Whirlpool AKP745IX Bedienungsanleitung

Whirlpool Ofen AKP745IX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Whirlpool AKP745IX (12 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

1EN

IMPORTANT SAFETY INSTRUCTIONS

DANGER

WARNING

YOUR SAFET Y AND THAT OF OTHERS IS VERY IMPORTANT

This manual and the appliance itself provide important safety warnings, to be read and observed at all times.

This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others.

All safety warnings are preceded by the danger symbol and the following terms:

Indicates a hazardous situation which, if not avoided, will cause serious injury.

Indicates a hazardous situation which, if not avoided, could cause serious injury.

All safety warnings give specic details of the potential risk present and indicate how to

reduce risk of injury, damage and electric shock resulting from improper use of the appliance.

Carefully observe the following instructions:

- Use protective gloves to perform all unpacking and installation operations.

- The appliance must be disconnected from the power supply before carrying out any instal-

lation work.

- Installation and maintenance must be carried out by a qualied technician, in compliance

with the manufacturer’s instructions and local safety regulations. Do not repair or replace

any part of the appliance unless specically stated in the user manual.

- Power cable replacement must be carried out by a qualied electrician. Contact an authori-

zed service centre.

- Regulations require that the appliance is earthed.

- The power cable must be long enough for connecting the appliance, once tted in its hou-

sing, to the main power supply.

- For installation to comply with current safety regulations, an allpole disconnect switch

with minimum contact gap of 3 mm must be utilized.

- Do not use multiple plug adaptors if the oven is tted with a plug.

- Do not use extension leads.

- Do not pull the power supply cable.

- The electrical components must not be accessible to the user after installation.

- If the surface of the induction plate is cracked, do not use it and switch o the appliance to

avoid the possibility of electric shock (only for models with induction function).

- Do not touch the appliance with any wet part of the body and do not operate it when

barefoot.

- This appliance is designed solely for use as a domestic appliance for cooking food. No other

type of use is permitted (e.g.: heating rooms). The Manufacturer declines all responsibility

for inappropriate use or incorrect setting of the controls.

These instructions shall also be available on website: www.whirlpool.eu

2EN

- The appliance and its accessible parts become hot during use.

Care should be taken to avoid touching heating elements.

Very young (0-3 years) and young children (3-8 years) shall be kept away unless conti-

nuously supervised.

- Children from 8 years and above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge can use this appliance only if they are

supervised or have been given instructions on safe appliance use and if they understand

the hazards involved. Children shall not play with the appliance. Cleaning and user main-

tenance shall not be made by children without supervision.

- During and after use, do not touch the heating elements or interior surfaces of the ap-

pliance - risk of burns. Do not allow the appliance to come into contact with cloths or

other ammable materials until all the components have cooled down completely.

- At the end of cooking, exercise caution when opening the appliance door, letting the hot

air or steam exit gradually before accessing the oven. When the appliance door is shut,

hot air is vented from the aperture above the control panel. Do not obstruct the vent

apertures.

- Use oven gloves to remove pans and accessories, taking care not to touch the heating

elements.

- Do not place ammable materials in or near the appliance: a re may break out if the

appliance is inadvertently switched on.

- Do not heat or cook sealed jars or containers in the appliance.

The pressure that builds up inside might cause the jar to explode, damaging the appliance.

- Do not use containers made of synthetic materials.

- Overheated oils and fats catch re easily. Always remain vigilant when cooking foods rich

in fat and oil.

- Never leave the appliance unattended during food drying.

- If alcoholic beverages are used when cooking foods (e.g. rum, cognac, wine), remember that

alcohol evaporates at high temperatures. As a result, there is a risk that vapours released by

the alcohol may catch re upon coming into contact with the electrical heating element.

- Never use steam cleaning equipment.

- Do not touch the oven during the pyrolysis cycle. Keep children away from the oven

during the pyrolysis cycle. Excess spillage must be removed from the oven cavity before

cleaning cycle (only for ovens with Pyrolysis function).

- Only use the temperature probe recommended for this oven.

- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass

since they can scratch the surface, which may result in shattering of the glass.

3EN

INSTALLATION

SAFEGUARDING THE ENVIRONMENT

DECLARATION OF CONFORMITY

- Ensure that the appliance is switched o before replacing the lamp to avoid the possibility

of electric shock.

- Do not use aluminium foil to cover food in the cooking vessel (only for ovens with cooking

vessel supplied).

Scrapping of household appliances

- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal regulations. Before scrapping, cut o

the power supply cable.

- For further information on the treatment, recovery and recycling of household electrical appliances, contact your competent local authority, the collection service

for household waste or the store where you purchased the appliance.

After unpacking the oven, be sure that it has not been damaged during transport and that the oven door closes properly. In the event of problems, contact the dealer

or your nearest After-sales Service. To avoid any damage, only remove the oven from its polystyrene foam base at the time of installation.

PREPARING THE HOUSING UNIT

• Kitchen units in contact with the oven must be heat resistant (min 90°C).

• Carry out all cabinet cutting work before tting the oven in the housing and carefully remove all wood chips and sawdust.

• After installation, the bottom of the oven must no longer be accessible.

• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.

ELECTRICAL CONNECTION

Be sure the power voltage specied on the appliance dataplate is the same as the mains voltage. The dataplate is on the front edge of the oven (visible when the door

is open).

• Power cable replacement (type H05 RR-F 3 x 1.5 mm2) must be carried out by a qualied electrician. Contact an authorized service centre.

GENERAL RECOMMENDATIONS

Before use:

- Remove cardboard protection pieces, protective lm and adhesive labels from accessories.

- Remove the accessories from the oven and heat it at 200° for about an hour to eliminate the smell and fumes from the insulating materials and protective grease.

During use:

- Do not place heavy objects on the door as they could damage it.

- Do not cling to the door or hang anything from the handle.

- Do not cover the inside of the oven with aluminium foil.

- Do not pour water into the inside of a hot oven; this could damage the enamel coating.

- Do not drag pots or pans across the bottom of the oven as this could damage the enamel coating.

- Be sure that the electrical cables of other appliances do not touch hot parts of the oven or become trapped in the door.

- Do not expose the oven to atmospheric agents.

Disposal of packing material

The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must therefore be disposed of responsibly and

in full compliance with local authority regulations governing waste disposal.

Scrapping the product

- This appliance is marked in compliance with European Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE).

- By ensuring this product is disposed of correctly, you will help avoid potential negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product.

- The symbol on the product or on the accompanying documentation indicates that it should not be treated as domestic waste but must be taken to

an appropriate collection centre for the recycling of electrical and electronic equipment.

Energy saving tips

- Only pre-heat the oven if specied in the cooking table or your recipe.

- Use dark lacquered or enamelled baking moulds as they absorb heat far better.

- Switch the oven o 10/15 minutes before the set cooking time. Food requiring prolonged cooking will continue to cook even once the oven is switched o.

- This oven, which is intended to come into contact with foodstus, complies with European Regulation ( ) n.1935/2004 and has been designed, manu-

factured and sold in conformity with the safety requirements of the “Low Voltage” directive 2006/95/CE (which replaces 73/23/CEE and subsequent amendmen-

ts), the protection requirements of “EMC” 2004/108/CE.

- This appliance meets the eco design requirements of European regulations n. 65/2014 and n. 66/2014 in conformity to the European standard EN 60350-1.