Velleman VMA325 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Velleman VMA325 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
VMA325
COLOR SENSOR TCS3200 MODULE
USER MANUAL
VMA325
V. 01 19/03/2018 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman®! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
ï‚· This device can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
ï‚· Indoor use only.
Keep away from rain, moisture, splashing and dripping liquids.
3. General Guidelines
 Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
ï‚· Familiarise yourself with the functions of the device before actually using it.
ï‚· All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.
ï‚· Only use the device for its intended purpose. Using the device in an unauthorised way
will void the warranty.
ï‚· Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
ï‚· Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical…) arising from the possession,
use or failure of this product.
ï‚· Due to constant product improvements, the actual product appearance might differ from
the shown images.
ï‚· Product images are for illustrative purposes only.
ï‚· Do not switch the device on immediately after it has been exposed to changes in
temperature. Protect the device against damage by leaving it switched off until it has
reached room temperature.
ï‚· Keep this manual for future reference.
4. What is Arduino®
Arduino® is an open-source prototyping platform based in easy- -use hardware and software. Arduinoto ® boards
are able to read inputs light-on sensor, a finger on a button or a Twitter message and turn it into an output – –
– activating of a motor, turning on an LED, publishing something online. You can tell your board what to do by
sending a set of instructions to the microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino® software IDE (based on Processing).
Surf to and for more information. www.arduino.cc www.arduino.org
VMA325
V. 01 19/03/2018 3 ©Velleman nv –
5. Overview
VMA 532
The TCS230 senses colour light with the help of an 8 x 8 array of photodiodes. Then, using a current- -to
frequency converter the readings from the photodiodes are converted into a square wave with a frequency
directly proportional to the light intensity. Finally, using the Arduino
® board we can read the square wave
output and get the results for the colou r.
supply voltage: 2.7 to 5 VDC .5
dimensions : 28.4 28.4 x mm
6. Pin Layout
GND
ground
OUT
output frequency
S0
output frequency scaling selection input
S1
output frequency scaling selection input
S2
photodiode type selection input
S3
photodiode type selection input
V
5 VDC power supply
G
ground
OE
output enable, must be connected to G (ground)
LED
LED enable input , low=ON
7. Example
Connect your VMA325 to your microcontroller (VMA100) as above.
Download the library and data sheet from our website.
Open the Arduino IDE and import the three librar s. LiquidCrystal_I2C.h is only needed if you are also ie
connecting an I2C LCD to your controller.
Load the VMA325_code sketch into the IDE, compile and upload.
Start the serial monitor. You should see a result like this :


Produktspezifikationen

Marke: Velleman
Kategorie: Nicht kategorisiert
Modell: VMA325

Brauchst du Hilfe?

Wenn Sie Hilfe mit Velleman VMA325 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Velleman

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-