Vax ONEPWR Blade 5 CLSV-B5DC Bedienungsanleitung

Vax Staubsauger ONEPWR Blade 5 CLSV-B5DC

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Vax ONEPWR Blade 5 CLSV-B5DC (26 Seiten) in der Kategorie Staubsauger. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/26
CLSV-B5KP CLSV-B5DC
DC
User Guide
VAX Blade 5
Cordless Vacuum
Don’ts
• Don’t leave the charger plugged in when unattended.
• Don’t use the machine if it is faulty or has been dropped, damaged or left
outdoors.
• Don’t use the machine to pick up any flammable or combustible materials (lighter
fluid, petrol, kerosene etc.) or use the machine in an area with explosive vapours
or liquid.
• Don’t use the machine to pick up hot coals, cigarette butts, matches or smoking
hot burning items or use in an area where there may be harmful fluids (chlorine,
bleach and ammonia drain cleaner).
• Don’t handle the charger, battery or use the machine with wet hands.
• Don’t unplug the charger by pulling on the power cord. The power cord cannot
be replaced. If the cord is damaged the charger should be scrapped.
• Don’t attempt to remove blockages with sharp objects as this may cause damage
to the machine.
• Don’t use the machine with the incorrect battery or charger as this may result in
damage or injury to the user. The correct battery charger information is listed on
the battery pack ratings label.
• Don’t charge the battery outdoors, or leave the charger connected to the mains
when not in use.
• Don’t use the machine with a damaged battery. If the battery is damaged contact
us on: 08000 927737
• Don’t use on a surface that is damaged, uneven or incorrectly fitted.
• Don’t over fill the dirt container to avoid blocking the air flow through the machine.
• The brushbar in the floorhead and mini motorised pet tool constantly rotates
when activated. Never use them on one spot for a prolonged period of time as
the brushbar may damage the floor surface.
Do’s
• Only VAX ONEPWR batteries (BVXXXXX) and chargers (BV05XXX) should be used
with this machine.
• Always stand the charger on a stable, level surface, uncovered and away from any
heat source.
• Always protect the charger power cord from heated surfaces or near open flames.
• Always check suitability with the manufacturer of your flooring prior to using the
machine.
This machine is intended for household use only, not for commercial or industrial use.
Please keep instructions for further use and only as instructed in this guide.
The full user guide can be found at: support.vax.co.uk
CLSV-B5KP
CLSV-B5DC
Safety Guide
VAX Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK
VAX Blade 5
• Always remove the battery from the machine before carrying out any maintenance
or if storing unused for a long period of time.
• Only VAX ONEPWR recommended tools and accessories should be used with this
machine.
• Keep all openings clear, free from debris and don’t overfill the dirt container as this
may affect the airflow/suction.
• Turn off all controls on the machine before disconnecting or connecting the battery.
This machine is not intended to be used or cleaned by persons with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, unless
they have been given instructions concerning the safe use of the machine by a
person legally responsible for their safety. They should be supervised whilst using
the machine. Children shall not use, clean or play with this machine, which when
not in use should be secured out of their reach.
• machine indoors on dry surfaces and keep the area you’re cleaning Only use the
well lit.
• Keep fingers, hair and loose clothing away from moving parts and openings whilst
using the machine.
• Store the machine in a cool, dry area. Keep the machine away from rain and
moisture.
• Use only CE/UKCA approved 13amp extension cords, non-approved extension
cords may overheat. Care should be taken to arrange the extension cord as it can
be a trip hazard.
• Take extra care when using the machine on the stairs.
• Always turn the brushbar off when cleaning hard floors and surfaces.
To prevent any damage being sustained, test on an inconspicuous area of the
flooring/surface first.
• Always make sure the separator and filter are fitted correctly before using your
machine and only use the machine with the filter and separator in place.
• Always check the powered floorhead, mini motorised pet tool and accessories are
free from damage, dirt and debris before using.
• This machine does not stay upright without constant support. Between uses, lie flat
on the floor in a suitable location so that it does not become a trip hazard or can be
stepped on.
Battery Safety Precautions
• Replace the battery with a VAX ONEPWR battery only. Use of another battery
may present a risk of fire or explosion.
• Don’t attempt to disassemble the battery, remove any component projecting from
the battery terminals and do not dispose of in a fire. The battery and charger
have no user serviceable parts. Fire or injury may result.
• Prior to disposal, protect exposed terminals with heavy insulating tape to prevent
shorting. The battery is to be disposed of safely at your local battery recycling
centre.
• When the battery pack is not in use, keep it away from other metal objects
that can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
• In case of battery leakages, avoid any contact with skin and contact us on:
08000 927737
22
Welcome to the Vax family!
You are now the proud owner of a VAX Blade 5.
Here, you’ll find everything you need to know about your machine and, most importantly, instructions on
how to get started so that you can get cleaning!
2
6
7
8
9
10
1 Carry handle
2 Dirt container
3 Filter cover and filter
4 Dirt container release latch
5 Dirt release button
6 Power ON/OFF
7 Boost ON/OFF
8 Carpet mode button
9 Hard Floor mode button
10 Digital display
11 Reach wand
12 Powered floorhead
13 Brushbar (hidden)
14 Brushroll
15 Battery dock
16 Filter cover release (hidden)
17 Inbuilt crevice tool
18 ONEPWR battery
19 ONEPWR charger
20 Powered hose*
21 Tech tool*
22 2-in-1 crevice tool and
dusting brush
23 Mini motorised pet tool
24 Wall mount
screws and wall plugs
15
16
17
Weight 3.3kg (without battery pack). Dirt bin capacity 0.6L.
Runtime and charge time dependent on battery pack and mode used.
*Powered hose and Tech tool included with model CLSV-B5DC only.
Subject to technical change without notice. Images are illustrative only.
20
1
2
5
3
4
11
13
12
14
23
18
21
HARD
FLO O R
CAR PET
* *
19
24
Registration and Support
All ONEPWR products come with
a standard one year warranty
Register your product to receive
2 YEARS FREE additional
warranty†
For details visit: vax.co.uk/registration
Scan here
For help and support with
your new product
or visit us online: support.vax.co.uk
Still need to get in touch?
Our UK based Customer Care Team are here to
support you. For help with assembly, operational or
performance problems, or buying and fitting new
accessories, you can find all our contact details at
vax.co.uk/contact
This user guide can be found online at:
support.vax.co.uk
† Registration required. Terms and conditions apply,
see vax.co.uk for details.
2
Press the battery symbol
to check the battery status.
Charging the battery
Fully charge the battery
before first use.
1
A
h
t
t
t
T
i
w
3Operation
Switch on the
machine and
select a mode:
HARD FLOOR
CARPET
BOOST
Increases suction
3
Quick Start
HARD
FLOO R
CARPET
4
If a Vax machine is used in the way it is intended and it breaks down within the
guarantee period, it’s our responsibility to repair or replace it.
Here’s what isn’t covered:
• Normal wear and tear of consumable items, for example: belts, filters, brushbars,
fuses etc.
• Batteries which have become faulty as a result of improper handling.
• Batteries which have a reduced service life as a result of normal wear.
• Accidental damage
- Damage as a result of use not in accordance with the product user guide.
- Damage caused by not carrying out regular maintenance.
- Damage to the charger cable.
- Blockages caused by misuse.
• Faults caused by:
- Negligent use, misuse, neglect or careless operation of the machine.
- Use of the machine cleaner which is not in accordance with the user guide.
- Use of a Vax machine for anything other than normal domestic household
purposes in the country in which it was purchased.
- Use of parts, accessories and consumables, which are not genuine Vax
components.
- Faulty installation or repairs – unless carried out by a qualified electrician or
engineer.
Technical
Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on
our own responsibility, declare that the VAX Blade 5 series is manufactured in
compliance with the following Legislation:
Safety: 2014/35/EU Low Voltage Directive/Electrical Equipment (Safety)
Regulations 2016. EMC: 2014/30/EU Electromagnetic Compatibility Directive/
Electromagnetic Compatibility Regulations 2016.
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.
VAX is a trade mark of Techtronic Cordless GP.
© 2021 Techtronic Cordless GP. All rights reserved.
Vax Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.
Warranty
Warranty and technical
5
Without the handheld attached to the
reach wand and powered floorhead,
push the wall mount onto the top and
back of the reach wand.
Choose a location for the machine to be
stored. Stand the powered floorhead
and wand against the wall, ensuring the
powered floorhead is flat on the floor.
Holding the wall mount securely against
the wall, make a small mark for each
screw. Secure the wall mount to the
wall using the wall plugs and screws.
To assemble align the white arrows. Rotate the dirt container
onto the handheld. Push until it clicks into place.
Attach the handheld to the reach wand until it clicks into place.
Attach the reach wand to the powered floorhead until it clicks
into place.
Assembly
Attaching the wall mount
Getting started
8
NOTE: For best performance the brushbars should be set to the correct mode for carpets and hard
floors. Use of the boost mode and brushbars will reduce the battery runtime.
Press the power button to switch the
machine on. The machine will start with
the brushbar off. The digital display
will illuminate and show the remaining
runtime.
Press the CARPET or HARD FLOOR button to select floor mode. When a mode button is activated the selected mode will illuminate
and the remaining runtime will display.
Hard Floor
Carpet
Getting started
Operation
Carpet and hard floor modes
45
27
Minutes
39
Minutes
9
Press the Boost button to increase the suction for particularly dirty
areas. The digital display will turn green and the + Boost icon will
illuminate to show Boost mode is activated.
When the machine is in use the digital display will indicate how much charge is remaining. When the battery is low, additional icons
will show on screen. At this stage, it is advisable to change the battery.
Brushes can be switched OFF for delicate floors and flooring not suitable for use with a
rotating brushbar.
Press the activated floor mode button to switch the brushbar off. The digital display will
change to ‘Brush Bar Off’ and the runtime will alter.
Getting started
Boost mode and low battery
45
27
Minutes
Minutes
12
04 03
10
All of the accessories, including the 2-in-1 tool, tech tool, mini
motorised pet tool and powered floorhead, can be attached
directly onto the handheld, reach wand or powered hose.
The powered hose, crevice tool and dusting brush can be
used for hard to reach places and at different heights for
above floor cleaning.
To remove the tools, press the button on the tool and
pull to release.
2-in-1 tool
For delicate surfaces and
skirting boards. Use with
boost mode for optimum
performance.
Tech tool
For delicate electronics
and screens.
Mini motorised pet tool
Ideal for removing embedded
dirt and pet hair. Specially
designed to give you
performance cleaning for
compact spaces like stairs,
car boots and footwells.
Powered hose
Extends for reaching
awkward areas. Powered for
use with the mini motorised
pet tool and floorhead.
Can also be used with the
standard dusting brush and
crevice tool.
Additional tools can be purchased at vax.co.uk.
Getting started
Using the tools
13
To remove any threads or hair, slide
the blade of a pair of scissors into the
groove on the brushbar and cut along
the groove.
IMPORTANT: If the brushbar or brushroll has been obstructed, the motor protection sensor may
activate. The brushes will stop and the light on the powered floorhead will illuminate red. Switch off
the machine, clear any obstruction and wait 1 minute before reactivating.
NOTE: For best performance and to reduce hair and dirt build up, remove and clean the brushbars
every 1-2 months (depending on the level of use).
Pull the brushbar out from the
brush housing.
Clear any dirt/debris from the end caps
and inside the brush housing.
Using a coin, push and turn the
brushbar cover anticlockwise to the
unlock symbol.
Refit the brushbar into the floorhead.
Align the arrow on the brushbar cover
to the unlock symbol, push firmly until
the cover sits flush and turn to
lock into place.
Cleaning and maintenance
Removing and cleaning the powered floorhead brushbar


Produktspezifikationen

Marke: Vax
Kategorie: Staubsauger
Modell: ONEPWR Blade 5 CLSV-B5DC

Brauchst du Hilfe?

Wenn Sie Hilfe mit Vax ONEPWR Blade 5 CLSV-B5DC benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Staubsauger Vax

Bedienungsanleitung Staubsauger

Neueste Bedienungsanleitung für -Kategorien-