Victor 1460-4 Bedienungsanleitung
Victor
Kalkulator
1460-4
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Victor 1460-4 (7 Seiten) in der Kategorie Kalkulator. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
Preface
Congratulations on your choice of a Victor electronic calculator. Careful design, quality materials, painstaking
workmanship, and advanced research and production facilities have given you a calculator that, with proper care,
will provide many years of trouble-free service. To assure future protection, offered by Victor’s Extended
Guarantee Protection Program.
This operating manual describes the features and operation of the Victor 1460-4 electronic calculator. This
calculator features the four basic arithmetic operations, two independent tax keys, percentage and percentage-of-
change, change sign, sigma, item count, non-add/date functions, backspace, and cost, sell, margin keys.
Table of Contents
General Maintenance
Replacing the Ribbon
Paper Feed
Keyboard Diagrams
Key Features
Application Examples
Warranty
Extended Warranty
Preparation
BEFORE USING THE PRINTER FOR THE FIRST TIME:
Remove the tape holding the ink ribbon in place.
Before Beginning Calculation
1. Plug in AC power
2. Be sure that the paper roll and ribbon have bee installed properly.
3. Turn power switch on, and make sure that the display lights. A “C” will automatically be printed on
the paper tape.
4. Set decimal point selector switch at the desired position.
NOTE: Please remove the piece of tape holding the printer ribbon in place for transportation.
General Maintenance
1. Do not place the calculator in hot, dusty, or damp locations.
2. To clean the housing, use a silicon-treated cloth. Do not use water or detergents.
3. Do not place anything on the housing, particularly on the head of the printer mechanism.
4. Turn off the power switch before removing the plug from AC wall outlet.
5. Turn the power switch off while not in use.
How to Feed the Paper Tape
1. Plug in the calculator and turn it on.
2. Cut or tear evenly the end of the paper roll to get a straight edge.
3. Place the paper holder into position. (Fig.
4. Install the paper roll on the paper holder.
5. Insert the paper end into the printer slot. (Fig.
6. Press the Paper Feed (↑) key to feed the paper to an adequate length.
Replacing the Ribbon
Your calculator is shipped with a 2-color ribbon already in place. You do not need to install or change it before you
begin using the calculator. When you have been using your calculator for some time, however, the print will
gradually become faint, indicating that you should change the ribbon. To change the ribbon, follow these steps.
1. Remove the paper roll, tearing the paper at the rear of the calculator. Use the Paper Advance (↑) key to
feed the remaining paper tape through the printer. Then remove the printer cover.
2. Remove the old ribbon by pulling it upward.
3. Install the ribbon spool with the black edge up. Roll from the outside of the full spool and place the
first spool on the spindle not engaged by the lever. Thread the new ribbon along the outside of the
guides and in front of the print wheels. Switch the lever to the other side and replace the second spool.
4. Rotate the spools to take up any slack. Replace the printer cover and the paper tape.
(Replace with the Victor #7010 Ink Ribbon)
Keyboard Layout
This section describes the mode switches, data entry keys, and operating keys provided on your calculator. The
following terms are used in discussing your calculator’s operation:
¾ The accumulator is the area of the calculator’s logic that stores a running total of the results of addition
and subtraction operations. It is the “adding machine” portion of the calculator.
¾ The calculating register is the area of the calculator’s logic where the intermediate and final results of
multiplication, division, and percentage calculations are stored. The contents of the calculating register do
not affect the accumulator.
¾ The keyboard register is the area of the calculator’s logic that stores the value that will immediately be
used in the next calculation.
¾ The item count register is the area of the calculator’s logic that counts your entries into the accumulator.
Each positive or negative entry is counted as one item.
¾ The memory register is the area of the calculator’s logic that accumulates amounts you add or subtract
from the memory. Because the memory register is independent of the accumulator and the calculating
register, it retains its value until you clear it with the Memory Total (MT) key.
Produktspezifikationen
| Marke: | Victor |
| Kategorie: | Kalkulator |
| Modell: | 1460-4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Victor 1460-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kalkulator Victor
15 August 2024
15 August 2024
15 August 2024
14 August 2024
13 August 2024
12 August 2024
12 August 2024
11 August 2024
9 August 2024
8 August 2024
Bedienungsanleitung Kalkulator
- Kalkulator Genius
- Kalkulator HP
- Kalkulator Lexibook
- Kalkulator Canon
- Kalkulator Trevi
- Kalkulator Sharp
- Kalkulator Rex
- Kalkulator Olympia
- Kalkulator Casio
- Kalkulator Citizen
- Kalkulator Ibico
- Kalkulator Olivetti
- Kalkulator United Office
- Kalkulator Omron
- Kalkulator Sencor
- Kalkulator Sigma
- Kalkulator Rexel
- Kalkulator Globaltronics
- Kalkulator Milan
- Kalkulator Q-CONNECT
- Kalkulator Texas Instruments
- Kalkulator Tiger
- Kalkulator Genie
- Kalkulator Aurora
- Kalkulator Texas
- Kalkulator Global Tronics
- Kalkulator Calculated Industries
- Kalkulator Addimult
- Kalkulator Victor Technology
Neueste Bedienungsanleitung fĂĽr -Kategorien-
10 Oktober 2024
6 Oktober 2024
4 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
27 September 2024
24 September 2024
23 September 2024
23 September 2024