Whirlpool WEC530H0DB Bedienungsanleitung

Whirlpool Backöfen WEC530H0DB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool WEC530H0DB (32 Seiten) in der Kategorie Backöfen. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
INSTALLATION INSTRUCTIONS
30" (76.0 CM) SLIDE-IN ELECTRIC RANGES
INSTRUCTIONS DINSTALLATION DES CUISINIÈRES
ÉLECTRIQUES ENCASTRABLES DE 30" (76,0 CM)
Table of Contents/Table des matières
RANGE SAFETY .............................................................................2
INSTALLATION REQUIREMENTS ................................................3
Tools and Parts ............................................................................3
Location Requirements................................................................3
Electrical Requirements - U.S.A. Only.........................................6
Electrical Requirements - Canada Only.......................................7
INSTALLATION INSTRUCTIONS ..................................................8
Unpack Range..............................................................................8
Install Anti-Tip Bracket.................................................................8
Adjust Leveling Legs....................................................................9
Level Range................................................................................10
Electrical Connection - U.S.A. Only...........................................10
Verify Anti-Tip Bracket is Installed and Engaged ......................15
Remove/Replace Drawer...........................................................16
Oven Door ..................................................................................16
Complete Installation .................................................................17
CURI DE LA CUISINIÈRE ...................................................19
EXIGENCES DINSTALLATION...................................................20
Outillage et pièces......................................................................20
Exigences demplacement.........................................................20
Spécifications électriques Canada seulement........................23
INSTRUCTIONS DINSTALLATION.............................................24
ballage de la cuisinière ..........................................................24
Installation de la bride antibasculement ....................................24
Réglage des pieds de nivellement .............................................25
Réglage de laplomb de la cuisinière .........................................26
rifier que la bride antibasculement
est bien installée et engagée......................................................26
pose et repose du tiroir..........................................................27
Porte du four...............................................................................27
Achever l’installation ..................................................................28
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
W10665255A
2
RANGE SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation instructions.
Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
Anti-Tip
Bracket
To verify the anti-tip bracket is installed and engaged:
Slide range forward.
Look for the anti-tip bracket securely attached to floor or wall.
Slide range back so rear range foot is under anti-tip bracket.
See installation instructions for details.
Range Foot
WARNING
3
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
Check that all parts are included.
3 - 10-32 hex nuts (attached to terminal block)
3 - Direct wire lugs
2 - #10 x 1⁵⁄₈" (4.1 cm) screws (for mounting anti-tip bracket)
Anti-tip bracket (inside oven cavity)
Anti-tip bracket must be securely mounted to the back wall or
floor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store.
For model:
Parts needed
If using a power supply cord kit:
A UL listed power supply cord kit marked for use with ranges.
The cord should be rated at 250 volts minimum, 40 amps or
50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm)
diameter connection opening and must end in ring terminals
or open-end spade terminals with upturned ends.
A UL listed strain relief.
Check local codes. Check existing electrical supply. See the
appropriate “Electrical Requirements” section.
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Optional Parts
To purchase these or any other accessories, please reference the
“Accessories” section of the User Guide for contact information.
Side Trim Kits:
White - Order Part Number W10677527
Black - Order Part Number W10675026
Stainless Steel - Order Part Number W10675028
Backsplash Kits:
High 6" (15.2 cm) White - Order Part Number W10655448
High 6" (15.2 cm) Black - Order Part Number W10655449
High 6" (15.2 cm) Stainless Steel - Order Part Number
W10655450
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
It is the installer’s responsibility to comply with installation
clearances specified on the model/serial rating plate. The
model/serial rating plate is located behind the oven door on
the top right-hand side of the oven frame.
The range should be located for convenient use in the
kitchen.
Recessed installations must provide complete enclosure of
the sides and rear of the range.
To eliminate the risk of burns or fire by reaching over heated
surface units, cabinet storage space located above the
surface units should be avoided. If cabinet storage is to be
provided, the risk can be reduced by installing a range hood
or microwave hood combination that projects horizontally a
minimum of 5" (12.7 cm) beyond the bottom of the cabinets.
All openings in the wall or floor where range is to be installed
must be sealed.
Cabinet opening dimensions that are shown must be used.
Given dimensions are minimum clearances.
The anti-tip bracket must be installed. To install the anti-tip
bracket shipped with the range, see “Install Anti-Tip Bracket”
section.
Grounded electrical supply is required. See the appropriate
“Electrical Requirements” section.
Contact a qualified floor covering installer to check that the
floor covering can withstand at least 200°F (93°C).
Use an insulated pad or ¼" (0.64 cm) plywood under range if
installing range over carpeting.
IMPORTANT: To avoid damage to your cabinets, check with your
builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damage. This oven
has been designed in accordance with the requirements of UL
and CSA International and complies with the maximum allowable
wood cabinet temperatures of 194°F (90°C).
Tape measure
Flat-blade screwdriver
Phillips screwdriver
Level
Hand or electric drill
Wrench or pliers
Marker or pencil
Masking tape
¼" (13 mm) drive ratchet
¼" (13 mm) nut driver
³⁄₈" (10 mm) and ⁵⁄₁₆" (8 mm)
nut driver
¹⁄₈" (3 mm) drill bit (for wood
floors)
Tin snips or large wire
cutters (for cutting ground
strap if necessary)
IEL730C
WEC530H0D
WEE730H0D
YIEL730C
YWEE730H0D
JES1450CD
JES1450D
JIS1450CD
JIS1450D
KSEG700E
KSEB900E
KSIB900E
MES8880D
WEE760H0D
YKSEG700E
YKSEB900E
YKSIB900E
YMES8880D
YWEE760H0D
Oven racks 2 3


Produktspezifikationen

Marke: Whirlpool
Kategorie: Backöfen
Modell: WEC530H0DB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool WEC530H0DB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Backöfen Whirlpool

Bedienungsanleitung Backöfen

Neueste Bedienungsanleitung für -Kategorien-