterior & Interior:

Wipe with a soft damp cloth using room

temperature water. Afterwards, wipe it down with

a clean dry cloth.

After turning the product upside down, remove the

filter cover and clean the interior with a vacuum

cleaner.

• For optimal performance, clean every 14 days.

N O T I C E

• When cleaning the unit, always unplug the power cord first and then wait until the unit has cooled

down.

• Never disassemble, repair, or modify this unit yourself.

• Do not use flammable sprays or liquid detergents.

• Do not allow children to clean or maintain the unit.

• Before cleaning or maintaining, ensure unit is unplugged.

• Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.

06. PlasmaWave

Button

Enables or disables PlasmaWave

"When the unit is running, you may hear a chirping

or buzzing sound. The sound is from large

particles passing through PlasmaWave

, it is

normal and does not signify product failure."

Press the PlasmaWave

Technology button when

the unit is on to enable or disable this feature.

07. Fan Speed Indicator Buttons

Indicates the current fan speed.

• Use the Fan Speed arrow buttons to set the

desired fan speed. Fan speeds cycle over in this

sequence: Auto, Low, Medium, High, Auto.

Low Medium High

08. Power Button

Turns the unit on or off. During the first 30

seconds of power, the Air Quality Indicator will

cycle through Blue, Amber and Red colors.

• Smart Sensor takes approximately 4 minutes to

detect the air quality in the environment before

normal operation begins.

UNIT SPECIFICATIONS

Model Name A231 / A230 Dimensions

9.5 in(W) x 9.5 in(D) x 14.6 in(H)

Power Volt age

AC 120 V / 60 Hz

Wei ght 6.75lbs

Power Rate 55W Replacement

Filter FILTER O/SKU: 1712-0110-00

Veri fied Room Si ze 230sq.ft.

The exterior, design, and product specifications may be changed without prior notice to improve product performance.

Contact Winix for product related inquiries and customer service

•Dedicated Call Center: ☎ (877) 699-4649

•Website: www.winixamerica.com

To expedite service, please specify the model name and number, the nature of the problem,

your contact information, and your address.

4-STAGE

AIR PURIFICATION Activated Carbon Filter

Fine Mesh Pre-Filter

True HEPA Filter

PlasmaWave

Air Purification means it

removes inanimate particles

The energy efﬁciency of this ENERGY STAR

certiﬁed model is measured based on a ratio

between the model’s CADR for smoke and the

electrical energy it consumes, or CADR/Watt.

Do not pull on the power cord when

unplugging the unit.

Do not tie or knot the power cord when unit

is in operation.

If the unit becomes submerged in water,

unplug it and contact customer service.

Do not unplug or move the unit while in

operation.

Do not plug additional appliances into the

same outlet or power supply.

Do not touch the plug with wet hands.

Unplug the unit when not in operation for

extended periods of time.

Do not place around heating elements.

Do not use around mist or fumes from

industrial oil or around large quantities of

metallic dust.

The cord can become damaged by forcefully

bending, pulling, twisting, bundling, pinching

or placing heavy objects on it.

Do not install in any sort of motor or

transport vehicle (trucks, boats, ships,

etc.).

Do not place in an area with excessive

amounts of noxious gases.

Do not place near any flammable materials

(aerosols, fuel, gases, etc.).

Do not have the unit facing into wind or

drafts.

Do not place below any electrical outlet.

Do not place in excessively humid areas

where the unit may become wet.

To reduce the risk of fire or electric shock,

do not use this fan with any solid-state

speed control device.

Do not place unit closer than 12 inches

from the wall during operation. It may

cause condensation on the wall and the

surrounding area.

SAFETY AND CAUTIONS

Before operating this equipment, carefully read and

follow these safety cautions.

Ensure filters are inserted before running unit.

Running the unit without filters may shorten the

lifespan of the unit and cause electric shock or

injury.

Be sure foreign objects are NOT inserted into the

vents on the unit.

Objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit

with wet hands.

The high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become

blocked.

Blockage may lead to increased internal

temperatures, causing product failure and

deformation.

Do not use the unit as a step stool or place heavy

objects on it.

Personal injury may occur or product failure and

deformation.

When turning the product upside down, install the

filter with care in the direction that the bottom

(blocked) side of the filter is visible from the top.

If the filter direction is not installed properly, it may

cause product damage and user injury.

W A R N I N G

Follow these instructions to reduce the risk of

serious injury or death and to reduce risk of

damaging the unit.

• If the power cord is damaged, it must be replaced

with a special cord. Assembly available from the

manufacturer or its service agent.

• This appliance is not intended for use by

a person (including children) with reduced

physical sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction concerning

use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• This unit is not intended to be used to preserve

documents or in art conservation.

SAFETY INSTRUCTIONS

Thank you for purchasing a Winix air purifier. This product is for household use only.

• Do not repair or modify the unit. All repairs

should be completed by a qualified technician.

• The plug for this unit is polarized with one blade

wider than the other. Do not force the plug into

an electrical outlet. Do not alter the plug in

any way. If the plug does not fit into the outlet,

reverse the plug. If it still does not fit, contact a

qualified technician to install a proper outlet.

• Do not use if the power cord or plug is damaged

or the connection to the wall outlet is loose.

• Use AC 120 V only.

• Do not damage, break, forcefully bend, pull, twist,

bundle, coat, pinch, or place heavy objects on

the power cord.

• Periodically remove dust from the power plug.

This will reduce the risk of shock due to humidity

build up.

• Remove the power plug from the outlet before

cleaning the unit. When removing the power

plug, grasp by holding the plug itself, never hold

by the cord.

• If the power plug is damaged, it must be replaced

by the manufacturer or a qualified technician.

• Remove the power plug from the outlet when not

in use.

• Do not handle the power plug with wet hands.

• Do not operate the unit when using indoor

smoke-generating insecticides.

• Do not clean unit with benzene or paint thinner.

Do not spray insecticides on the unit.

• Do not use the unit where it is humid or where

the unit may become wet, such as the bathroom.

• Do not insert fingers or foreign objects into air

intake or outlet.

• Do not use the unit near flammable gases. Do

not use near cigarettes, incense, or other spark-

creating items.

• Unit will not remove carbon monoxide emitted

from heating appliances or other sources.

IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER

WARNING:

Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.

IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER

• Do not block the intake or outlet vents.

• Do not use near hot objects, such as a stove.

• Do not use where the unit may come into contact with steam.

• Do not use the unit on its side.

• Keep away from products that generate oily residue, such as a deep fryer.

• Do not use detergent to clean the unit.

• Do not operate without a filter.

• Do not wash and reuse the True HEPA Filter.

• Hold the handle on the back of the unit to transport.

• Do not hold by the front panel.

• Do not stick any small objects in the air outlet vents or fan.

TWO YEARS WARRANTY

The terms of the warranty are as follows.

1. This product is manufactured under stringent

quality control and inspections.

2. The warranty will be voided if product failure

is a result of negligence or misuse by the

consumer.

3. A proof of purchase must be presented upon

claiming a Product Warranty.

4. Store the proof of purchase in a safe place or

upload your proof of purchase.

5. This warranty is valid only in the USA and

Canada.

* for more information visit

https://winixamerica.com/terms-and-conditions/

Product Name

Air Purifier

Model Name

A231 / A230

Purchase Date

Warranty Period

Two (2) Years

Place of Purchase

tel .

Customer

Address

Name

Tel.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or on experienced radio / TV technician for help.

This device contains license-exempt transmitter(s) / receiver(s) that comply with Innovation, Science

and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following

two conditions:

• This device may not cause interference.

• This device must accept any interference, including interference that may cause undesired operation

of the device.

"In French: Cet appareil contient des émetteurs/récepteurs exemptés de licence et conformes

aux normes Innovation, Science et Economic. RSS(s) sans licence de Développement Canada. Le

fonctionnement est soumis aux deux conditions suivantes:

• cet appareil ne doit pas causer d’interférences nuisibles, et

• cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un

fonctionnement non souhaité."

A231 / A230 USER MANUAL

AIR PURIFIER

• The product warranty is printed on the back of this guide. This product is manufactured for use

only in USA / CA. This product is suitable for 120 V only.

2610-0317-00 Rev.01

Produktspezifikationen

Marke:	Winix
Kategorie:	Luftreiniger
Modell:	A231

Brauchst du Hilfe?

Wenn Sie Hilfe mit Winix A231 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Luftreiniger Winix

Winix AUS-5500 Bedienungsanleitung

14 Oktober 2024

Winix Tower Q Bedienungsanleitung

1 Oktober 2024

Winix U300EU Bedienungsanleitung

23 August 2024

Winix P300UK Bedienungsanleitung

22 August 2024

Winix ZERO+ AUS-1050AZBU Bedienungsanleitung

22 August 2024

Winix P450EU Bedienungsanleitung

20 August 2024

Winix NK305 - Tower Q Bedienungsanleitung

12 August 2024

Winix Zero Pro Bedienungsanleitung

5 August 2024

Winix AZPU373-HWE - Zero plus Wifi Bedienungsanleitung

3 August 2024

Winix D480 Bedienungsanleitung

28 Juli 2024

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-

Trotec TAC 5000 Bedienungsanleitung

16 Oktober 2024

Duux DXPU07 Bright Bedienungsanleitung

16 Oktober 2024

Taurus AP2030 Bedienungsanleitung

16 Oktober 2024

TruSense Z-2000 Bedienungsanleitung

16 Oktober 2024

Ulsonix AIRCLEAN 20G Bedienungsanleitung

16 Oktober 2024

Philips AC5602 Bedienungsanleitung

15 Oktober 2024

Homedics AR-35 Bedienungsanleitung

14 Oktober 2024

Vax AP02 Bedienungsanleitung

10 Oktober 2024

Whynter AFR-300 Bedienungsanleitung

10 Oktober 2024

Samsung AX32BG3100GB Bedienungsanleitung

9 Oktober 2024