Tripp Lite NetDirector B022-U16-IP Bedienungsanleitung

Tripp Lite Schalter NetDirector B022-U16-IP

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tripp Lite NetDirector B022-U16-IP (59 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/59

Owner’s Manual

NetDirector™ 1U Rackmount

KVM Switches with IP Access

Models: B022-U08-IP, B022-U16-IP

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $50 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. FCC Information 3

2. User Notice 3

3. Package Contents 3

4. Introduction 3

4.1 Features 3

4.2 System Requirements 4

4.2.1 External Console 4

4.2.2 Computers 4

4.2.3 Remote Console 4

4.2.4 Supported Browsers 4

4.2.5 Custom KVM Cable Kits 4

4.2.6 Operating Systems 4

4.3 Components 5

4.3.1 Front View 5

4.3.2 Rear View 5

5. Installation 6

5.1 General Safety Instructions 6

5.2 Rack Mounting Instructions 7

5.3 Grounding 7

5.4 Installation 7

5.5 Network Setup-IP Address Conﬁguration 8

5.5.1 Local Console 8

5.5.2 IP Installer 8

5.5.3 Browser 9

5.5.4 Non-Browser Clients 10

6. KVM Operation 12

6.1 Sharing USB Peripheral Devices 12

6.2 Powering Off and Restarting 12

6.3 Local Console Login 12

6.4 Local Console Port Access 13

6.4.1 Local Console OSD Invocation Sequence 13

6.4.2 Local Console OSD Navigation 13

6.4.3 Local Console OSD Main Screen Headings 13

6.4.4 Local Console OSD F1 GOTO Function 13

6.4.5 Local Console OSD F5 Skip Function 13

6.4.6 Local Console OSD F6 Broadcast Mode (BRC) 14

6.4.7 Local Console OSD F7 Auto Scan Function 14

6.4.8 Local Console OSD F8 Logout Function 14

6.4.9 Local Console Pushbuttons 14

6.4.10 Local Console Hotkey Commands 14

6.5 Logging Into the KVM over IP 16

6.5.1 Logging In via Web Browser 16

6.5.2 Logging In via the AP Windows Client 17

6.5.3 Logging In via the AP Java Client 18

6.6 Web Browser and Non-Browser Remote Port Access 18

6.6.1 Port Access via Remote OSD 19

6.6.2 Port Access via Remote OSD Toolbar 19

6.6.3 Mouse Synchronization 20

6.6.4 Remote Auto Scan 21

6.6.5 Panel Array Mode 21

6.6.6 Remote Control Panel 22

7. Administration 25

7.1 Local Console OSD 26

7.1.1 Local Console OSD F2 LIST Function 26

7.1.2 Local Console OSD F3 Settings (SET) Page 26

7.1.3 Local Console OSD F4 Administration (ADM) Page 28

7.1.4 Local Console Firmware Upgrade 29

7.2 Remote OSD 30

7.2.1 Remote OSD List Drop-Down 30

7.2.2 Remote OSD Conﬁguration Tab 31

7.2.3 Remote OSD Administration Tab 31

7.3 Web Management Interface 42

7.3.1 General Information 42

7.3.2 Network 43

7.3.3 Security 44

7.3.4 ANMS 45

7.3.5 User Management 51

7.3.6 Customization 51

7.3.7 Maintenance 53

7.3.8 Log 53

7.4 Log Server 54

8. Speciﬁcations 57

8.1 OSD Default Settings 58

8.2 Keyboard Emulation 58

9. Warranty & Product Registration 59

Table of Contents

1. FCC Information

2. User Notice

3. Package Contents

This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take

adequate measures.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

All information, documentation and speciﬁcations contained in this manual are subject to change without prior notiﬁcation by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and speciﬁcally disclaims any

warranties as to merchantability or ﬁtness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed

“as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor or its dealer), assumes the

entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modiﬁcations to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected

prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

This package consists of:

• B022-U08-IP or B022-U16-IP KVM Switch

• 6 ft. USB/PS2 Combo KVM Cable Kits (x2)

• USB/PS2 Combo Console Cable Kit

• RJ11 to DB9 Firmware Upgrade Cable

• Rackmount Hardware

• External Power Supply

• Rubber Feet

• CD with Owner’s Manual, Quick Start Guide and Device Files

• Quick Start Guide

4. Introduction

4.1 Features

• 1U Rackmount KVM Switch with built-in IP access.

• Connect either USB or PS/2 computers using P778-Series USB/PS2 Combo KVM Cable Kits – no need for separate cable kits.

• Control up to 8 (B022-U08-IP) or 16 (B022-U16-IP) computers on a single KVM switch.

• Remotely access computers via LAN, WAN or Internet via the Windows™ or Java browser clients.

• AP Windows and Java clients allow the KVM to be remotely accessed via the network without going through a browser.

• External USB 1.1 port allows USB peripheral devices to be shared amongst connected computers.

• Grayscale feature allows you to view remote sessions in black and white, reducing the amount of data traveling over the network and improving

keyboard/mouse response time over IP.

• Web management interface, OSD and toolbars provide convenient, user-friendly operation.

• 3-level security (Admin, User and Select) – up to 64 accounts can be created.

• Panel Array Mode – remotely monitor multiple ports at the same time.

• Message board feature allows users who are logged in at the same time to communicate with each other and manage port access.

• CD includes a Windows-based log server that records events on the installation and writes them to a searchable database.

• Supports RADIUS and LDAP/S authentication.

• Flash ﬁrmware upgradable via network and included ﬁrmware upgrade cable.

• Supports both IPv4 and IPv6.

• Supports Link Local IPv6 Address and IPv6 Stateless Auto conﬁguration protocol.

• Web Management Interface, Remote OSD and Local OSD can be displayed in English, Spanish, French, German and Japanese.

• Advanced encryption technologies: 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES, 168-bit 3DES.

• Video resolutions up to 2048 x 1536, DDC2B are supported at the local console. Video resolutions up to 1600 x 1200 @ 60Hz,

24-bit color depth are supported at the remote console.

Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other

devices in the installation.

Produktspezifikationen

Marke:	Tripp Lite
Kategorie:	Schalter
Modell:	NetDirector B022-U16-IP
Upgradefähige Firmware:	Ja
Breite:	431.8 mm
Tiefe:	152.4 mm
Gewicht:	2450 g
AC-Netzadapter:	Ja
Mitgelieferte Kabel:	AC,Phone (RJ-11),USB
Produktfarbe:	Schwarz
Höhe:	44.4 mm
Energiequelle:	AC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
DC input Spannung:	5.3 V
Eingebautes Display:	Nein
Anzahl USB 2.0 Anschlüsse:	2
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 80 %
Verpackungsbreite:	233.7 mm
Verpackungstiefe:	541 mm
Verpackungshöhe:	116.8 mm
Paketgewicht:	3760 g
Unterstützte Sicherheitsalgorithmen:	1024-bit RSA,128-bit RC4,128-bit SSL,256-bit AES
Eingebauter Ethernet-Anschluss:	Ja
Warentarifnummer (HS):	8471.80.1000
Ursprungsland:	Taiwan
Betriebsanleitung:	Ja
Zahl der Benutzer:	1 Benutzer
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 60 °C
Rack-Einbau:	Ja
Anzahl Produkte pro Versandkarton:	3 Stück(e)
Gewicht Versandkarton:	12160 g
Länge des Versandkartons:	563.9 mm
Breite des Versandkartons:	375.9 mm
Höhe des Versandkartons:	259.1 mm
Ausgangsstrom:	2.4 A
Ausgangsspannung:	5.3 V
Externes Netzteil:	Ja
Schnellinstallationsanleitung:	Ja
Maximale Auflösung:	2048 x 1536 Pixel
Treiber enthalten:	Ja
Anzahl PS/2 Anschlüsse:	2
Nachhaltigkeitszertifikate:	RoHS
Eingangsstrom:	0.5 A
Rackmontageset:	Ja
Kurzbefehle:	Ja
Hauptkarton GTIN (EAN/UPC):	10037332188042
Video Porttyp:	VGA
Rack-Kapazität:	1U
Schaltknopf:	Ja
Konsolenanschluss:	PS/2,USB A,VGA (D-Sub)
Anzahl der Computer:	16
Tastatur Porttyp:	USB, PS/2
Maus-Porttyp:	USB, PS/2
Auto-Scanverzögerung (min.):	1 s
Auto-Scanverzögerung (max.):	255 s
Bildschirm-Anschluss:	Ja
Scanning interval:	1,255 s
Umschalttasten Display:	Ja
Software enthalten:	Ja