Velleman DCM267N Bedienungsanleitung

Velleman Multimeter DCM267N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Velleman DCM267N (28 Seiten) in der Kategorie Multimeter. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

DCM267N

DIGITAL CLAMP METER + DMM

DIGITALE MEETTANG/MULTIMETER

PINCE AMPÈREMÉTRIQUE/MULTIMÈTRE NUMÉRIQUE

PINZA AMPERIMÉTRICA DIGITAL + MULTÍMETRO

DIGITALE STROMZANGE + MULTIMETER

USER MANUAL 3

GEBRUIKERSHANDLEIDING 8

NOTICE D’EMPLOI 13

MANUAL DEL USUARIO 18

BEDIENUNGSANLEITUNG 23

DCM267N

00 (04/11/2008) 2 Velleman ®

DCM267N

00 (04/11/2008) 3 Velleman ®

User manual

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal

of the device after its lifecycle could harm the environment.

Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling.

This device should be returned to your distributor or to a local

recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, don't

install or use it and contact your dealer.

2. Safety Instructions

For indoor use only. Keep this device away from rain, moisture,

splashing and dripping liquids. Protect the device against extreme

heat (e.g. direct sunlight, heater …) and dust.

Keep the device away from children and unauthorised users.

Risk of electric shock.

Improper use of this device can cause damage, shock,

injury or death. Be very careful when measuring live circuits.

There are no user-serviceable parts inside the device.

Refer to an authorized dealer for service and/or spare parts.

• Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for any

ensuing defects or problems.

• Note that damage caused by user modifications to the device is not covered

by the warranty.

• All modifications of the device are forbidden for safety reasons.

• Caution: risk of electroshock when measuring voltages > 35VDC, 25VAC,

currents > 10mA, AC power lines with inductance load and AC power lines

with fluctuating power.

3. General Guidelines

• Protect this device from shocks and abuse. Avoid brute force when

operating.

• Familiarise yourself with the functions of the device before actually using it.

• Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

• Do not store or use the devices in places with high humidity or

temperature, places where combustible or explosive gasses reside or near

strong magnetic fields.

• Only use the included test leads. When damaged, replace them with test

leads of the same type and with the same specifications.

• Always verify that all connections are reliable and safe.

• Before measuring, always check the selected range. Always use the

device within its specified range.

• Always discharge capacitors and remove power from the device under test

before performing diode, resistance or continuity test.

Produktspezifikationen

Marke:	Velleman
Kategorie:	Multimeter
Modell:	DCM267N
Gewicht:	303 g
Abmessungen (BxTxH):	229 x 80 x 49 mm
Hintergrundbeleuchtung:	Ja
Temperaturmessbereich:	-50 - 1000 °C
Frequenzreichweite:	5 - 10000 kHz
Kontinuitätscheck:	Ja
Data-Hold:	Ja
DC Spannungsrange:	0.4 - 600 V
AC Spannungsrange:	0.4 - 600 V
Widerstandsreichweite:	400 - 40000000 Ohm
AC Stromreichweite:	40 - 1000 A
Kapazitätsreichweite:	40 - 100000 nF
Basic accuracy (AC Spannung):	±(2.5%+10d), ±(2.5%+5d), ±(3.0%+4d)
Basic accuracy (Kapazität):	±(5.0%+100d), ±(3.0%+5d), ±(3.5%+5d), ±(5.0%+5d)
Basic accuracy (Frequenz):	±(1.2%+2d), ±(1.5%+5d), ±(1.5%+10d)
Basic accuracy (Widerstand):	±(1.0%+4d), ±(1.5%+2d), ±(2.5%+3d), ±(3.5%+5d)
Basic accuracy (DC Spannung):	±(1.5%+3d), ±(0.8%+3d), ±(2.0%+3d)