Vortex Viper HD 10 x 50 Bedienungsanleitung

Vortex Verrekijker Viper HD 10 x 50

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vortex Viper HD 10 x 50 (5 Seiten) in der Kategorie Verrekijker. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
2
Objective Lens
Ocular Lens
Twist-up Eyecup
Strap
Attachment
Tripod Adapter Socket
Center Focus
Locking
Diopter
4
Properly focus the binocular
For the best views, follow this two-step process to properly adjust
the center focus and diopter. Choose an object that is about 20
yards away from you and stay in the same spot until you have
adjusted the binocular for your eyes.
1. Adjust the center focus—start by closing your right eye or
covering the right objective lens with your hand. Focus your left
eye on the object and adjust the center
focus wheel until the image is in focus.
Leave the center focus in this position
as you adjust the diopter.
2. Adjust the diopter—start by closing
your left eye or covering the left
objective lens with your hand. Look
through your right eye, pull the diopter ring (found on the right
eyepiece) toward your eye and adjust the diopter until the object
is in focus. Then, push the diopter ring back down to lock your
settings. Make note of this diopter
setting in case you need to set it again.
From this point on, you will only need to
use the center focus wheel.

Produktspezifikationen

Marke: Vortex
Kategorie: Verrekijker
Modell: Viper HD 10 x 50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vortex Viper HD 10 x 50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Verrekijker Vortex

Bedienungsanleitung Verrekijker

Neueste Bedienungsanleitung für -Kategorien-