WestBend 41085 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für WestBend 41085 (40 Seiten) in der Kategorie Brotbackautomat. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
WEST BEND
Automatic Bread & Dough Maker
To prevent personal injury or property damage, read and follow the instructions and/or warnings in this care use instructional manual.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, property damage,
electrical shock and/or personal injury, including the following:
Read all instructions before using.
Do not touch hot surfaces. Use handles or knobs. Always use potholders or oven mitts to handle hot bread pan or hot bread.
Do not put hand inside oven chamber after bread pan is removed. Heating unit will still be hot.
To protect against electric shock, do not place cord, plug or appliance in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before
cleaning appliance.
Avoid contacting moving parts.
Do not operate appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any
manner.
The use of accessory attachments not recommended by The West Bend Company may result in fire, electrical shock or
personal injury.
Do not use outdoors.
Do not let cord hang over edge of table, counter or surface area, or touch hot surfaces.
Do not place appliance on or near a hot gas or electrical burner, or in a heated oven.
Do not use appliance for other than intended use.
To disconnect power, press stop button to turn control off, then remove plug from wall outlet. Never pull on the cord.
Extreme caution must be used when moving appliance during operation.
SAVE THESE INSTRUCTIONS
Your bread maker needs no special care other than cleaning. See warranty section in this booklet for service details. Do not
attempt to repair it yourself. For household use only.
An off odor from motor may be noted with first use, which is normal and will disappear with use.
ELECTRIC CORD STATEMENT
CAUTION: Your bread maker has a short cord as a safety precaution to prevent personal injury or property damage resulting
from pulling, tripping or becoming entangled with the cord. Do not allow children to be near or use this bread maker without
close adult supervision. If you must use a longer cord set or an extension cord when using the bread maker, the cord must be
arranged so it will not drape or hang over the edge of a counter-top, tabletop or surface area where it can be pulled on by children
or tripped over. To prevent electrical shock, personal injury or fire, the electrical rating of the extension cord you use must be the
same or more than the wattage of the bread maker (wattage is stamped on backside of bread maker).
IMPORTANT SAFETY INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Never use with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
Your West Bend® Automatic Bread & Dough Maker was designed for use with 120 volt, 60 hz electrical service ONLY. Use of
your bread and dough maker with a converter or transformer will destroy the electronic control and will void your warranty.
L4979 The West Bend Company
1
IMPORTANT INFORMATION ON PROTECTING ELECTRONIC CONTROL
To protect bread maker’s electronic control against possible damage caused by surges in electrical power line, we recommend using a
surge protector device, available in the electronic department of most discount/hardware stores. Simply plug surge protector into the
electrical outlet, then plug bread maker cord into receptacle of surge protector.
HELPFUL HINTS FOR SUCCESSFUL BREAD BAKING
To ensure great baking results in your West Bend Bread and Dough Maker, please take a few minutes to review the following tips and
read the basic instructions in the front section of this book. Please pay close attention on how to measure ingredients, as this is the
most important step in bread machine baking and the difference between success and failure.
IMPORTANT TIPS TO KEEP IN MIND WHEN MAKING BREAD ARE:
Make sure knead bar is in pan before adding ingredients. Simply match hole in bar with shape of shaft and slide on. You may
need to twist bar slightly to slide all the way down on shaft.
Always use fresh ingredients.
Measure ingredients accurately using correct measuring cups and spoons:
USE see-through glass or plastic measuring cups with graduated markings for liquids. Measure liquids at eye
level for accuracy.
USE set of solid, nesting type measuring cups for dry ingredients. ALWAYS SPOON DRY INGREDIENTS,
especially bread flour, into measuring cups, then level with a knife.
DO NOT SCOOP measuring cups into flour as this will cause dough to be too dry and result in short loaves.
USE set of graduated measuring spoons for smaller quantities of ingredients, measuring level, not rounded or
heaping.
Add ingredients to pan in this order: 1) all liquid ingredients first including butter or margarine, 2) all dry ingredients, EXCEPT
YEAST, putting salt in one corner of pan to keep away from yeast. 3) level dry ingredients in pan, 4) make a slight well in center
and add yeast.
Lock pan securely in machine. Simply hold pan with FRONT side facing you and angle back edge of pan into oval shaped
holder to lock hooks into notches. Then push front of pan down to lock in place.
Make bread and and crust color loaf size selections first, then turn machine on.
Feel free to check dough during knead cycle for any minor adjustment that may be needed. After 8-10 minutes of kneading,
open cover to look at and touch dough. (Opening cover at this time does not affect performance). Dough should be in a ball
between knead bars and feel a bit sticky. This is perfect and needs no adjustment. If dough is very sticky and clinging to sides or
in one corner of pan, it is too wet and needs flour. Add 1 tablespoon flour at a time until dough forms into a soft ball. If dough is
too dry and separates into 2 balls on knead bars, add lukewarm water, ½ tablespoon to 1 tablespoon at a time until dough becomes
soft and elastic and a bit sticky to the touch. When making any adjustment, always allow flour or water to be blended into dough
thoroughly, about 1 minute, before making any further adjustments.
2
“QUICK START” STEPS FOR MAKING FIRST LOAF OF BREAD
You are probably very anxious to start using your new bread maker without having the time to read this book from cover to cover.
Follow these “Quick Start” steps for making that first loaf of bread, whether using the mix included with your bread maker or one of
the recipes in this book. And while you are enjoying that first slice of freshly baked bread, sit back and read the book to ensure
successful baking results each and every time. It contains very important information on the proper use of your bread maker.
“QUICK START” STEPS FOR USING BREAD MIX INCLUDED WITH BREAD MAKER
Unlock pan from machine by lifting up on front edge. Remove pan. Wash pan and knead bars as recommended in “CLEAN BEFORE
USING” section. Make sure knead bars are positioned correctly on shafts in bottom of pan. See Diagram 8 on page 10.
1. Measurecups (10 ounces) lukewarm water in glass or plastic see-through measuring cup. Make sure water level is exactly at the
cup marking, at “EYE LEVEL”. Pour water into bread pan.
2. Open bag of dry ingredients and pour into pan on top of water. Level ingredients with knife, pushing some into corners of pan.
3. Make a well in center of dry ingredients; add yeast from packet included with mix.
4. Lock pan into bread maker with FRONT side facing you. See Diagram 10 on page 11. Close door. Plug bread maker into electrical
outlet.
5. The bread maker is already preprogrammed for making the bread mix. After the machine is plugged in, indicator arrows will point
to the basic/specialty bread setting, medium crust color and 1½ lb. loaf size. The process time of 3:30 (3 hours, 30 minutes) will
appear in display as this is the time needed to make the bread mix. Press start/stop button to turn machine on. Red on light will glow,
colon between hours and minutes will flash and time will count down in minutes so you always know how much time remains until
bread is done.
As machine advances, an alert will sound during the knead cycle as a reminder to add any ingredients called for in a recipe. Ignore this
alert when using the bread mix included with your machine as no additional ingredients need to be added.
When done, 0:00 will appear in display and audible alert will sound. Turn bread maker off by holding start/stop button down until red
ON light goes out, about 4 seconds. Open door. Using hot pads or oven mitts, carefully lift front edge of bread pan up to unlock then
lift pan out of machine. Shake bread out of pan. Cool on rack 15 to 30 minutes before slicing.
See “Clean After Each Use” section in this book for cleaning pan and knead bar.
“QUICK START” STEPS FOR MAKING A RECIPE IN THIS BOOK
Choose one of the many bread recipes included in this book and follow the basic steps that follow. Either a or 2 pound loaf of
bread can be made depending on the size loaf desired.
Unlock pan from machine by lifting up along front edge. Remove pan. Wash pan and knead bar as recommended in “Clean Before
Using section in this book.
1. Read MEASURING INGREDIENTS ACCURATELY” section in this booklet, as this is VERY IMPORTANT.
2. Add all liquid ingredients to pan first then butter or margarine followed by the dry ingredients, except the yeast. Level dry
ingredients pushing some into the corners of pan. Make a well in center of dry ingredients and add the recommended amount of yeast
for the type being used and loaf size.
3. Lock pan into bread maker with FRONT side facing you. See Diagram 10. Close door. Plug bread maker into electrical outlet.
4. Press bread select button until arrow points to recommended bread setting given in recipe. Next, press crust color button until arrow
points to desired crust color: or LIGHT, MEDIUM DARK. The press loaf size button until arrow points to the size loaf being
prepared, 1½ lb. or 2 lb. The process time will appear in display for the program selected. Press start/stop button to turn machine on.
Red on light will glow, colon between hours and minutes will flash and time will count down in minutes so you always know how
much time remains until bread is done.
As machine advances, an alert will sound during the knead cycle as a reminder to add any ingredients called for in a recipe. If no
additional ingredient(s) need to be added, simply ignore this alert.
When done, 0:00 will appear in display and audible alert will sound. Turn bread maker off by holding start/stop button down until red
ON light goes out, about 4 seconds. Open door. Using hot pads or oven mitts carefully lift front edge of pan up to unlock, then lift pan
out of machine. Shake bread out of pan. Cool on rack 15 to 30 minutes before slicing.
See “Clean After Each Use” section in this book for cleaning pan and knead bar.


Produktspezifikationen

Marke: WestBend
Kategorie: Brotbackautomat
Modell: 41085

Brauchst du Hilfe?

Wenn Sie Hilfe mit WestBend 41085 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Brotbackautomat WestBend

Bedienungsanleitung Brotbackautomat

Neueste Bedienungsanleitung für -Kategorien-