Vonyx CVB15 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vonyx CVB15 (16 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
CVB Series Active Speaker
Ref. nr.: 178.490; 178.492; 178.493; 178.495
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.1
2
ENGLISH
Congratulations to the purch e of this Von product. Please read this manual thoroughly prior to using the product in order to as yx
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all pre utions ca
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When th product is switched on for the rst e
time, some smell may occur. This is normal and will
disappear after a while.
- The product contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the product on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be car ul with the mains lead and do not damage it. A ef
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the product with wet han . ds
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the product into a mains
outlet and DO NOT switch the unit on. C tact your on
dealer. Do NOT connect the product to a rheostat or
dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed main outlet (220-s
240Vac/50Hz) protected by a 10- fuse. 16A
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used f a longer period of or
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the structions. in
- Do not repeatedly switch the produ on and o. This ct
shortens the life time.
- Keep the product out of the reach of children. Do not
leave the product unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- his product is with speaker inside which can cause If t
magnetic eld. Keep the product at least 60cm away
from computer or TV.
- If this p duct have a built-in lead-acid rechargeable ro
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace th same wi
specications battery. And dispose the damaged battery
environment friendly.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unp gging it from the lu
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains volta is 220-240Vac/50Hz. Check if power ge
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions.
This mark attrac the attention of the user to high voltages that are present inside the housing and that are of sucient ts
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and th p2-he should at
read and adhere to.
The product s been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate ha
and their guarantee!
NOTE: To make sure that the product will function normally, it must be ed in rooms with a temperature between 5°C/ °us 41 F and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are pical. The actual values can slightly change from one unit to the other. ty
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the pr t. This would also oduc
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
CONTROLS AND CONNECTIONS
1. Display
The display shows multiple forms of information, for example current
MODE, elapsed time, etc.
2. Button Cluster
M - ode Press to change mode.
Previous Track - Skip to previous track.
Play / Pause - Start/resume or pause play by pressing this button.
N - ext Skip to next track.
Repeat - Press to select repeat single track or repeat full folder.
Mute/Stand-by - Press to mute the device. Hold to enter stand-by mode.
3. SD Card Slot
Insert an SD card in this slot.
4. Port USB
USB entry port.
5. Mic Output Level Control
Adjust the volume of cropho channel.the mi ne
6. Mic Echo Level Control
Adjust the echo level.
7. Treble Control
H tone control. igh
8. Bass
L tone control.ow
9. Master Volume
Adjust the overall output level of the sound set.
10. XLR Microphone Input
XLR input for connecting a microphone.
11. Jack Microphone Input
6.3mm ¼” input jack for connecting a microphone.
12. Line Inputs
RCA input for connecting audio units with line level output
(e.g. mixer, CD player).
13. Line Outputs
RCA output for connecting another active speaker unit.
14. Power Switch
Switch to turn e devi O or OFF. th ce N
15. AC In And Fuse Holder
Socket for plugging in the supplied power cord.
CONNECTING WITH BT-DEVICE
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instruction that devi for instructions. s of ce
2. -function. Press the “MODE” button and activate BT
3. Select on your BT-device and make the -connection “ ”VONYX BT
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10meter without any barrier.


Produktspezifikationen

Marke: Vonyx
Kategorie: Lautsprecher
Modell: CVB15

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vonyx CVB15 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher Vonyx

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-