Whirlpool BI WDWG 75148 EU Bedienungsanleitung

Whirlpool Waschmaschine BI WDWG 75148 EU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool BI WDWG 75148 EU (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Quick Guide

CONTROL PANEL

WASH CYCLE TABLE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed.

For more detailed instructions on how to remove them, see the Installation Guide.

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter

7. Adjustable feet (4)

DETERGENT DISPENSER

Compartment 1: Pre-wash detergent

(powder)

Compartment 2: Washing detergent

(powder or liquid)

Compartment 3: Additives (fabric softeners,

etc.)

The fabric softener must not exceed the “MAX”

level.

! Use powder detergent for white cotton

garments, for pre-washing, and for washing at

temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

Maximum load 7 kg

Power input in o mode 0,5 W / in left-on mode 8 W

Detergents and

additives

Recommended

detergent

Programme Available tem-

peratures

Max. spin

speed

(rpm)

Drying

Max. load

for wash

cycle (kg)

Max. load

for drying

cycle (kg)

Duration

(Minutes)

Prewash Main Softener

Powder Liquid

1 2 3

MIXED - 40°C 1000 4,5 4,5

The duration of the programme is shown on the display.

- -

COTTON 2 - 60°C 1400 7 5 - 

SYNTHETICS 3 - 60°C 1200 4,5 4,5 - 

RAPID 30’ - 30°C 800 - 3,5 - -  -

SPORT - 40°C 600 4 4 -  -

WASH & DRY 45’ 30°C 1400 1 1 -  -

WASH & DRY 90’ 30°C 1200 2 2 -  -

SPIN & DRAIN * - 1400 7 5 - - - - -

RINSE & SPIN - 1400 7 5 - -  - -

WHITE - 90°C 1400 7 5 (90°) 

ECO COTTON 1 - 60°C 1400 7 5 - 

WOOL - 40°C 800 2 2 -  -

DELICATES - 30°C 0 1 1 -  -

COLOURS 15° 15°C 1000 4,5 4,5 -  -

  Required dosage Optional dosage

1. On/O button

2. Programme selector

3. Start/Pause button

4. Temperature button

5. FreshCare+ button

6. Dry Only button / Lock button

7. Drying settings button

8. Display

9. Start delay button

10. Spin speed button

21 93

10 6

DISPLAY INDICATORS

Washing phase

Indicates washing phase of the cycle

Drying phase

FreshCare+ activated

Key lock activated

Drying only

Timer drying mode

Drying automatic levels

Start delay activated

Door locked

* Select the programme and set the spin speed to “ “ to empty only.0

The cycle duration indicated on the display or in the manual is an estimated time calculated for

standard conditions. The actual cycle time may vary in relation to a number of dierent factors,

such as inlet water temperature and pressure, ambient temperature, quantity of detergent, size

and type of load, load balancing and any additional optional functions selected.

6th Sense - the sensor technology adapts water, energy and programme duration to your

wash load.

For wash programmes with temperatures above 50°C, we recommend using powder

detergent rather than liquid, and following the directions given on the detergent package.

For all Test Institutes

1) Test programme in compliance with standard EN 50229 (Wash): select the “ ”

programme with a temperature of 60°C.

2) Long cotton programme: set the “ “ programme with a temperature of 40°C.

3) Synthetic program along: set the “ “ programme with a temperature of 40°C.

Test programme in compliance with standard EN 50229 (Drying): select the “ “ wash

programme and set the drying level to “ ”, for both loads. The rst drying cycle must be

carried out with the nominal load.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

Cotton

for washing normally to heavily soiled towels, underwear, table and bed

linen etc. in resilient cotton and linen.

Synthetics

for washing normally soiled garments made from synthetic bres (such as

polyester, polyacrylic, viscose etc.) or cotton/synthetic blends.

Rapid 30’

for washing lightly soiled garments quickly: this cycle lasts only 30 minutes,

saving time and energy. Maximum load 3,5 Kg.

Sport

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best

results, we recommend not exceeding the maximum load indicated in

the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and

adding the amount suitable for half-load.

Wash & Dry 45’

for washing and drying lightly soiled cotton and synthetic bre garments

quickly. This cycle washes and dries a laundry load of up to 1 Kg in just 45

minutes.

Wash & Dry 90’

for washing and drying cotton and synthetic bre garments quickly. This

cycle washes and dries a laundry load of up to 2 Kg in just 90 minutes.

Spin & Drain

spins the load then empties the water. For resilient garments.

Rinse & Spin

rinses and then spins. For resilient garments.

White

For washing normally to heavily soiled towels, underwear, table and bed linen,

etc in resilient cotton and linen. Only when the temperature is selected at 90°C

the cycle is provided with a prewash phase before main washing phase. In this

case it is recommended to add detergent both, in the prewash and main wash

section.

Eco Cotton

for washing normally soiled cotton garments. At 40°C and 60°C, this is the

standard cotton programme and the most ecient and terms of water and

energy consumption.

Wool

All wool garments can be washed using programme ‚“Wool“ even those

carryng the “hand-wash only “ label. For best results, use special detergents

and do not exceed max kg declaration of laundry.

Delicates

for washing particularly delicate garments. Preferably turn garments inside

out before washing.

Colours 15°

This cycle helps protect colours by washing in cold water (15°C) and uses

less energy to heat the water while still oering satisfactory wash results.

Suitable for lightly soiled, ustained garments. This cycle oers wash results

comparable to 40°c mixed at just 15°C

Door locked indicator

if the symbol is o the door is locked. To prevent any damage, wait

until the symbol turns on before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is lit, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before you use it for the rst time,

run a wash cycle with detergent and no laundry, using the wash cycle (60°).

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; the START/PAUSE indicator light will

ash slowly.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the Wash Cycle Table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments as described in “DETERGENT DISPENSER DRAWER”

section.

- Close the door.

- Use the WASH CYCLE selector knob to select the desired wash cycle: it

will be associated with a specic temperature and spin speed that can be

modied. The duration of the cycle will appear on the display.

- The machine automatically displays the default temperature and spin

speed values for the selected cycle, or the most recently used settings if

they are compatible with the selected cycle.

- Select the drying cycle if desired.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady and the door will lock ( symbol o).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash. If the symbol is lit, the door may be opened. To

start the wash cycle from the point at which it was interrupted, press the

START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns o to signal that the door cannot

be opened. While a wash cycle is running, the door remains locked. To

open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle; the

indicator light will ash. If the symbol is lit, the door may be opened.

Press the START/PAUSE button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash), then

select the desired cycle and press the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

END OF THE CYCLE

This will be indicated by the word “END” on the display; when the

symbol switches on, the door may be opened. Open the door, unload the

laundry and switch o the machine. If you do not press “ON/OFF”

button, the washing machine will switch o automatically after about a

half of an hour. Close the water tap, open the door and unload the

washing machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set, the

incompatibility will be signalled by a buzzer and the corresponding

indicator light will ash.

! If the selected option is incompatible with another previously set

option, only the most recent selection will remain active.

Freshcare+

If associated with wash cycles, this option increases their performances by

generating steam to block proliferation of the main sources of unpleasant

odours inside the appliance (exclusively for the wash). After the steam

phase, the machine runs a delicate cycle with slow drum rotations. When

the Freshcare+ option is associated with drying cycles, it prevents

stubborn creases from stabilising on garments, thanks to slow drum

rotations.

The FreshCare+ cycle starts at the end of the wash or drying cycle and

continues for maximum 6 hours; it can be interrupted at any time by

pressing any button on the control panel, or by turning the knob. Wait

roughly 5 minutes before opening the door.

Start Delay

To set the selected programme to start at a later time, press the button to

set the desired delay time. The

symbol lights on the display when this

function is enabled. To cancel the delayed start, press the button again

until the value “0” is shown on the display.

Temperature

40°

60°

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the

40°

60°

button. The value will appear on the display.

Spin

Each wash cycle has a pre-dened spin speed. To modify the spin speed,

press the button. The value will appear on the display.

Setting the drying cycle

The rst time the button is pressed, the machine will automatically

select the maximum drying cycle which is compatible with the selected

wash cycle. Subsequent presses will decrease the drying level and then the

drying time, until the cycle is excluded completely (“OFF”).

Drying may be set as follows:

A- Based on the desired laundry dryness level:

Cupboard : suitable for laundry which can be put back in a cupboard

without being ironed.

Hanger : ideal for clothes which do not need to be dried fully.

Iron : suitable for clothes which will need ironing afterwards. the

remaining dampness softens creases, making them easier to remove.

B - Based on a set time period: between 210 and 30 minutes.

If your laundry load to be washed and dried is much greater than the

maximum stated load (see adjacent table of wash cycles), perform the

wash cycle, and when the cycle is complete, divide the garments into

groups and put some of them back in the drum. At this point, follow the

instructions provided for a “Drying only” cycle. Repeat this procedure for

the remainder of the load. Note: a cooling-down period is always added to

the end of each drying cycle.

Drying only

Press button to perform the drying-only cycle. After selecting the

desired cycle (compatible with the type of garments), press button to

exclude the washing phase and start the drying phase at the maximum

level for the selected cycle. The drying level or time may be set and

changed by pressing the drying button .

CHILD LOCK

to lock the control panel, press and hold the button “ ” for

approximately 3 seconds. the symbol lights on the display to indicate

that the control panel is locked (with the exception of the button). This

prevents unintentional changes to programmes, especially with children

near the machine.

If any attempt is made to use the control panel, the symbol ashes on

the display.

To unlock the control panel, press and hold the button “ ” for

approximately 3 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash

new coloured garments separately). Delicates (small garments – such as

nylon stockings – and items with hooks – such as bras: insert them in a

fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washing machine and

the drum. Check all buttons.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washing machine

o and disconnect it from the mains power. Do not use ammable liquids to

clean the washing machine.

Disconnect the water and power supplies

Close the water tap after every wash. This will limit wear on the hydraulic

system inside the washing machine and help to prevent leaks.

Unplug the washing machine when cleaning it and during all

maintenance work.

Clean the washing machine

The outer parts and rubber components of the appliance can be cleaned

using a soft cloth soaked in lukewarm soapy water. Do not use solvents or

abrasives.

Clean the detergent dispenser drawer

Wash it under running water; this operation should be repeated

frequently.

Care for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant

odours from forming.

Clean the pump

The washing machine is tted with a auto-cleaning pump that does not

require any maintenance. Small items (such as coins or buttons) may

sometimes fall into the protective pre-chamber situated at the base of the

pump.

! Make sure the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

2. clean the inside thoroughly;

3. screw the cover back on;

Check the water inlet hose

Check the water inlet hose at least once a year. If it is cracked or broken, it

must be replaced: during wash cycles, the high pressure of the water

could suddenly split the hose open.

! Never use hoses that have already been used.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations before every spin and

to distribute the load in a uniform manner, the drum rotates continuously

at a speed which is slightly greater than the washing rotation speed. If,

after several attempts, the load is not balanced correctly, the machine

spins at a reduced spin speed. If the load is excessively unbalanced, the

washing machine performs the distribution process instead of spinning. To

encourage improved load distribution and balance, we recommend small

and large garments are mixed in the load.

TRANSPORT AND HANDLING

Do not lift the washing machine by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Health & Safety and Installation Guides”.

Produktspezifikationen

Marke:	Whirlpool
Kategorie:	Waschmaschine
Modell:	BI WDWG 75148 EU
Breite:	595 mm
Tiefe:	540 mm
Gewicht:	65000 g
Produktfarbe:	Weiß
Steuerung:	Buttons, Rotary
Höhe:	815 mm
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 Hz
Eingebautes Display:	Ja
Verpackungsbreite:	645 mm
Verpackungstiefe:	595 mm
Verpackungshöhe:	890 mm
Paketgewicht:	67000 g
Geräteplatzierung:	Integriert
Kabellänge:	1.7 m
Energieeffizienzskala:	A bis G
Trockenprogramme:	Wool, Mix, Sport, Delicate/silk, Eco, Cotton, Synthetics, Iron dry, Cupboard dry
Waschprogramme:	Cotton, Eco, Wool, Mix, Quick, Sport, Synthetics, White, Delicate/silk
Maximale Schleuderdrehzahl:	1400 RPM
Nennkapazität (Waschen & Trocknen):	5 kg
Nennkapazität (Waschen):	7 kg
Startzeitvorwahl:	Ja
Anpassbare Rotationsgeschwindigkeit:	Ja
Luftschallemission (Schleudern):	73 dB
Luftschallemmission (Waschen):	46 dB
Luftschallemmission (Trocknen):	61 dB
Zyklusdauer (Waschen & Trocknen):	695 min
Energieeffizienzklasse (alt):	B
Jährlicher Energieverbrauch Waschen:	202 kWh
Verstellbare Füße:	Ja
Ladetyp:	Frontlader
Anschlusswert:	1850 W
Stromstärke:	10 A
Wasserverbrauch pro Zyklus (Waschen & Trocknen):	82 l
Energieverbrauch Reinigung:	1.01 kWh
Wasserverbrauch pro Zyklus (Waschen):	46 l
Energieverbrauch Waschen und Trocknen:	5.67 kWh
Türanschlag:	Links
Einschalteverzögerung (max.):	24 h
Kindersicherung:	Ja
Jährlicher Wasserverbrauch Waschen:	10000 l
Waschwirkungsklasse:	A
Rückstandsfeuchtigkeit:	53 %
Ladungsausgleichsystem:	Ja
Benutzerdefinierte Panel-Bereitschaft:	Ja
Restzeitanzeige:	Ja
Einbauraum Breite:	600 mm
Einbauraum Tiefe:	570 mm
Einbauraum Höhe:	820 mm
Wasserkapazität:	kalt
Sichtfenster:	Ja
Türverkleidung enthalten:	Nein
Kleidungshinzugabe (Pausen-) Funktion:	Ja
Spül-Plus-Funktion:	Ja
Trommelvolumen:	58 l
Zykluszeit (Schnellwaschprogramm):	30 min
Jährlicher Energieverbrauch (Waschen & Trocknen):	1134 kWh
Jährlicher Wasserverbrauch (Waschen & Trocknen):	16400 l