Wells RW1HD Bedienungsanleitung
Wells
Wärmeschublade
RW1HD
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Wells RW1HD (20 Seiten) in der Kategorie Wärmeschublade. Dieser Bedienungsanleitung war für 41 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/20
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
FREE STANDING
DRAWER WARMERS
with THERMOSTATIC
CONTROL
MODELS
RW1HD
RW2HD
RW3HD
RWN1
RWN2
RWN3
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
041
p/n Rev. F M041 01242M-303335 14
Model RW2HD
Model RWN2
M041 p/n 2M-303335 Owners Manual Free-Standing Drawer Warmer
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for a
period of one year from the date of original installation or 18
months from the date of shipment from our factory, whichever
comes rst, and is for the benet of the original purchaser
only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT
OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH WELLS MANUFACTURING PRODUCTS. This
warranty is void if it is determined that, upon inspection by an
authorized service agency, the equipment has been modied,
misused, misapplied, improperly installed, or damaged in
transit or by re, ood or act of God. It also does not apply
if the serial nameplate has been removed, or if service is
performed by unauthorized personnel. The prices charged
limitations in this warranty. Seller’s obligation under this
warranty is limited to the repair of defects without charge by
a Wells Manufacturing factory authorized service agency
or one of its sub-service agencies. This service will be
provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest authorized service agency,
transportation charges prepaid, for service. In addition to
restrictions contained in this warranty, specic limitations are
shown in the Service Policy and Procedure Guide. Wells
Manufacturing authorized service agencies are located in
principal cities. This warranty is valid in the United States and
Canada and void elsewhere. Please consult your classied
telephone directory, your food-service equipment dealer or
contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment
in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and le
“CONCEALED DAMAGE” claim with them. This
should be done within fteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase other
than specied on equipment nameplates are not covered
by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements and
wiring diagrams supplied with the equipment are not
covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and,
normal maintenance functions including adjustments
of thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing
and cleaning schedules, are customer responsibility.
Those miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-warranty
equipment. This parts warranty is limited only to
replacement of the defective part(s). Any use of non-
genuine Wells parts completely voids any warranty.
10. Installation, labor, and job check-outs are not considered
warranty and are thus not covered by this warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability
to perform service are not covered by warranty. This
includes institutional and correctional facilities.
xi
M041 p/n 2M-303335 Owners Manual Free-Standing Drawer Warmer
1
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 6
CLEANING INSTRUCTIONS 8
TROUBLESHOOTING SUGGESTIONS 9
MAINTENANCE INSTRUCTIONS 10
EXPLODED VIEW & PARTS LIST 11
WIRING DIAGRAM 13
PARTS & SERVICE 17
CUSTOMER SERVICE DATA 17
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
INTRODUCTION
SPECIFICATIONS
MODELS VOLTS
50/60 Hz 1ø WATTS AMPS POWER
CORD
RW1HD, RWN1 120 VAC 3.8450 W NEMA-5-15P
208/240 VAC 1.6/1.9338/450 W NEMA 6-15P
RW2HD, RWN2 120 VAC 900 W 7.5 NEMA-5-15P
208/240 VAC 676/900 W 3.3/3.8 NEMA 6-15P
RW3HD, RWN3 120 VAC 11.31350 W NEMA-5-15P
208/240 VAC 1014/1350 W 4.9/5.6 NEMA 6-15P
Produktspezifikationen
| Marke: | Wells |
| Kategorie: | Wärmeschublade |
| Modell: | RW1HD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Wells RW1HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wärmeschublade Wells
14 August 2024
13 August 2024
12 August 2024
9 August 2024
8 August 2024
7 August 2024
7 August 2024
7 August 2024
6 August 2024
16 Mai 2024
Bedienungsanleitung Wärmeschublade
- Wärmeschublade Panasonic
- Wärmeschublade Princess
- Wärmeschublade Bosch
- Wärmeschublade AEG
- Wärmeschublade Asko
- Wärmeschublade Siemens
- Wärmeschublade Bauknecht
- Wärmeschublade Concept
- Wärmeschublade Electrolux
- Wärmeschublade Gaggenau
- Wärmeschublade Gorenje
- Wärmeschublade Küppersbusch
- Wärmeschublade Miele
- Wärmeschublade Teka
- Wärmeschublade BEKO
- Wärmeschublade Blaupunkt
- Wärmeschublade Boretti
- Wärmeschublade Grundig
- Wärmeschublade KitchenAid
- Wärmeschublade Smeg
- Wärmeschublade Balay
- Wärmeschublade GE
- Wärmeschublade Haier
- Wärmeschublade Baumatic
- Wärmeschublade Bertazzoni
- Wärmeschublade Caple
- Wärmeschublade Neff
- Wärmeschublade Nordmende
- Wärmeschublade Progress
- Wärmeschublade ETNA
- Wärmeschublade V-ZUG
- Wärmeschublade Monogram
- Wärmeschublade Pelgrim
- Wärmeschublade Rosières
- Wärmeschublade Thermador
- Wärmeschublade Franke
- Wärmeschublade Saro
- Wärmeschublade Ufesa
- Wärmeschublade Silverline
- Wärmeschublade Novy
- Wärmeschublade De Dietrich
- Wärmeschublade Dacor
- Wärmeschublade Wolf
- Wärmeschublade Lamona
- Wärmeschublade Salter
- Wärmeschublade Viking
- Wärmeschublade Fisher & Paykel
- Wärmeschublade CDA
- Wärmeschublade Kenmore
- Wärmeschublade Hatco
- Wärmeschublade JennAir
- Wärmeschublade Fulgor Milano
- Wärmeschublade Von Reiter
- Wärmeschublade Vulcan
- Wärmeschublade APW Wyott
- Wärmeschublade DCS
- Wärmeschublade Porter & Charles
- Wärmeschublade Jenn-Air
- Wärmeschublade Alto-Schaam
- Wärmeschublade Twin Eagles
Neueste Bedienungsanleitung für -Kategorien-
9 Oktober 2024
30 September 2024
24 September 2024
21 September 2024
21 September 2024
18 September 2024
17 September 2024
16 September 2024
10 September 2024
6 September 2024