Whirlpool FT M22 9X2WSY EU Bedienungsanleitung

Whirlpool Wäschetrockner FT M22 9X2WSY EU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool FT M22 9X2WSY EU (51 Seiten) in der Kategorie Wäschetrockner. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/51

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.Before using the appliance carefully read the Safety Instructions.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having

closed it, press the button Start/Pause again to restart the

dryer.

PROGRAMS

Eco Cotton kg Max*

Standard cotton programme, suitable to dry normally wet

cotton laundry. Most ecient programme in terms of energy

consumption for drying cotton laundry. The values on the

Energy Label are based on this programme.

Mixte kg 4

This programme is ideal for drying cotton and synthetic

fabrics together.

Bed Linen Kg Max*

This programme is intended for drying cotton sheets.

Shirts kg 3

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

Sport kg 4

For drying sports garments made of synthetics or cotton.

Duvet

Programme intended to dry bulky garments, as single

duvet.

Jeans kg 3

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make

sure that the drain hose on the back of the dryer is xed

correctly, either to the dryer’s water tank, or to your

domestic sewage system.

The dryer should be installed in environment in a room

temperature range of 20°to 23°C for optimum

performance. But will function if the room is between 14

and 30°C. Before you use your dryer ensure that it has

been in a upright position for at least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying

cycle.Remember to clean your lters after each drying

cycle. (Refer to section Care & Maintanence).

1. Open the door and load garments. Always refer to

instructions on clothing labels and the max loads indicated

in the programme section. Empty pockets. Make sure

garments do not get caught between the door and/or the

door lter.

2. Close the door.

3. Press the button On/O.

4. Select the programme according to the laundry type.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button.

7. At the end of the drying cycle, a buzzer will beep. An

indicator on the control panel signals the end of the cycle.

Pull the load out immediately to prevent the formation of

creases on laundry

8. Turn the machine o by pressing the button On/O,

open the door and pull clothing out. If the machine is not

switched o manually, after about a quarter of an hour from

the cycle end, the appliance turns o automatically to save

energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease

Care system. For some hours, after the end of drying, the

drum rotates at regular intervals to prevent the formation of

creases. In case of power failure, it is necessary to press the

button Start/Pause to restart the cycle.

*MAX LOAD 9 Kg (Dry load)

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

CONTROL PANEL

1 ON/OFF button (Reset if long pressed)

2 Programme selection Knob

3 Start/Pause

Options Buttons*

4 Cycle End

5 High Heat

6 Anti Tangle (Mute if long pressed)

7 Dryness Level

8 Start Delay

9 Timed Drying

10 Rapid (Key Lock if long pressed)

11 Gentle

12 Fresh Care+ *Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness Level: Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry

Cycle phase: Drying - Cool Down - End of cycle

Empty Water tank - Clean Door lter: primary, secondary - Autoclean

Refer to Troubleshooting section: Failure: Call after sales service

DEMO

Demo Mode

7 8 9

3“

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators will

signal the incompatibility. If the option is available, the option

indicator will stay on. Some options may be kept in the memory

of the programme if selected in the previous drying.

Easy Ironing

This cycle allows to extend the bres of garments thus

making ironing and folding easier. Do not use in case of

garments that are still wet. Suitable for small loads of

cotton textiles or cotton blends.

Refresh

A short programme suitable for refreshing bres and

garments by means of fresh air. Do not use with garments

that are still wet. It can be used on with any load size but is

more eective with small loads. The cycle duration is about

20 minutes.

Rapid 30' kg 0,5

Ideal for drying cotton garments spun at high speed in

the washing machine.

Coloured kg Max*

Programme for gentle drying suitable for coloured

garments.

Silk kg 0,5

Gentle drying of silk garments.

Wool kg 1

Programme for drying wool clothing. It is advisable to

turn the garments inside out before drying. Leave to dry

naturally the heaviest edges that are still damp.

Delicates kg 2

For drying delicate laundry which needs gentle

treatment.

Synthetics kg 4

For drying laundry made of synthetic bres.

OPTIONS

After selecting the programme, the various options can

be set, if necessary.

Dryness Level

Press the related button several times to obtain a

dierent level of residual moisture on garments. An

indicator signals the level being selected.

Iron Dry: a very delicate ironing. Suitable for making

ironing of garments easier immediately after the end of the

cycle.

Hanger Dry: a level intended for delicate garments

ready to be hanged.

Cupboard Dry: the garments are ready to be folded and

put away.

Extra Dry: used for garments to be worn at the end of

the cycle.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying.

After having reached the max. settable time, a further

pressure of the button resets the option. An indicator on the

control panel signals the time being selected.

Start Delay

This option allows you to set the delay of the cycle start.

Press the corresponding button several times to obtain

the required delay. After having reached the max. settable

time, the option is reset by pressing the button again.

An indicator on the control panel signals the time being

selected. After having pressed the button Start/Pause, the

machine signals the remaining time for the cycle start. In

case of door opening, after closing, it is necessary to press

the button Start/Pause.

Rapid

Enables quicker drying.

Fresh Care+

If garments are left inside the drum after the end of

the cycle, they are subject to bacterial proliferation. This

option allows to prevent this proliferation by controlling the

temperature and the rotation of the drum. This treatment

has a max. duration of 6 hours after the end of the

programme set. This option remains in memory if selected

in the previous drying.

If this option is used together with the Start Delay, a crease

treatment (a periodic rotation of the drum) is added in the

Start Delay phase.

Key Lock

This option makes all machine controls inaccesible, except

the button On/O. When the machine is on: to activate the

option, keep the button pressed until the indicator goes

on. To disable the option, keep the button pressed until the

indicator goes o. This option remains in memory if selected

in the previous drying.

Cycle End

This option activates a prolonged buzzer at the end of

the cycle. Enable it if you are not sure to hear the normal

sound at the end of the cycle. This option remains in

memory if selected in the previous drying.

Mute

This option turns o all sounds of control panel. Only

warnings remain active.

to activate the option, keep the button pressed until the

indicator goes on.

to disable the option, keep the button pressed until the

indicator goes o.

High Heat

It improves the drying capacity. Option suitable for

drying tough garments, it is used with timed cycles.

Anti Tangle

This option has the drum movement modied to give

a tumbling action that reduces tangling and knotting of

your clothes. This option gives best results when used with

smaller loads.

Gentle

Enables a more gentle treatment of the laundry by

reducing the drying temperature.

The wool drying cycle of this machine

has been approved by The Woolmark

Company for the drying of wool gar-

ments labelled as “hand wash” provided

that the garments are dried according

to the instructions issued by the ma-

nufacturer of this machine. Follow the

garment care label for other laundry

instructions. . The Woolmark symbol is a Certi cation mark in

many countries.

M1768

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Quick guide

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a

sink or other suitable drain, then place it back. Do not use the

dryer without having inserted the container back in place.

Cleaning the primary door lter after each cycle (see

Fig. B).

After each cycle, pull the primary door lter out and clean

it by removing the lint from the lter surface under running

water or using a vacuum cleaner.

Cleaning the secondary door lter when the relevant

indicator turns on (see Fig. C).

Pull the secondary door lter out and clean it in all its parts by

washing it under running water or using a vacuum cleaner.

Do not use the dryer without having inserted all lters

back in place properly rst.

The lters are essential parts for drying. They are

intended to collect the lint formed during drying

process. In case of clogged lters, the air ow inside

the dryer would be seriously aected: the drying

times would be longer, the energy consumption would

increase and the dryer could be damaged. If these

procedures are not carried out properly, the dryer may

not start.

Autoclean

The maintenance of the bottom lter of this model is

automatic. The dryer carries out cleaning when the sensors

signal the need to do so. In this case, the machine goes

on working even when the drying cycle is completed. An

indicator on the control panel will signal the maintenance.

Do not switch the machine o during this phase.

PRODUCT DESCRIPTION

1. Water Tank

2. Air Intake

3. Door lter

B primary

C secondary

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x

the drain hose on the rear of the dryer again (see Installation

Guide).

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0,18 kg of the F gas R134a. GWP = 1430 (1 t CO2).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs MinutesKg kWh

Eco Cotton * 9 1.88 211

Eco Cotton 4.5 1.34 173

Synthetics 4 0.83 109

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most ecient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conguration)

A B C

Produktspezifikationen

Marke:	Whirlpool
Kategorie:	Wäschetrockner
Modell:	FT M22 9X2WSY EU

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool FT M22 9X2WSY EU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Wäschetrockner Whirlpool

Whirlpool FFT M11 8X3BY EE Bedienungsanleitung

15 Oktober 2024

Whirlpool 3RAWZ481E Bedienungsanleitung

14 Oktober 2024

Whirlpool DDLX 80116 Bedienungsanleitung

13 Oktober 2024

Whirlpool Green 850 Bedienungsanleitung

12 Oktober 2024

Whirlpool W6 D83WB EE Bedienungsanleitung

12 Oktober 2024

Whirlpool FFT M11 9X3BY BE Bedienungsanleitung

12 Oktober 2024

Whirlpool Boston C Bedienungsanleitung

9 Oktober 2024

Whirlpool FFT M11 9X2BXY BE Bedienungsanleitung

7 Oktober 2024

Whirlpool WGD5720RW Bedienungsanleitung

2 Oktober 2024

Whirlpool WGD5720RR Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Wäschetrockner

Neueste Bedienungsanleitung für -Kategorien-

GE Profile PFD95GSPTDS Bedienungsanleitung

16 Oktober 2024

Maytag MGD7100DC Maxima Bedienungsanleitung

16 Oktober 2024

Bosch WTA4000 Bedienungsanleitung

16 Oktober 2024

Bauknecht TRKP 7950 Bedienungsanleitung

16 Oktober 2024

Hoover DX C9DKG-80 Bedienungsanleitung

16 Oktober 2024

Teka THPD80 Bedienungsanleitung

16 Oktober 2024

BEKO B3T41242 Bedienungsanleitung

16 Oktober 2024

BEKO BM5T49243W Bedienungsanleitung

16 Oktober 2024

BEKO B3T67110 Bedienungsanleitung

16 Oktober 2024

BEKO BM3T48249W Bedienungsanleitung

16 Oktober 2024