Whirlpool ADP 4556/7 WH Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Whirlpool ADP 4556/7 WH (10 Seiten) in der Kategorie GeschirrspĆ¼ler. Dieser Bedienungsanleitung war fĆ¼r 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
11
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/CONNECTIONS
ELECTRICAL CONNECTION
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
12
BEFORE USING THE DISHWASHER/CONNECTIONS
1. Removing the packaging and controls:
After unpacking, make sure that the dishwasher is
undamaged and that the door closes correctly. If in
doubt, contact a qualified technician or your local
retailer.
ā€¢Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
ā€¢This dishwasher has been factory tested to ensure
it functions correctly.
Such testing may leave slight water marks that will
disappear with the first wash.
2. Water and electrical connections:
All water and electrical connections must be
carried out by a qualified technician in compliance
with the manufacturer's instructions (refer to the
enclosed installation booklet) and current local
safety regulations.
The appliance must only be used in the household
for the prescribed uses.
Do not use the dishwasher if it has been damaged
in transit. Consult your local retailer or our
After-Sales Service.
(Refer to the separate installation
instructions booklet)
3. Water inlet and drain:
ā€¢Observe any special regulations issued by your local
Water Board.
Water supply pressure: 0,03 - 1,0 MPa.
ā€¢Make sure the inlet and drain hoses are kink-free
and are not crushed.
ā€¢If the hose length is not sufficient, please contact
your local dealer or our After-Sales Service.
ā€¢The inlet hose must be securely clamped to the
water tap to prevent leaks.
ā€¢The inlet water temperature varies according to
the model installed. Inlet hose marked ā€œ25Ā°C Maxā€:
maximum temperature 25Ā°C.
All other models: maximum temperature 60Ā°C.
ā€¢When installing the appliance, make sure the drain
water discharges correctly (if necessary, remove
the wire gauze from the sink siphon).
ā€¢Fix the drain hose to the spigot with a clamp to
prevent it from coming off during operation.
For appliances with water-stop system only: If the
water connections are made correctly, the water-
stop system safeguards your home against damage
caused by flooding.
4. Electrical connection:
ā€¢Closely adhere to local Electricity Board
regulations.
ā€¢Voltage information is shown on the rating plate
mounted inside the door on the right hand side.
ā€¢The appliance must be earthed as prescribed by law.
ā€¢Do not use extension leads or multiple adapters.
ā€¢Before carrying out maintenance, disconnect the
mains plug.
ā€¢If necessary, the power cable may be replaced with
one the same obtained from our After-Sales
Service. The power cable must only be replaced by
a qualified technician.
Warning for models provided with LCD
display:
The mains plug must be positioned in an easily
accessible place.
ā€¢ For Austria: if the apparatus is series connected to
a fault current switch, this must be sensitive to the
pulsating current.
EC Declaration of conformity
This appliance has been designed, constructed and
distributed in compliance with the safety
requirements of EC Directives:
ā€¢73/23/EEC
ā€¢89/336/EEC
ā€¢93/68/EEC
Load capacity:
12 place settings.


Produktspezifikationen

Marke: Whirlpool
Kategorie: GeschirrspĆ¼ler
Modell: ADP 4556/7 WH

Brauchst du Hilfe?

Wenn Sie Hilfe mit Whirlpool ADP 4556/7 WH benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung GeschirrspĆ¼ler Whirlpool

Bedienungsanleitung GeschirrspĆ¼ler

Neueste Bedienungsanleitung fĆ¼r -Kategorien-