Whirlpool SW8 AM2Y WR 2 Bedienungsanleitung

Whirlpool Kühlschrank SW8 AM2Y WR 2

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool SW8 AM2Y WR 2 (1 Seiten) in der Kategorie Kühlschrank. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
EN
1. External indicators of Power On and alarms
2. Control panel
3. Main LED ‘s lighting
4. Fan
5. Lighting in Multi-flow*
6. Shelf divider*
7. Multi-flow cold air area*
8. Bottle rack *
9. Sensor cover
10. Zero degrees drawer*
11. Rating plate with commercial name
12. Cooler compartment (best for meat and fish)
13. Area shelves
14. Fruits and vegetables crisper
15. Crisper divider *
16. Door reversibility kit
17. Egg tray*
18. Bottle holder*
19. Door trays
20. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply,
the display lights up and all the icons appear on the
display for approximately 1 second. The default (factory)
values of the freezer compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary
from model to model
2
4
7
6
10
11
14
17
15
18
9
12
13
XX
3
5
19
20
16
1
8
Read the Instructions for Use carefully before
using the appliance.
QUICK START GUIDE
ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm The acoustical alarm is activated and the Alarm Indicator blinks. The door has remained open for more than 2 minutes Close the door or press the Stop Alarm to mute the acoustical alarm.
Malfunction The letter “F” blinks on the display (°C) Product malfunction. Contact the After-sales Service
Printed in Italy 04/19 - Whirlpool
® Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.whirlpool.eu
POWER ON (EXTERNAL LED) indicator
An external green LED showing that the appliance is switched ON.
It automatically turns off when opening the door.
ALARM (EXTERNAL LED) indicator
This red LED can blink to show the occurrence of an alarm or a failure even when the
door is closed. Please open the door and check on the internal Control Panel which
alarm/failure is occurring.
TEMPERATURE
DISPLAY
ON/STANDBY button
To put the product in Stand-by, press
and hold the button for 3 seconds.
All the icons turn off except On/
Standby indicator . To reactivate
the appliance press once (briefly) this
button. (see the Instructions for Use).
TEMPERATURE button
Press the Temperature button to change
the temperature: the value changes cyclically
between 8°C ad 2°C.
Note: Displayed set points correspond to the
average temperature throughout the whole
refrigerator.
FAST COOL button
Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator
compartment. The use of this function is recommended when placing a very high quantity of food
in the refrigerator compartment. Press the Fast Cool button to activate Fast Cool function.
When activated, the Fast Cool indicator turns on. The function is automatically disabled after
6 hours, or can be manually disabled by pressing Fast Cool button again.
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
VACATION button
This function can be activated to reduce the energy
consumption of the appliance during a prolonged
period of time. Before activating the feature, all
perishable food should be removed from the
refrigeration compartment and make sure that the
door is closed properly, since the refrigerator will
maintain a suitable temperature to prevent the
formation of unpleasant odors (+12°C). To activate/
deactivate press the Vacation mode button for 3
seconds. When the function is enabled, the related
symbol will light up and the temperature of the
refrigerator compartment will be set to a higher
setpoint (the temperature display will show the
new temperature setpoint of +12°C). Changing the
temperature setpoint will automatically deactivate the
function.
FAN
The Fan improves temperature distribution inside the
product, allowing better preservation of stored food.
By default, the fan is switched on. To switch off the
FAN press and hold Vacation and Stop Alarm
buttons at the same time for 3 seconds until an
audible signal sounds and 6th Sense Fresh Control
icon will turn off as confirmation that the fan has
been switched off. repeat To switched on the FAN
the same procedure. As a confirmation audible signal
sounds and the icon turns on.
FAST COOL indicator ALARM indicator (see the below Alarms Table)
ON/STANDBY indicator VACATION indicator
6th SENSE FRESH CONTROL
This function automatically works to ensure the
optimal conditions to preserve the stored food. To
deactivate the “6th Sense Fresh Control”, press and
hold Vacation and Stop Alarm buttons at the
same time for 3 seconds until an audible signal
sounds and 6th Sense Fresh Control icon turns off
as confirmation that the feature has been deactivated.
To reactivate this function repeat the same procedure.
Note: Deactivation of the function switch-off the FAN
in the fridge.
400011362684
ES DAFRGB ELFI PL SVNO AR


Produktspezifikationen

Marke: Whirlpool
Kategorie: Kühlschrank
Modell: SW8 AM2Y WR 2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool SW8 AM2Y WR 2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kühlschrank Whirlpool

Bedienungsanleitung Kühlschrank

Neueste Bedienungsanleitung für -Kategorien-