Whirlpool Supreme Care 8014 Bedienungsanleitung

Whirlpool Waschmaschine Supreme Care 8014

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool Supreme Care 8014 (20 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/20
EN
1
DAILY REFERENCE
GUIDE
WWW
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs. whirlpool. eu and following
the instructions on the back of this booklet.
Before using the appliance carefully read the
Health and Safety guide.
Before using the machine, it is imperative that the
transport bolts are removed.
For more detailed instructions on how to remove
them, see the Installation Guide.
PRODUCT DESCRIPTION
CONTROL PANEL
APPLIANCE
1. On/Off button
(Reset/Drain if pressed and
held down)
2. Programme button
3. Colours 15° button
4. Fresh Care button
5. Dosing Aid button
6. Knob (Turn to select/
Press to confirm)
7. Start delay button
8. Temperature button
9. Spin Speed button
10. Options button
(Key lock if pressed and
held down)
11. Start / Pause button
12. Display
13. Programmes area
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water filter/emergency
drain hose (if available) -
behind plinth -
7. Plinth (removable)
8. Adjustable feet (4)
MAX
30’
40°
60°
1. 7.2.
13. 12.
6. 8.
4.
10.
1.
3.
2.
5.
7.
6.
8.
4.
2
1. Main wash compartment
• Detergent for the main wash
• Stain remover
• Water softener
2. Prewash compartment
• Detergent for the prewash.
3. Softener compartment
• Fabric softener
• Liquid starch
Pour in softener or starch solution only up to
the “max” mark.
4. Release button
(Press to remove the detergent dispenser for
cleaning).
DETERGENT DISPENSER
Detergent recommendations for various types of laundry
White robust laundry (cold-95°C) Heavy duty detergents
White delicate laundry (cold-40°C) Mild detergents containing whitener and/or optical brighteners
Light/pastel colours (cold-60°C) Detergents containing whitener and/or optical brighteners
Intensive colours Colour detergents without whitener/optical brighteners(cold-60°C)
Black/dark colours Special detergents for black/dark laundry(cold-60°C)
See the section on DAILY USE for information on how to select
and start a programme.
FIRST CYCLE
When you plug in the washing machine, it will switch on
automatically.
To remove any residues from the manufacturing process:
• Select the “Cotton” programme at a temperature of 95°C.
• Add a small amount of heavy duty detergent to
the main wash compartment of the detergent
dispenser (maximum 1/3 of the quantity
recommended by the detergent manufacturer for lightly
soiled laundry).
• Start the programme without adding any laundry.
FIRST TIME USE
DAILY USE
See the Use and Care Guide for more details on functions /
see the last page for information on how to obtain the Use and
Care Guide
1. LOAD LAUNDRY
• Prepare your laundry according to the
recommendations in the “HINTS AND TIPS”
section.
Make sure that pockets are empty, fasteners
closed and ribbons tied together.
• Open the door and load the laundry. Observe the
maximum load sizes given in the separate programme
chart.
2. CLOSE THE DOOR
• Make sure that no laundry gets stuck
between door glass and the rubber seal.
• Close the door so that you can hear it
click shut.
3. OPEN THE WATER TAP
4. SWITCH ON THE WASHING MACHINE
• Press the “On/O” button until the programme
button lights up. An animation appears on the
control panel and the appliance plays a sound.
The washing machine is then ready for operation.
5. SET THE DESIRED PROGRAMME
GUIDED MODE
—
the button light will guide you through
setting your programme in the following order: Selection
of programme/temperature/spin speed/options. As soon
as you confirm a selection by pressing the knob, the
button light jumps to the next step.
• Select programme:
Make sure that the programme button lights up.
EN
3
Turn the knob to select the desired programme.
The indicator next to the selected programme lights up.
Confirm the desired programme by pressing the knob.
• Change temperature, if required
If you want to change the temperature indicated on
the display, make sure that the Temperature button
lights up.
Turn the knob to select the desired temperature, then
press the knob to confirm.
• Change spin speed, if required
If you want to change the spin speed indicated on
the display, make sure that the Spin button lights up.
Turn the knob to select the desired spin speed, or
Rinse hold, then press the knob to confirm.
Refer to OPTIONS, FUNCTIONS AND INDICATORS for more
information.
• Select options, if required
If you want to select additional options, make sure
that the Options button lights up. The options which
are selectable for your programme are indicated by the
arrows which are lit up .
Turn the knob to select the desired options. The symbol for
the selected option will flash. Press the knob to confirm.
Some options/functions can be selected by pressing the
button directly:
Refer to the OPTIONS, FUNCTIONS AND INDICATORS
section for more information.
INDIVIDUAL MODE
After you have switched on the washing machine, you are
not forced to follow the GUIDED MODE.
The order in which you choose to set your programme is
up to you.
To make a setting, first press the relevant button, then turn
the knob to select, and finally press the knob to confirm.
The range of temperatures, spin speeds and options
depend on the programme selected. It is therefore
recommended that you start by selecting the programme.
6. ADD DETERGENT
• If you are using the Dosing Aid function, pull not
out the detergent dispenser and add detergent
(and additives/softener) now; observe the dosing
recommendations on the detergent pack.
If you have selected PREWASH or START DELAY, observe
the recommendations in the OPTIONS, FUNCTIONS AND
INDICATORS section. Then carefully close the detergent
dispenser.
• If you are using the “Dosing Aid” function, add
detergent later, after you have started the programme.
Refer to the OPTIONS, FUNCTIONS AND INDICATORS
section for more information.
• After having added detergent/additives, do not open the
detergent dispenser to avoid any overflow.
7. START PROGRAMME
• Press and hold “Start/Pause” until the button lights
up and stays on; the programme will start.
• If you have selected “Dosing Aid”, the washing
machine indicates the recommended detergent amount
for your laundry load after the programme starts.
Follow the instructions as indicated in the OPTIONS,
FUNCTIONS AND INDICATORS/Dosing Aid section.
8. CHANGE THE SETTINGS OF A PROGRAMME
WHICH IS RUNNING, IF REQUIRED
You can still change the settings while a programme is
running.
The changes will be applied, provided the respective
programme phase has not yet finished.
• Press the relevant button (for example the “Spin speed”
button to change the spin speed). The selected value will
flash for a few seconds.
• While it is flashing, you can adjust the setting by turning
the knob. If the value stops flashing before you have
adjusted it, press the button again.
• Press the knob to confirm the new setting. If you do not
confirm it, the new setting will be confirmed
automatically: It will stop flashing.
The programme will continue automatically.
To change the settings of a programme which is running,
you can also:
• Press “Start/Pause” to pause the programme which is
running
• Change the settings as desired.
• Press “Start/Pause” again to continue the programme.
9. PAUSE A PROGRAMME WHICH IS RUNNING
AND OPEN THE DOOR, IF REQUIRED
• Press and hold “Start/Pause” to pause a
programme which is running.
• Provided the water level and/or temperature is/
are not too high, the door open indicator lights
up. You can open the door, for example to add/
remove laundry.
• Press “Start/Pause” to continue the programme.
10. RESET A PROGRAMME WHICH IS RUNNING,
IF REQUIRED
• Press and hold the “On/O” button until “rES”
appears on the display.
The water drains, the programme ends and the door
unlocks.
11. SWITCH OFF THE WASHING MACHINE
AFTER THE PROGRAMME HAS ENDED
• “ ” will appear on the display and the door open End
indicator will light up – you can remove your laundry.
• ” to switch off the washing machine. Press “On/O
The washing machine will switch off automatically
after about a quarter of an hour after the
programme ends, to save energy.
• Leave the door ajar so that the inside of the washing
machine can dry.

Produktspezifikationen

Marke: Whirlpool
Kategorie: Waschmaschine
Modell: Supreme Care 8014

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool Supreme Care 8014 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Waschmaschine Whirlpool

Whirlpool

Whirlpool WFW9250WR Bedienungsanleitung

10 Oktober 2024
Whirlpool

Whirlpool LA5430XP Bedienungsanleitung

8 Oktober 2024
Whirlpool

Whirlpool BI WDWG 961484 Bedienungsanleitung

7 Oktober 2024
Whirlpool

Whirlpool WFW862CHC Bedienungsanleitung

5 Oktober 2024
Whirlpool

Whirlpool WB10037 Bedienungsanleitung

4 Oktober 2024
Whirlpool

Whirlpool WFE1075BD Bedienungsanleitung

3 Oktober 2024
Whirlpool

Whirlpool LA5200XT Bedienungsanleitung

3 Oktober 2024
Whirlpool

Whirlpool SF FWG 81296WS Bedienungsanleitung

3 Oktober 2024
Whirlpool

Whirlpool LA5500XT Bedienungsanleitung

3 Oktober 2024
Whirlpool

Whirlpool WFW5720RW Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-

Candy

Candy CS 15102D3-80 Bedienungsanleitung

16 Oktober 2024
GE

GE GSD3715FAA Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WTIE148 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126R Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126B Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISE126 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISA105 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WISA106 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WIA107 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WDIE14106 Bedienungsanleitung

16 Oktober 2024