Whirlpool WDP560HAMB Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Whirlpool WDP560HAMB (11 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
1
Dishwasher Cycle and Options Guide
IMPORTANT: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in
your appliance's Owner's Manual, before operating this appliance.
Control panel appearance may vary depending on your model.
Cycle Guide
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
Cycles: Descriptions: Soil Level: Estimated Wash
Time (Hr:Min):
Added Water
Usage Gallons
(Liters):
Heavy Use for hard-to-clean, heavily soiled pots, pans,
casseroles, and regular tableware. Includes a heated
drying option.
Heavy/Baked-On 2:30ā€“3:30 7.5 (28.3)
Normal This cycle is recommended for daily, regular, or typical
use to completely wash and dry a full load of normally
soiled dishes. This dishwasherā€™s government energy
certifications were based on the Normal cycle with
only the Heat Dry option selected.**
Light to Heavy 2:00ā€“3:30 3.0ā€“7.5
(11.4ā€“28.1)
Quick Wash For fast results, this cycle will clean dishes using
slightly more water and energy. For improved drying,
select a heated drying option.
NOTE: Some detergents are not recommended for
short wash cycles; please refer to your detergent
packaging for more information.
All Soil Levels 1:00ā€“1:05 5.8 (21.9)
Extended
Soak
This cycle quietly soaks dishes with an extended
prewash which eliminates the need to presoak dishes,
saving personal time and effort. For optimal cleaning
results during this cycle, add prewash detergent. Use
this cycle for loads with heavy amounts of dried-on or
hard-to-clean baked-on food. This cycle includes a
heated drying option.
Dried-On/Baked-
On
6:40ā€“7:35 7.5 (28.3)
Boost This cycle is more aggressive than the Normal Cycle
using a higher amount of energy, water and
temperature along with a longer cycle time to provide
improved cleaning performance. This cycle includes
the heated dry option.*
All Soil Levels 2:00ā€“3:30 4.4ā€“7.5 (16.7ā€“28.3)
*The government energy certifications are not based on this cycle and may increase your energy usage. See the Normal cycle
description for the government energy certification cycle.
**No other washing and drying temperature options were selected, and the dishwasher was not subjected to truncated testing. Rinse aid
was not used, and there was no detergent used in the prewash.
2
Option Guide
Options: Descriptions: Can Be
Selected
With:
What It Does: Added Time to
Cycle (Hr:Min):
Added Water
Gallons (Liters):
High (Hi)
Temp
Raises the main wash
temperature to improve cleaning
for loads containing tough, baked-
on food.
Heavy
Normal
Raises the main wash
temperature up to
135Ā°F (57Ā°C).
0:35ā€“0:45 0ā€“3.7 (0ā€“14.0)
Heat Dry Dries dishes with heat. This
option, with the use of rinse aid,
will provide better drying
performance. Plastic items are
less likely to deform when loaded
in the top rack.
Turn the Heat Dry option off for an
air dry.
Heavy
Normal
Uses a heating
element to speed
drying times.
0:52 0
4 Hour (Hr)
Delay
Runs dishwasher at a later time.
Select a wash cycle and options.
Select 4 Hr Delay. Select Start/
Resume. Close door firmly.
NOTE: Anytime door is opened
(such as, to add a dish), Start/
Resume must be selected again
to resume delay countdown.
Available with
any cycle
Delays the start of a
cycle to the specified
duration.
4:00 0
Control
Lock
(Hold 3
Sec)
Use the Control Lock option to avoid unintended use of dishwasher between cycles or cycle and option changes during
a cycle. To turn on Control Lock, press and hold 4 Hour Delay for 3 seconds. Control Lock light will stay on for a short
time, indicating that it is activated. When the Lock indicator is lit, all buttons are disabled. If you press any button while
your dishwasher is locked, the light flashes three times. The dishwasher door can still be opened/closed while the
controls are locked.
To turn off Control Lock, press and hold 4 Hour Delay for 3 seconds. Control Lock light turns off.
On some models, to active the Control Lock, press and hold the Sani Rinse button for 3 seconds to lock.
Sani Rinse Sanitizes dishes and glassware in
accordance with NSF International
NSF/ANSI Standard 184 for
Residential Dishwashers. Certified
residential dishwashers are not
intended for licensed food
establishments. Only sanitizing
cycles have been designed to
meet the requirements of the NSF/
ANSI 184 performance standard
for soil removal and for
sanitization efficacy. There is no
intention, either directly or
indirectly, that all cycles on a NSF/
ANSI 184 certified dishwasher
meet the NSF/ANSI 184
performance standard for soil
removal and for sanitization
efficacy. The Sani Rinse indicator
glows at the end of the cycle if the
Sani Rinse option was
successfully completed. If the
indicator does not activate, it is
probably due to the cycle being
interrupted.
Sensor
Heavy
Normal
Raises the main wash
temperature to 130Ā°F
(54Ā°C) and the final
rinse temperature to
155Ā°F (68Ā°C).
1:00ā€“1:30 0ā€“2.6 (0ā€“10.0)
3
Options: Descriptions: Can Be
Selected
With:
What It Does: Added Time to
Cycle (Hr:Min):
Added Water
Gallons (Liters):
Target
Clean
Activates the TargetCleanā„¢ spray
jets and provides intensified water
spray to back of lower level rack.
May add heat and time to cycle.
Sensor
Heavy
Normal
Soak & Clean
Activates the
TargetCleanā„¢ spray
jets to provide
intensified cleaning
power to specific wash
areas.
0:12ā€“0:57 0ā€“4.8 (0ā€“18.2)
Delay Delay displays how many hours
before the cycle will begin. To
delay the start:
1. Select a wash cycle and
options.
2. Select Delay. Each time you
press Delay, it will display the
next available delay time.
3. Select Start to begin the delay
countdown.
NOTE: If the door is opened,
such as to add a dish, the
Start button must be selected
to resume the delay
countdown.
Available with
any cycle
Delays the start of a
cycle to the specified
duration.
0:00 0
Control Guide
Control: Purpose: Comments:
Start
Resume
To start or resume a wash
cycle.
If the door is opened during a cycle or the power is interrupted, the Start indicator
flashes. The cycle will not resume until the door is closed and Start is selected.
NOTE: If the Start button is located on top of door, push door firmly closed within 4
seconds of selecting Start. If the door is not closed within 4 seconds, the Start button
LED will flash, an audible tone will be heard (on some models), and the cycle will not
start.
Cancel
Drain
(Hold 3
Sec)
To reset any cycle or
options during selection. To
cancel a wash cycle after it
has started.
Close the door firmly. Press and hold Cancel/Drain for 3 seconds. The dishwasher starts
a 2-minute drain (if needed). Let dishwasher drain completely.
Clean
Or Clean
Sanitized
To follow progress of your
dishwasher cycle.
NOTE: Indicators shown are
not available on all models.
The Clean indicator glows when a cycle is finished.


Produktspezifikationen

Marke: Whirlpool
Kategorie: SpĆ¼lmaschine
Modell: WDP560HAMB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool WDP560HAMB benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung SpĆ¼lmaschine Whirlpool

Bedienungsanleitung SpĆ¼lmaschine

Neueste Bedienungsanleitung fĆ¼r -Kategorien-