Vonyx VSA12 Bedienungsanleitung

Vonyx Lautsprecher VSA12

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vonyx VSA12 (16 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

VSA Series Bi- p 12 & 15 Am “ “

Ref. nr.: 170.364; 170.366

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

GEBRAUCHSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.1

ENGLISH

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to

benet fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions

to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the product is switched on for the rst

time, some smell may occur. This is normal and will

disappear after a while.

- The product contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the

product. This may cause electrical shock and

malfunction.

- Do not place the product near heat sources such as

radiators, etc. Do not place the product on a vibrating

surface. Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet,

always pull the plug, never the lead.

- Do not plug or unplug the product with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the product into a mains

outlet and DO NOT switch the unit on. Contact your

dealer. Do NOT connect the product to a rheostat or

dimmer.

- To avoid re and shock hazard, do not expose the

product to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10- fuse. 16A

- During a thunderstorm or if the product will not be used

for a longer period of time, unplug it from the mains. The

rule is: Unplug it from the mains when not in use.

- If the product has not been used for a longer period of

time, condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the

product in humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the produ on and o. This ct

shortens the life time.

- Keep the product out of the reach of children. Do not

leave the product unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- his product is with speaker inside which can cause If t

magnetic eld. Keep the product at least 60cm away

from computer or TV.

- If this product have a built-in lead- id rechargeable ac

battery. Please recharge the battery every 3 months if

you are not going to use the product for a long period of

time. Otherwise the battery may be permanently

damaged.

- If the battery is damaged please replace with same

specications battery. And dispose the damaged battery

environment friendly.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on

again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the oduct with a dry cloth. pr

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the

mains and/or other equipment. Unplug all leads and

cables prior to moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this product.

- Keep the original packing material so that you can

transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that p2-he should

read and adhere t o.

The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha

and their guarantee!

NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/ °41 F and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.

POWERSUPPLY

On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains

voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also

be directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate

electrical ground to avoid the risk of electrocution or re.

REAR PANEL

1. MIC 1 VOLUME LEVEL

Controls the microphone input volume

2. MIC 2 VOLUME LEVEL

Controls microphone input volume

3. LINE VOLUME LEVEL

Controls the line input volume

4. GUITAR

Two 6.3mm jack inputs for connecting guitars

5. RCA LINE IN

RCA connectors for line signal input

6. AUX IN

Auxiliary 3.5mm input connector

7. MIC 1 IN

This connector can either take a 6.3mm Jack

balanced or an XLR balanced cabled microphone

8. MIC 2 IN

This connector can either take a 6.3mm Jack

balanced or an XLR balanced cabled microphone

9. XLR LINE IN

XLR connector for line signal input

10. XLR LINE OUT

XLR connector for line signal output

11. MASTER VOLUME

This knob controls the master volume

12. TREBLE CONTROL

Adjust the high frequencies of the corresponding

channel

13. BASS CONTROL

Adjust the low frequencies of the corresponding

channel

14. AC IN AND FUSE HOLDER

Socket for plugging in the supplied power cord

(top). For instructions on how to change the fuse

(bottom), see “REPLACING THE FUSE”

15. POWER SWITCH

Turn the device ON or OFF

REPLACING THE FUSE

If the fuse is defective, replace the fuse with a fuse of the same type and value. Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuse holder on the rear panel with a tting screwdriver.

Step 2: Remove the old fuse from the fuse holder.

Step 3: Install the new fuse in the fuse holder.

Step 4: Replace the fuse holder in the housing.

Produktspezifikationen

Marke:	Vonyx
Kategorie:	Lautsprecher
Modell:	VSA12
Breite:	380 mm
Tiefe:	315 mm
Gewicht:	12800 g
Empfohlene Nutzung:	DJ
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	595 mm
Energiequelle:	AC
RMS-Leistung:	800 W
AC Eingangsspannung:	220 - 240 V
AC Eingangsfrequenz:	50 Hz
Menge pro Packung:	1 Stück(e)
Gehäusematerial:	Acrylnitril-Butadien-Styrol (ABS)
Audio Kanäle:	- Kanäle
Magnettyp:	Ferrit
Frequenzbereich:	40 - 20000 Hz
Mikrofon-Eingang:	Ja
Woofer:	Ja
Tieftönerdurchmesser (imperial):	12 "
Hochtöner:	Ja
Hochtönerdurchmesser (Imperial):	1 "
Lautsprecherplatzierung:	Standmontierbar
Verstärkerklasse:	A/B
6,35 mm (1/4-Zoll) Eingang:	1
XLR-Eingang:	Ja
Verstärker:	Eingebaut
Empfindlichkeit:	114 dB
Line-in:	Ja
Lautsprechertyp:	2-Wege