Vivanco UR 1200 Bedienungsanleitung

Vivanco Fernbedienung UR 1200

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vivanco UR 1200 (36 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/36

TITAN UNIVERSAL REMOTE CONTROLS UR 1200

(GB) Instructions ► 2

(D) Bedienungsanleitung ► 5

(F) Notice d’emploi ► 8

(E) Instrucciones para el uso ► 11

(I) Istruzioni per l’uso ► 15

(NL) Gebruiksaanwijzing ► 18

(PL) Instrukcja obsługi ► 21

(P) Manual de instruções ► 24

(S) Bruksanvisning ► 28

(RUS) Руководство по

эксплуатации ► 30

(CZ) Návod k obsluze ► 33

(GB) Instructions

Inserting the

batteries

Open the battery com-

partment on the under-

side of the remote..

Then insert 2 AAA bat-

teries. Make sure that

the polarity is correct:

the "+" and "-" mark-

ings on the batteries

and in the compart-

ment must match.

- To check functional-

ity, press the but-

ton. If everything is

correct the red lamp

flickers when the button is pressed.

Adapting to appliances

In order to control your appliances you must ad-

apt or set the remote control to them. There are

two ways of doing so:

Direct control code entry using the enclosed

list

Example: setting to control a Panasonic televi-

sion set:

1. The enclosed list

gives, for example,

the Panasonic Code

436.

- Please make sure you

have selected the cor-

rect list for television

sets (TV).

2. To prepare code

entry, keep the OK

button and the TV

button pressed simul-

taneously(!) until the

lamp (LED) lights

constantly.

3. Then enter the code

numbers as follows:

4. 1st number of code

(hundreds): Press the

VOLUME+ button- 4

times for the 4 of 36. 4

Press as often as the

number indicates.

(1=once, 2 = twice,

etc.)

5. 2nd number of code (tens): Press the

VOLUME- button 3 times for the 3 of 4 6.3

6. 3rd number of code (ones): Press the

CH/SKIPΔ 6 button 6 times for the of 43 .6

7. Finally, press the button again briefly. The OK

lamp ( goes out. LED)

- To enter a 0, do not press any button.

- If lamp flashes twice code was not accepted

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: , Helpline: +49 (0) 4102 231135hotline@vivanco.de 2

and code input can be started again.

8. Then test the control code setting by trying to

control (in this example) your television set. If

it does not work at all or not correctly try a dif-

ferent code from the list or code search (see

below).

9. To make the setting for a DVB (SAT, CBL), re-

ceiver or a cable box, press the SAT/DVB

(SAT, CBL) button instead of TV and enter a

DVB (SAT, CBL) code accordingly.

- You terminate the mode by pressing any

device button or by code input interruption of

more than 10 seconds.

Code search

If the brand of your appliance is not in the list or

none of the codes given fits, we recommend a

code search.

Manual code search

1. Switch on the appliance to be controlled. Pro-

gram is running.

2. To prepare code search, press the button OK

and the appliance button, e.g. TV, simultan-

eously until the lamp (LED) lights constantly.

3. Then point the remote control at the appli-

ance to be controlled.

4. Briefly press the ON/OFF button once.

The lamp (LED) blinks.

5. Press the ON/OFF button about any 1

second so often until the appliance, e.g. your

TV reacts by power off.

- You can invert search direction by pressing

the button and then again.OK

- If your appliance has switched itself off, you

must switch it back on again, e.g. on the appli-

ance or with the original remote control, to con-

tinue searching.

- When your appliance reacts you can also try

out other buttons without interrupting the

search. If some buttons do not work properly,

simply continue searching by pressing ON/OFF

again.

6. When your appli-

ance reacts cor-

rectly, press the ap-

pliance button, e.g.

TV for end of

searching and sav-

ing of found code.

The lamp (LED)

goes out.

- The last code

entered remains

stored. The search

stops after approx. 30

seconds of inactivity.

Automatic code

1. Switch on the appli-

ance to be con-

trolled. Program is

running.

2. To start the code

search, press the

OK button and the

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: , Helpline: +49 (0) 4102 231135hotline@vivanco.de 3

Produktspezifikationen

Marke:	Vivanco
Kategorie:	Fernbedienung
Modell:	UR 1200
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AAA
Anzahl unterstützter Akkus/Batterien:	2
Verbesserung des Videotexts:	Nein
Ein-/Ausschalter:	Ja
Akkus/Batterien enthalten:	Nein
Beleuchtete Tasten:	Nein
Cursortaste:	Ja