ViewSonic SD-A245 Bedienungsanleitung

ViewSonic Monitor SD-A245

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ViewSonic SD-A245 (76 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/76

SD-A245/CDS245

Quick Start Guide

Guide rapide de début

Guía de inicio rápido

Kurzanleitung

Быстро hаправляющий выступ cтарта

Hızlı Başlangıç Kılavuzu

Guia Rápido

Pika-aloitusopas

Compliance Information

Please read before proceeding

• Use only the batteries and power adapter provided by the manufacturer. The use of unauthorized accessories

may void your warranty.

• Do not store your device in temperatures higher than 50°C (122°F).

• The operating temperature for this device is from 0°C (32°F) to 35°C (95°F).

FCC Notice

The following statement applies to all products that have received FCC approval. Applicable products bear the

FCC logo, and/or an FCC ID in the format FCC ID: GSS-VS15197 on the product label.This device complies with

part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) This device must accept any interference received, including interference that may

cause undesired operation. This mobiledevice has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modications not expressly approved by the party responsible for compliance could void theuser’s

authority to operate the equipment.The antenna(s) used for this transmitter must not be colocated or operating in

conjunction with any otherantenna or transmitter.

The device was tested and complies to measurement standards and procedures specied in FCC OET Bulletin 65,

Supplement C

FCC SAR Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users

must follow the specic operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This

equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and

your body.

Canada Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

Caution: Exposure to Radio Frequency Radiation

To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be

maintained between the antenna of this device and all persons.

Pour se conformer aux exigences de conformité CNR 102 RF exposition, une distance de séparation d'au moins 20

cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC, R&TTE

Directive 1999/5/EC.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use

the return and collection systems according to local law.

If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg,

Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury, or more

than 0.002% Cadmium, or more than 0.004% Lead.

European Union Regulatory Conformance

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommendation of 12 July

1999 on the limitation of exposure of the general public to electromagnetic elds (0-300 GHz). This equipment

meets the following conformance standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.

We, hereby, declare that this Wi-Fi & Bluetooth radio is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC.

Declaration of RoHS2 Compliance

This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European

Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic

equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the

European Technical Adaptation Committee (TAC) as shown below:

Substance Proposed Maximum Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex III of the RoHS2 Directives as

noted below:

Examples of exempted components are:

1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps (CCFL and EEFL) for

special purposes not exceeding (per lamp):

(1) Short length ( 500 mm): maximum 3.5 mg per lamp.≦

(2) Medium length ( 500 mm and 1,500 mm): maximum 5 mg per lamp.＞ ≦

(3) Long length ( 1,500 mm): maximum 13 mg per lamp.＞

2. Lead in glass of cathode ray tubes.

3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.

4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.

5. Copper alloy containing up to 4% lead by weight.

6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

7. Electrical and electronic components containing lead in a glass or ceramic other than

dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound.

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank you for being part of

Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

Produktspezifikationen

Marke:	ViewSonic
Kategorie:	Monitor
Modell:	SD-A245
Touchscreen:	Ja
Bildschirmdiagonale:	24 "
Bildschirmtechnologie:	LED
Eingebautes Mikrofon:	Ja
Eingebaute Lautsprecher:	Ja
Integrierte Kamera:	Ja
Produktfarbe:	Weiß
RMS-Leistung:	4 W
AC Eingangsspannung:	100 - 240 V
Kopfhörerausgänge:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 90 %
Verpackungsbreite:	735 mm
Verpackungstiefe:	164 mm
Verpackungshöhe:	520 mm
Paketgewicht:	8500 g
Zertifizierung:	CE, CB, BSMI, NCC, C-Tick, UL/CUL, FCC-B, FCC-C, IC RSS-210, SRRC, Gost-R, FAC, WEEE, RoHS, REACH, SVHC, ErP
Stromverbrauch (Standardbetrieb):	65 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Plug & Play:	Ja
HD-Typ:	Full HD
Bildschirmform:	Flach
Bildschirmdiagonale (cm):	60.96 cm
Helligkeit:	250 cd/m²
Reaktionszeit:	5 ms
Kontrastverhältnis:	1000:1
Bildwinkel, horizontal:	170 °
Bildwinkel, vertikal:	160 °
Anzahl HDMI-Anschlüsse:	1
Unterstützt Windows-Betriebssysteme:	Ja
Sichtbare Größe (diagonal):	604.5 mm
Gewicht (ohne Ständer):	7200 g
Breite (ohne Standfuß):	610 mm
Tiefe (ohne Standfuß):	480 mm
Höhe (ohne Standfuß):	75 mm
Panel-Montage-Schnittstelle:	100 x 100 mm
Unterstützt Mac-Betriebssysteme:	Ja
Netzteiltyp:	AC
Full-HD:	Ja
Neigungswinkelbereich:	15 - 70 °
Kabelsperre-Slot:	Ja
Speicherkapazität:	1024 MB
Interner Speichertyp:	DDR3
Unterstützung von Positionierung:	Horizontal
LED-Hintergrundbeleuchtung:	Ja
Wandmontage:	Ja
Eingebauter Prozessor:	NVIDIA Tegra 33
HDMI:	Ja
NVIDIA G-SYNC:	Nein
AMD FreeSync:	Nein
Display, sichtbarer Bereich BxH:	482.6 x 271.8 mm
Typ der Hintergrundbeleuchtung:	W-LED
Anzahl der nachgeschalteten Steckplätze vom Typ USB-A:	2
Anzahl der gleichzeitigen Touchpoints:	2
Anschluß zu PC:	Ja
Display-Auflösung:	1920 x 1080 Pixel