Vivo Y20s Bedienungsanleitung

Vivo Smartphone Y20s

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vivo Y20s (16 Seiten) in der Kategorie Smartphone. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

Y20s User Manual

1. Overview

1.1. Introduction to keys and widgets

1. ⑤Ambient light sensor & Proximity sensor: Automatically detect the intensity of the

ambient light, and adjust the brightness of the screen with the ambient light.

When making phone calls, this sensor automatically detects the distance between you and

your phone. If you're too close to your phone, it will switch off your screen to avoid

unintentional triggering of certain functions. The sensor is inactive in headset and handsfree

mode.

It is normal for the light at the top of the screen to flash briefly when dialing or calling. This

indicates the screen's infrared is working.

2. ⑥Volume button: You can adjust the volume using the volume button.

3. ①Front camera/⑧Rear camera: You can take photos and record videos.

4. ④Receiver: You can hear the caller through the receiver when on the phone.

5. ⑦Power button & Fingerprint sensor: Long press the Power button in power off mode

to turn on the mobile phone. Long press the button in boot mode to turn off the phone or

reboot the phone.

The button has the fingerprint recognition function, which can be used to unlock the phone

instead of the password.

Note

When the phone can not be used normally, simultaneously long press [Power button] and

[Volume button -] more than 10 seconds to force the device to restart .

6. ②Card tray: Install/Remove the cards.

7. : Insert the pin into the pin jack on the side body, and press it inwards to eject ③Pin port

the card tray.

8. ⑫

⑫

⑫⑫Microphone: Transfer sound when you make calls.

9. : Flashlight source. ⑨Rear flash

10. ⑪

⑪

⑪⑪Speaker: Playing sound.

11. ⑩USB port: You can connect your phone to other devices such as a charger or

computer using a data cable.

12. ⑬

⑬

⑬⑬Earphone jack: You can connect headphones to your phone using the headphone

jack.

1.2. Procedure for installing SIM / SD card

This phone supports hot swapping of Nano card (SIM1/SIM2)/Micro SD card. When the

phone is on, it can automatically recognize a Nano card (SIM1/SIM2)/Micro SD card when

you plug the card in.

This phone supports Nano card (SIM1/SIM2)/Micro SD.

1. Insert the pin into the SIM pin port on the side body, and press it inwards to eject the SIM

card tray; Remove the card tray.

2. Make the metal face of the Nano card (SIM1/SIM2) or Micro SD card face downward, with

the oblique angle corresponding to that of card tray. Put the Nano card (SIM1/SIM2) or

Micro SD card into the card slot according to the direction indicated by arrows of the

diagram.

3. Touch screen facing up, follow the direction of the arrow to install the tray (with Nano

card or Micro SD) into the phone.

Note

1. Due to different needs across countries, some phones may be single or dual SIM. The

instructions do not cover every difference between models.

2. The back cover is not removable, so as not to damage the machine.

3. Put SIM/SD card into card tray, then mount card tray into the phone. It is forbidden to

insert SIM/SD card to the phone directly.

4. You are suggested not to cut your SIM card by yourself. If the Nano card (SIM1/SIM2)

does not match, please go to the carrier to change a standard Nano card.

5. The phone uses a "Dual card dual standby single-pass" design, with means the two card

in the phone cannot be used in the same time for voice service nor data connection service.

When one of the two cards is in voice communication, the other card cannot be used to

answer any calls. If there is an incoming call to the other card, the caller may hear messages

such as "The number you called is not at service", "The subscriber you dialed can not be

connected for the moment, please redial later". When one of the two cards is in data

connection state, the other card can use the data connection service. For this reason the

above phone "Dual card dual standby single-pass" design caused, regardless of the

operator's network status. Single-channel is adopted because the phone uses single-chip

design, which can significantly improve the battery life and energy efficiency. The user is

encouraged to consult local operators to enable services like "Missed call reminder",

Produktspezifikationen

Marke:	Vivo
Kategorie:	Smartphone
Modell:	Y20s
Display-Typ:	IPS
Bildschirmauflösung:	1600 x 720 Pixel
Touchscreen:	Ja
Bildschirmdiagonale:	6.51 Zoll
FM-Radio:	Ja
RAM-Kapazität:	8 GB
Freisprecheinrichtung:	Ja
Beschleunigungsmesser:	Ja
Gyroskop:	Ja
SMS (Kurznachrichtendienst):	Ja
Unterstützte Audioformate:	AMR-NB, APE, FLAC, MIDI, MP2, MP3, Vorbis, WAV
E-Mail:	Ja
Elektronischer Kompass:	Ja
GPS:	Ja
BeiDou:	Ja
GLONASS:	Ja
Galileo:	Ja
USB Anschluss:	Ja
WLAN:	Ja
Bluetooth:	Ja
Bluetooth-Version:	5.0
Akku-/Batteriekapazität:	5000 mAh
Breite:	76.32 mm
Tiefe:	8.41 mm
Gewicht:	192.3 g
Mitgelieferte Kabel:	USB
Produktfarbe:	Blau
Schnellladung:	Ja
Höhe:	164.41 mm
Bildschirmform:	Flach
Unterstützte Videoformate:	3GP, AVI, FLV, MKV, MP4, TS
USB-Stecker:	Mikro-USB
USB-Version:	2.0
Autofokus:	Ja
Formfaktor:	Balken
Prozessor-Taktfrequenz:	- GHz
Prozessorfamilie:	Qualcomm Snapdragon
Prozessor:	460
Standort-Position:	Ja
Interne Speicherkapazität:	128 GB
Kompatible Speicherkarten:	MicroSD (TransFlash)
Plattform:	Android
Rückkamera-Typ:	Dreifach-Kamera
Auflösung Rückkamera (numerisch):	13 MP
Auflösung zweite Rückkamera (numerisch):	2 MP
Rückkamera Blendenzahl:	2.2
Zweite Rückkamera Blendenzahl:	2.4
Frontkamera-Typ:	Einzelne Kamera
Auflösung Frontkamera (numerisch):	8 MP
Frontkamera Blendenzahl:	1.8
Rückkamera-Blitz:	Ja
Blitz-Typ:	LED
Video-Auflösung:	- Pixel
Zeitraffer-Modus:	Ja
Sprechzeit (3G):	- h
Standby-Zeit (3G):	- h
Annäherungssensor:	Ja
Umgebungslichtsensor:	Ja
SIM-Kartensteckplätze:	Dual-SIM
Mobilfunknetzgenerierung:	4G
SIM-Kartentyp:	NanoSIM
3G-Standards:	WCDMA
4G-Standard:	LTE-TDD & LTE-FDD
Tethering (Modem-Modus):	Ja
Abonnement-Typ:	Kein Abonnement
Art des Touchscreens:	Kapazitiv
MMS (Multimedia-Nachrichtenübermittlung Service):	Ja
Name der Farbe:	Purist Blue
Fingerabdruckscanner:	Ja
Vibrationsalarm:	Ja
Dritte Rückfahrkamera-Auflösung (numerisch):	2 MP
Dritte Rückfahrkamera Blendenzahl:	2.4
Geolokalisation:	Ja
Betriebssystem-Gabel:	Funtouch OS 10.5
Display-Auflösung:	1600 x 720 Pixel