Whirlpool WFE500M4HS Bedienungsanleitung

Whirlpool Ofen WFE500M4HS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool WFE500M4HS (32 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
INSTALLATION INSTRUCTIONS 24" (61.0 CM)
FREESTANDING ELECTRIC RANGES
INSTRUCTIONS D’INSTALLATION
POURCUISINIÈRES ÉLECTRIQUES
AUTOPORTANTES DE 24PO(61,0CM)
Table of Contents / Table des matières
IMPORTANT:
Save for local electrical inspector’s use.
IMPORTANT :
Conserver ces instructions à l’usage de l’inspecteur des installations électriques local.
W11169656B
RANGE SAFETY .............................................................................2
INSTALLATION REQUIREMENTS .................................................3
Tools and Parts .............................................................................3
Location Requirements ................................................................3
Electrical Requirements ...............................................................5
INSTALLATION INSTRUCTIONS ...................................................7
Unpack Range..............................................................................7
Backguard Assembly ...................................................................7
Install Anti-Tip Bracket .................................................................8
Electrical Connection - U.S.A. Only .............................................9
Verify Anti-Tip Bracket Is Installed
and Engaged ..............................................................................13
Level Range ................................................................................14
Storage Drawer ..........................................................................14
Complete Installation .................................................................14
Moving the Range ......................................................................15
SÉCURITÉ DE LA CUISINIÈRE ...................................................16
EXIGENCES D’INSTALLATION ...................................................17
Outils et pièces ...........................................................................17
Exigences d’emplacement .........................................................17
Spécications électriques ..........................................................19
INSTRUCTIONS D’INSTALLATION .............................................21
Déballage de la cuisinière ..........................................................21
Dosseret 21 .....................................................................................
Bride antibasculement ...............................................................22
Raccordement électrique – É.-U. seulement .............................23
Vérier que la bride antibasculement est bien installée et en-
gagée 27 ..........................................................................................
glage de l’aplomb de la cuisinière .........................................28
Tiroir de remisage .......................................................................28
Terminer l’installation ..................................................................28
Déplacement de la cuisinière .....................................................29
2
RANGE SAFETY
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation instructions.
Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
WARNING
Anti-Tip
Bracket
Range Foot
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Tape measure
Flat-blade screwdriver
Phillips screwdriver
Level
Hammer
Hand or electric drill
Wrench or pliers
Marker or pencil
Masking tape
3/8" (1 cm) and 5/16" (7.9 mm) nut driver
1/8" (3.2 mm) drill bit (for wood oors)
Parts Supplied
Check that all parts are included.
Anti-tip bracket must be securely mounted to oor or wall.
Thickness of ooring may require longer screws to anchor
bracket to oor.
Parts needed
If using a power supply cord kit:
A UL listed power supply cord kit marked for use with
ranges. The cord should be rated at 250 V minimum, 40A
or 50 A that is marked for use with nominal 1³⁄8" (3.5 cm)
diameter connection opening and must end in ring terminals
or open-end spade terminals with upturned ends.
A UL listed strain relief.
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section.
It is recommended that all electrical connections be made
by a licensed, qualied electrical installer.
A
B
C
A. Anti-tip bracket
B. #12 x 1" screws (2)
C. Plastic Anchors (2)
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
It is the installer’s responsibility to comply with the installation
clearances specied in this installation instructions. The
model/serial/rating plate is located under the storage drawer.
See the installation instructions on instructions on how to
remove the storage drawer.
Cabinet opening dimensions that are shown must be used.
Given dimensions are minimum clearances.
The anti-tip bracket must be installed. To install the anti-tip
bracket shipped with the range, see “Install Anti-Tip Bracket”
section.
Grounded electrical supply is required. See “Electrical
Requirements” section.
IMPORTANT: To avoid damage to your cabinets, check with your
builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damage. This oven
has been designed in accordance with the requirements of UL
and CSA International and complies with the maximum allowable
wood cabinet temperatures of 194°F (90°C).
Mobile Home - Additional Installation Requirements
The installation of this range must conform to the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280). When such standard is
not applicable, use the Standard for Manufactured Home
Installations, ANSI A225.1/NFPA 501A or with local codes.
In Canada, the installation of this range must conform with
the current standards CAN/CSA-Z240-latest edition, or with local
codes.
Mobile home installations require:
When this range is installed in a mobile home, it must be
secured according to the instructions in this document.
Four-wire power supply cord or cable must be used in a
mobile home installation. The appliance wiring will need to be
revised. See “Electrical Connection - U.S.A. Only” section.


Produktspezifikationen

Marke: Whirlpool
Kategorie: Ofen
Modell: WFE500M4HS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool WFE500M4HS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ofen Whirlpool

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-