Whirlpool GY397LXUQ Bedienungsanleitung

Whirlpool Backöfen GY397LXUQ

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool GY397LXUQ (24 Seiten) in der Kategorie Backöfen. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
INSTALLATION INSTRUCTIONS
SLIDE-IN ELECTRIC RANGES
INSTRUCTIONS D’INSTALLATION DES CUISINIÈRES
ÉLECTRIQUES ENCASTRABLES
RANGE SAFETY
Table of Contents/Table des matières
RANGE SAFETY .............................................................................1
INSTALLATION REQUIREMENTS................................................2
Tools and Parts ............................................................................2
Location Requirements................................................................2
Electrical Requirements - U.S.A. Only.........................................4
Electrical Requirements - Canada Only.......................................5
Countertop Preparation ...............................................................5
INSTALLATION INSTRUCTIONS..................................................5
Unpack Range..............................................................................5
Adjust Leveling Legs....................................................................6
Install Anti-Tip Bracket.................................................................6
Electrical Connection - U.S.A. Only.............................................7
Verify Anti-Tip Bracket Is Installed and Engaged ......................12
Level Range................................................................................13
Complete Installation .................................................................13
Moving the Range......................................................................13
SÉCURITÉ DE LA CUISINIÈRE ...................................................14
EXIGENCES D'INSTALLATION...................................................15
Outillage et pièces......................................................................15
Exigences d'emplacement.........................................................15
Spécifications électriques ..........................................................17
Préparation du plan de travail ....................................................17
INSTRUCTIONS D'INSTALLATION.............................................17
Déballage de la cuisinière ..........................................................17
Réglage des pieds de nivellement .............................................18
Installation de la bride antibasculement ....................................18
Vérifier que la bride antibasculement est bien
installée et engagée....................................................................19
Réglage de l'aplomb de la cuisinière.........................................19
Achever l'installation ..................................................................20
Déplacement de la cuisinière.....................................................20
IMPORTANT:
Save for local electrical inspector's use.
IMPORTANT :
À conserver pour consultation par l'inspecteur local des installations électriques.
W10430949A
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
Check that all parts are included.
■ 3 - #10-32 hex nuts (attached to terminal block)
■ 3 - Terminal lugs
■ 2 or 3 - Oven racks (depending on your model)
■ 2 - #12 x 1⁵⁄₈" screws (for mounting anti-tip bracket)
■ Anti-tip bracket
Anti-tip bracket must be securely mounted to back wall or
floor. Thickness of floor may require longer screws to anchor
bracket to subfloor. Longer screws are available from your
local hardware store.
Parts needed
If using a power supply cord:
■ A UL listed power supply cord kit marked for use with ranges.
The cord should be rated at 250 volts minimum, 40 amps or
50 amps that is marked for use with nominal 1³⁄₈" (3.5 cm)
diameter connection opening and must end in ring terminals
or open-end spade terminals with upturned ends.
■ A UL listed strain relief.
Check local codes. Check existing electrical supply. See
“Electrical Requirements” section.
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■ It is the installer’s responsibility to comply with installation
clearances specified on the model/serial rating plate. The
model/serial rating plate is located on the side of the oven
frame behind the storage drawer or warming drawer panel.
■ The range should be located for convenient use in the
kitchen.
■ To eliminate the risk of burns or fire by reaching over heated
surface units, cabinet storage space located above the
surface units should be avoided. If cabinet storage is to be
provided, the risk can be reduced by installing a range hood
that projects horizontally a minimum of 5" (12.7 cm) beyond
the bottom of the cabinets.
■ Cabinet opening dimensions that are shown must be used.
Given dimensions are minimum clearances.
■ The floor anti-tip bracket must be installed. To install the anti-
tip bracket shipped with the range, see “Install Anti-Tip
Bracket” section.
■ Grounded electrical supply is required. See “Electrical
Requirements” section.
IMPORTANT: To avoid damage to your cabinets, check with your
builder or cabinet supplier to make sure that the materials used
will not discolor, delaminate or sustain other damage. This oven
has been designed in accordance with the requirements of UL
and CSA International and complies with the maximum allowable
wood cabinet temperatures of 194°F (90°C).
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation instructions.
Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
WARNING
Anti-Tip
Bracket
Range Foot
■ Tape measure
■ Level
■ Phillips screwdriver
■ Flat-blade screwdriver
■ Wrench or pliers
■ ³⁄₈" nut driver
■ Drill
■ ¹⁄₈" (3.2 mm) drill bit
3
Mobile Home - Additional Installation Requirements
The installation of this range must conform to the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280). When such standard is not
applicable, the Standard for Manufactured Home Installations,
ANSI A225.1/NFPA 501A or with local codes.
Mobile home installations require:
■ When this range is installed in a mobile home, it must be
secured to the floor during transit. Any method of securing
the range is adequate as long as it conforms to the standards
listed above.
■ Four-wire power supply cord or cable must be used in a
mobile home installation. The appliance wiring will need to be
revised. See “Electrical Connection” section.
Product Dimensions
*Range can be raised approximately 1" (2.5 cm) by adjusting
the leveling legs.
**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm)
countertop; front of oven door protrudes 2¹⁄₂" (6.4 cm) beyond
24" (61.0 cm) base cabinet.
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm)
countertop depth, 24" (61.0 cm) base cabinet depth and
36" (91.4 cm) countertop height.
IMPORTANT: If installing a range hood or microwave hood
combination above the range, follow the range hood or
microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
NOTE: 24" (61.0 cm) minimum when bottom of wood or metal
cabinet is covered by not less than ¹⁄₄" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an uncovered wood or metal cabinet.
A. 30³⁄₄" (78.1 cm)
B. 35³⁄₄" (90.8 cm) height to underside
of cooktop edge with leveling legs
screwed all the way in*
C. Model/serial number plate (located
behind the storage or warming
drawer on the side of the oven frame
D. 29⁷⁄₈" (75.9 cm)
E. 28⁵⁄₁₆" (71.9 cm) from
handle to standoff at back
of range**
F. 23³⁄₄" (60.3 cm)
countertop notch to rear
of cooktop
C
B*
A
D
E**
F
A. 13" (33.0 cm) upper cabinet
depth
B. 30" (76.2 cm) min. opening
width
C. For minimum clearance to the
top of the cooktop,
see NOTE.
D. 23¹⁄₄" (59.1 cm) opening
depth
E. 30" (76.2 cm) min. opening
width
F. Junction box - 5.5" (14.0 cm)
min. from either cabinet,
10" (25.4 cm) max. from floor
Outlet must be flush.
Nothing located in shaded
area can extend more than
2" (5.1 cm) from wall or range
will not slide all the way back.
G. Cabinet door or hinge should
not extend into cutout.
A
D
E
F
G
H
B
I
I
C

Produktspezifikationen

Marke: Whirlpool
Kategorie: Backöfen
Modell: GY397LXUQ

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool GY397LXUQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Backöfen Whirlpool

Whirlpool

Whirlpool AKZ 231 IX Bedienungsanleitung

25 Juni 2024
Whirlpool

Whirlpool AKZ 612 WH Bedienungsanleitung

10 Juni 2024
Whirlpool

Whirlpool AKP 3534 HIX AUS Bedienungsanleitung

28 Mai 2024
Whirlpool

Whirlpool GBS309PVS Bedienungsanleitung

15 Mai 2024
Whirlpool

Whirlpool W7 OM4 4S1 P Bedienungsanleitung

15 Mai 2024
Whirlpool

Whirlpool WOD51ES4EB Bedienungsanleitung

3 Mai 2024
Whirlpool

Whirlpool RBD245PRT Bedienungsanleitung

26 April 2024
Whirlpool

Whirlpool W7 OM4 4S1 P BSS Bedienungsanleitung

24 April 2024
Whirlpool

Whirlpool RBD245PRS Bedienungsanleitung

19 April 2024
Whirlpool

Whirlpool OMR58RR0X Bedienungsanleitung

15 April 2024

Bedienungsanleitung Backöfen

Neueste Bedienungsanleitung für -Kategorien-

Miele

Miele DGC 7885 XXL Bedienungsanleitung

21 August 2024
Leonard

Leonard LBN1412X Bedienungsanleitung

19 August 2024
BEKO

BEKO BIR14400WGCS Bedienungsanleitung

13 August 2024
Lofra

Lofra FFV6TEE Bedienungsanleitung

28 Juni 2024
Lofra

Lofra FRS99EE Bedienungsanleitung

28 Juni 2024
BORA

BORA X Bo Bedienungsanleitung

27 Juni 2024
Junker

Junker JH4306062 Bedienungsanleitung

27 Juni 2024
Junker

Junker JH1300061 Bedienungsanleitung

27 Juni 2024
Junker

Junker JH2306061 Bedienungsanleitung

27 Juni 2024
Lofra

Lofra FOVN66GE Bedienungsanleitung

27 Juni 2024