Turbosound FK-1061 Bedienungsanleitung

Turbosound Lautsprecher FK-1061

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Turbosound FK-1061 (8 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
TCS-1061
Quickstart and Rigging User Guide
(Please refer to www.turbosound.com for the latest updates)
Version 1.0
Quick Start Guide
TCS series
TCS series Quickstart Guide v1.0 - Page - 2
The Flying Systems
FK-1061 Flying kit
(up to 5 cabinets deep)
FB-1061 Flying g
r
id
(up to 16 cabinets deep)
Quick Start Guide
TCS series
TCS series Quickstart Guide v1.0 - Page - 3
Safety Information
Safety Notes on Rigging
The Turbosound rigging system has been designed and constructed to a high standard of safety, and
tested to the most demanding of specifications. In order to ensure the highest safety standards, this
information on the assembly and safe use of rigging accessories must be understood and followed.
Only use Turbosound recommended rigging accessories, which are specifically designed for their intended purpose. Do
not use Turbosound rigging with other types or brands of loudspeakers. This practice may compromise safety
standards and Turbosound will not be responsible for damage or injury so caused. Do not modify the rigging
accessories, or use them in a way other than that described in this user manual. Rigging components supplied as part
of a complete assembly are non-interchangeable and must not be exchanged with the component parts of any other
assembly. The component parts of a Turbosound rigging accessory must only be assembled using the fasteners and
methods of assembly recommended in this guide. The use of fasteners and methods of assembly not specified or
approved by Turbosound may result in an unsafe rigging assembly. Welding, or any other means of permanently fixing
rigging components to each other or to cabinet fixing points is not allowed. Rigging assemblies must only be
assembled using the appropriate parts and fixings as specified in this manual using the specific mounting instructions.
Rigging components or assemblies must only be fixed to Turbosound loudspeaker cabinets using the cabinet fixing
points, assembly methods and fasteners specified in this guide and the specific mounting instructions. When
assembling the loudspeaker array ensure that all fixings are securely tightened before lifting the array.
Secondary Safeties
All TCS-1061 loudspeaker clusters flown in theatres, studios or other places of work and entertainment must, in
addition to the principle load bearing means of suspension, be provided with an independent, and properly rated and
securely attached secondary safety. Only steel wire ropes or steel chains of an approved construction and load rating
may be used as secondary safeties.
Safety Inspections
Carefully inspect rigging systems components and cabinets for defects or signs of damage before proceeding to
assemble a flown array. If any parts are damaged or suspect, DO NOT U
DO NOT U
DO NOT U
DO NOT UDO NOT USE THEM
SE THEM
SE THEM
SE THEMSE THEM.
Regular, more rigorous test and inspection of rigging components must also be carried out. Safety legislation and test
and inspection requirements will vary from country to country. In most cases, annual independent test and inspection
by a suitably approved and qualified inspector will be required. Users must ensure compliance with all applicable safety
requirements. Turbosound recommends regular safety inspections and further recommends that a logbook be kept
detailing the test and inspection history of each Turbosound rigging accessory. Always wear protective headwear,
footwear and eye protection in accordance with local regulations. Anyone involved in flying ANY sound system should
take note of the following advice:
The rigging of a flown sound system may be dangerous unless undertaken by qualified personnel with the required
experience and certification to perform the necessary tasks. Fixing of hanging points in a roof should always be carried
out by a professional rigger and in accordance with the local rules of the venue. The house rigger and/or building
manager must always be consulted.

Produktspezifikationen

Marke: Turbosound
Kategorie: Lautsprecher
Modell: FK-1061

Brauchst du Hilfe?

Wenn Sie Hilfe mit Turbosound FK-1061 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Turbosound

Turbosound

Turbosound TS-PC15B-1 Bedienungsanleitung

2 Oktober 2024
Turbosound

Turbosound TS-PC12-1 Bedienungsanleitung

2 Oktober 2024
Turbosound

Turbosound TS-PC10-1 Bedienungsanleitung

2 Oktober 2024
Turbosound

Turbosound TQ-FB Bedienungsanleitung

1 Oktober 2024
Turbosound

Turbosound TS-PC18B-1 Bedienungsanleitung

1 Oktober 2024
Turbosound

Turbosound TS-PC15-1 Bedienungsanleitung

1 Oktober 2024
Turbosound

Turbosound iP2000-TB Bedienungsanleitung

5 September 2024
Turbosound

Turbosound iP3000-TB Bedienungsanleitung

5 September 2024
Turbosound

Turbosound KT12-HP Bedienungsanleitung

29 August 2024
Turbosound

Turbosound KT10-HP Bedienungsanleitung

29 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024