Union Special 35800 Bedienungsanleitung
Union Special
Nähmaschine
35800
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Union Special 35800 (61 Seiten) in der Kategorie Nähmaschine. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/61
40052737
No.E376-00
ENGINEER’S MANUAL
Feed-off-the arm, 3-Needle, Double Chainstitch Machine
35800 Series
®
Introduction
This Engineer’s Manual is written for the technical personnel who are responsible for the service and mainte-
nance of the machine.
The maintenance services to be done on this sewing machine should be based on this manual.
This manual gives the "Standard Adjustment" on the former section under which the most basic adjustment
value is described and on the latter section the "Results of Improper Adjustment" under which stitching errors
and troubles arising from mechanical failures and "How To Adjust" are described.
CONTENTS
1. Specications ........................................................................................................ 1
(1) Roller mechanism/clutch type ............................................................................................... 1
(2) Roller mechanism/belt type ................................................................................................... 2
2. Model list ................................................................................................................ 3
(1) Model list using the roller mechanism of the clutch type................................................... 3
(2) Model list using the roller mechanism of the belt type ....................................................... 3
3. Description of US model code .................................................................... 5
4. Description of model code .......................................................................... 6
5. Names of machine head .............................................................................. 7
6. How to pass the threads.............................................................................. 8
(1) Dierential feed....................................................................................................................... 8
(2) 1 piece feed ............................................................................................................................. 9
7. Standard adjustment ............................................................................................10
(1) How to remove the gauge components and upper feed roller ......................................... 10
(dierential feed mechanism and 1 piece feed mechanism)
(2) Timing between the looper and needle bar ........................................................................ 12
(3) Adjustment of the needle entry positions in the right-left and front-rear directions ..... 14
(4) Looper adjustment ............................................................................................................... 16
1) Looper return .....................................................................................................................................16
2) Adjustment of the clearance between the looper and needle ............................................................16
(5) Adjustment of the needle bar height .................................................................................. 18
(6) Adjustment of the looper motion paths.............................................................................. 20
(7) Adjustment of rear needle guide ......................................................................................... 22
1) Longitudinal adjustment of the rear needle guide ..............................................................................22
2) Height adjustment of rear needle guide .............................................................................................22
(8) Adjustment of feed dog height and longitudinal movement
(dierential feed dog mechanism) ...................................................................................... 24
1) Height of main feed dog.....................................................................................................................24
2) Height of differential feed dog ............................................................................................................24
3) Adjustment of longitudinal movement of main feed dog ....................................................................24
4) Adjsutment of vertical height of main feed dog and differential feed dog ..........................................24
5) Gradient of main feed dog and differential feed dog......................................................................... 24
(9) Adjustment of feed dog height and longitudinal movement
(1 piece feed dog mechanism) ............................................................................................ 26
1) Height of main feed dog.....................................................................................................................26
2) Adjustment of longitudinal movement of main feed dog ....................................................................26
(10) Adjustment of feed mechanisms ........................................................................................ 28
1) Adjustment of stitch length.................................................................................................................28
2) Adjustment of differential feed amount ..............................................................................................28
(11) Presser adjustment .............................................................................................................. 30
1) Adjustment of amount of rise of presser ............................................................................................30
2) Adjustment of presser bar pressure................................................................................................... 30
(12) Adjustment of upper feed roller .......................................................................................... 32
(13) Replacement of upper feed roller........................................................................................ 34
(14) Adjustment of drawing amount of upper feed roller ......................................................... 36
Produktspezifikationen
| Marke: | Union Special |
| Kategorie: | Nähmaschine |
| Modell: | 35800 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Union Special 35800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nähmaschine Union Special
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Bedienungsanleitung Nähmaschine
- Nähmaschine Juki
- Nähmaschine Sinbo
- Nähmaschine Emerio
- Nähmaschine Tristar
- Nähmaschine Medion
- Nähmaschine SilverCrest
- Nähmaschine Bestron
- Nähmaschine Guzzanti
- Nähmaschine AEG
- Nähmaschine Alfa
- Nähmaschine Ambiano
- Nähmaschine Siemens
- Nähmaschine Jata
- Nähmaschine Lervia
- Nähmaschine IKEA
- Nähmaschine Durabase
- Nähmaschine Blaupunkt
- Nähmaschine Hema
- Nähmaschine Home Electric
- Nähmaschine Micromaxx
- Nähmaschine Mio Star
- Nähmaschine Solac
- Nähmaschine Privileg
- Nähmaschine Livoo
- Nähmaschine Easy Home
- Nähmaschine Prixton
- Nähmaschine Lifetec
- Nähmaschine Singer
- Nähmaschine Husqvarna
- Nähmaschine Termozeta
- Nähmaschine Crofton
- Nähmaschine Brother
- Nähmaschine Kohler
- Nähmaschine Primera
- Nähmaschine Veritas
- Nähmaschine Toyota
- Nähmaschine Janome
- Nähmaschine Victoria
- Nähmaschine Kayser
- Nähmaschine Jocca
- Nähmaschine Aigger
- Nähmaschine EasyMaxx
- Nähmaschine Bernina
- Nähmaschine Elna
- Nähmaschine Necchi
- Nähmaschine Pfaff
- Nähmaschine Dürkopp Adler
- Nähmaschine W6
- Nähmaschine E&R
- Nähmaschine Carina
- Nähmaschine Empisal
- Nähmaschine ER
- Nähmaschine Feiyue
- Nähmaschine Gritzner
- Nähmaschine Hofmann
- Nähmaschine Huskystar
- Nähmaschine Husqvarna-Viking
- Nähmaschine Kenmore
- Nähmaschine Lewenstein
- Nähmaschine Mediashop
- Nähmaschine Muller
- Nähmaschine Novamatic
- Nähmaschine Siemssen
- Nähmaschine Silver
- Nähmaschine Sinojo
- Nähmaschine Tesco
- Nähmaschine Vendomatic
- Nähmaschine Weasy
- Nähmaschine Yamata
- Nähmaschine Zippy
- Nähmaschine Kunft
- Nähmaschine Meister Craft
- Nähmaschine RCE
- Nähmaschine Yamato
- Nähmaschine Baby Lock
- Nähmaschine Łucznik
- Nähmaschine Anker-Bernette
- Nähmaschine LERAN
- Nähmaschine Prince
- Nähmaschine Bernette
- Nähmaschine Sewmaq
- Nähmaschine SteamMax
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024