Vimar ELVOX 945B Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vimar ELVOX 945B (24 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
945B, 945B/I
Porter’s Switchboard
Installer guide
2
DESCRIPTION
Porter's switchboard in desk-top version with black thermoplastic housing. This switchboard can call up to 99999999 users
using a 20-key keypad which serves to enter user numbers, make calls, activate intercom or conference functions (excluding
the building complex), release the door lock and for F1-F2 functions and to cancel the operation currently in progress. The
switchboard can store up to 30 different calls (displayed by using the memory scroll button) and is provided with watch (with
time and date) and two wake up functions. Option to manage a printer (use switchboard Art. 945B/I with printer interface)
MANAGING THE DISPLAY (40X2):
The switchboard display is (in its typical operation state) divided in 5 main zones in order to allow an easy and immediate
distinction of all data displayed.
UPPER LINE
3 zones may be distinguished:
Left hand side: display of all outgoing messages, and also particular information signalling.
Centre: display of the number to be dialled (8 digits) or the respective message on its left hand side
Right hand side: display of the current time.
LOWER LINE
- Left hand side: display of all incoming messages (from internal units or from external lines), followed by respective number.
- Right hand side: display of a series of "icons" able to show in a graphic way a wide series of states/functions.
"ICON" DESCRIPTION
+ (box with an arrow, followed by a number): It shows that there are calls (or other commands) in the memory (5 =
number of queued calls)
(Telephone handset): It means the handset is lifted.
(Arrow toward the wire at the left hand side): It indicates intromission in the conversation line by the switchboard's operator.
(Key): It means there is a lock release or a function activation in progress.
(Bell in movement): It means there is a call in progress (ring). Is then being replaced by an "A" indicating a "Wait for the
answer" and then by a "C" indicating a "Conversation in progress" (NOTE: with hooked handset).
or (Telephone in movement): It means there is a connection with the telephone line.
(Lock): Indicates "locked keypad" by an external key.
(Int) (Ext): Indicates the switchboard state (Internal or External mode).
Exclusion of sound (by using R+3).
(Lock in movement): Indicates 'locked keypad'.
Moreover, the display switches its operation if there is any particular function.
QUICK GUIDE
- Parameter programming (R+4) + code
- Displaying the date-time-wake up (R+2), (or R+"8->8")
- Entering the code for keypad lock (R+1)
- Activation of accessory functions (KEY)
- Programming the events to store (R+ )
- Programming the events to print (Press again the push-button)
- Setting the time for wake up service 1 (Press again the push-button)
- Setting the time for wake up service 2 (Press again the push-button)
- Setting the time (Press again the push-button)
- Setting the date (Press again the push-button)
- Exclusion - Reactivation of audio sound R + 3
3
STORED CALLS
- Possibility of storing different types of "events": calls from interphones, activation of: different functions, door lock release,
calls from switchboard. The selection of the type of events to store is managed by interactive menu type display (see "OPE-
RATION OF MENU PROGRAMMING" ).
- Besides the type of message concerning the type of event and the calling number, the time of the event is stored.
- Maximum number of stored messages: 30 with circular queue (i.e. the latest 30 more recent events are stored).
- Storage of events on the watch backed up RAM (by means of a proper capacitor). In case of mains failure there is no loss
of stored data.
- The events may be sent to a printer simultaneously (option with interface type 945B/I).
- In case of events stored in the memory, a special flashing icon is activated (arrow toward the box ) on the display and
also the number of stored messages. As soon as a message is read it gets cancelled and the number decreases .
- A sound simultaneous with the event reception is generated (programmable).
INTERNAL WATCH WITH DATE AND TIME AND 2 WAKE UP SERVICES
It is always possible to display the present date and time. The internal watch is "backed up" (by means of a capacitor) in case
of mains failure (capacitor supply dwell: nearly 4 days). Two wake up services may be also programmed.
AUDIO EVENTS
Different types of sounds are forseen according to different type of events (call from riser, from external lines, wake up service
etc.). The sounds may be also programmed with musical melodies by means of a special software and an interface connec-
ted to a personal computer.
"SOFTWARE" LOCK KEY
The switchboard keypad may be locked by means of the "software key".
SIMPLIFIED MANAGEMENT OF THE "INTERNAL-EXTERNAL" MODE PUSH-BUTTON.
Now the "Internal-External" push-button (I/E) has only the function to switch from the internal to the external mode. In this new
version there is no keypad lock activation. At any time it is possible to recognize the switchboard state: a proper symbol on
the bottom on the right hand side of display (icon zone) indicates the mode ("I" for internal mode and "E" for external mode).
On external mode also the respective "EXTERNAL" mode LED switches on. NOTE: the state is memorized in EEPROM and is
kept stored even during the mains failure.
MANAGING THE PRINTER
- The printer is connected by means a special optional interface, built-up inside the same switchboard.
- Any printer provided with connected parallel circuit board may be installed (not any more a dedicated printer). It is the
internal software to manage the different models.
- A wide range of data may be selected (either on reception either on transmission).
CIRCUIT BOARD RE-PROGRAMMING "IN-CIRCUIT".
The circuit board may be easily programmed "in-circuit" by proper connector (above all useful for special versions).
POSSIBLE CONNECTION TOWARD A PC
By means of a computer equipped with a proper software and interface it is possible to download the data (events in
memory), to manage the configuration parameters, to manage the names in memory (optional), and to set various functions.
Morover, it is possible to modify the musical melodies, the direct event recording, and to make a partial switchboard selfdia-
gnose.
Produktspezifikationen
Marke: | Vimar |
Kategorie: | Schalten |
Modell: | ELVOX 945B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Vimar ELVOX 945B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten Vimar
21 August 2024
17 August 2024
16 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
15 August 2024
Bedienungsanleitung Schalten
- Schalten Asus
- Schalten Belkin
- Schalten Hama
- Schalten HP
- Schalten LogiLink
- Schalten Manhattan
- Schalten Nedis
- Schalten Philips
- Schalten SilverCrest
- Schalten Panasonic
- Schalten Brennenstuhl
- Schalten Clas Ohlson
- Schalten Cotech
- Schalten Profile
- Schalten ZyXEL
- Schalten Bosch
- Schalten Yamaha
- Schalten Powerfix
- Schalten CSL
- Schalten Eminent
- Schalten Linksys
- Schalten Netgear
- Schalten König
- Schalten PCE
- Schalten Renkforce
- Schalten Trotec
- Schalten Schneider
- Schalten Rex
- Schalten Kaiser
- Schalten Vivanco
- Schalten Abus
- Schalten Elro
- Schalten Smartwares
- Schalten Tesla
- Schalten Perel
- Schalten Nexa
- Schalten Tork
- Schalten GEV
- Schalten Goobay
- Schalten Lindy
- Schalten Tripp Lite
- Schalten Ansmann
- Schalten Mercusys
- Schalten Marmitek
- Schalten Honeywell
- Schalten TRENDnet
- Schalten TP-Link
- Schalten Kathrein
- Schalten Flamingo
- Schalten Alcatel
- Schalten Tiptel
- Schalten Black Box
- Schalten Alpine
- Schalten Techly
- Schalten Ebode
- Schalten Theben
- Schalten Vacmaster
- Schalten GAO
- Schalten Hager
- Schalten Behringer
- Schalten Omnitronic
- Schalten Monoprice
- Schalten Ecler
- Schalten Monacor
- Schalten Huawei
- Schalten JUNG
- Schalten Victron Energy
- Schalten Ei Electronics
- Schalten Edimax
- Schalten Totolink
- Schalten D-Link
- Schalten Sylvania
- Schalten Audiovox
- Schalten B-Tech
- Schalten QNAP
- Schalten SPC
- Schalten Speaka
- Schalten Digitus
- Schalten Sygonix
- Schalten DataVideo
- Schalten Lancom
- Schalten LevelOne
- Schalten Merten
- Schalten APC
- Schalten Eberle
- Schalten Cisco
- Schalten Delta Dore
- Schalten Grässlin
- Schalten Tenda
- Schalten CyberPower
- Schalten Boss
- Schalten IFM
- Schalten Intertechno
- Schalten Elation
- Schalten Ubiquiti Networks
- Schalten Kramer
- Schalten Aeon Labs
- Schalten Intellinet
- Schalten Eaton
- Schalten AV:link
- Schalten Hikvision
- Schalten Vemer
- Schalten PreSonus
- Schalten Planet
- Schalten EnGenius
- Schalten Finder
- Schalten Mikrotik
- Schalten Shimano
- Schalten Homematic IP
- Schalten Berker
- Schalten Dormakaba
- Schalten Emerson
- Schalten Generac
- Schalten Intermatic
- Schalten KlikaanKlikuit
- Schalten Mercury
- Schalten Paladin
- Schalten Provision ISR
- Schalten Robbe
- Schalten SEC24
- Schalten Steren
- Schalten Suevia
- Schalten AMX
- Schalten Triax
- Schalten WHALE
- Schalten Cudy
- Schalten Siig
- Schalten Electro Harmonix
- Schalten RGBlink
- Schalten Iogear
- Schalten StarTech.com
- Schalten Smart-AVI
- Schalten Dahua Technology
- Schalten PAC
- Schalten Gefen
- Schalten Avocent
- Schalten Legrand
- Schalten Atlantis Land
- Schalten CYP
- Schalten H-Tronic
- Schalten ATen
- Schalten Axing
- Schalten KanexPro
- Schalten SmartAVI
- Schalten Advantech
- Schalten Kraus & Naimer
- Schalten Chacon
- Schalten Juniper
- Schalten Fibaro
- Schalten Phoenix Contact
- Schalten Audac
- Schalten OSD Audio
- Schalten Wentronic
- Schalten SunBriteTV
- Schalten BZBGear
- Schalten Crestron
- Schalten Kemo
- Schalten ORNO
- Schalten Extron
- Schalten Atlona
- Schalten Equip
- Schalten Heitronic
- Schalten Hamlet
- Schalten STI
- Schalten Matrox
- Schalten Blustream
- Schalten Vivolink
- Schalten Mach Power
- Schalten Ernitec
- Schalten Cambium Networks
- Schalten ConnectPro
- Schalten Micro Connect
- Schalten Intelix
- Schalten ICasa
- Schalten Maclean Energy
- Schalten Cooking Performance Group
- Schalten Flic
- Schalten Liberty
- Schalten Noark
- Schalten 2USB
- Schalten KVM-TEC
- Schalten Setti+
- Schalten PureLink
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
12 Oktober 2024
11 Oktober 2024
8 Oktober 2024
8 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024