Transcend JetDrive 520 Bedienungsanleitung

Transcend Festplatte JetDrive 520

Lies die bedienungsanleitung für Transcend JetDrive 520 (11 Seiten) kostenlos online; sie gehört zur Kategorie Festplatte. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11 Bewertungen. Hast du eine Frage zu Transcend JetDrive 520 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/11
1
Users Manual
Transcend
®
JetDrive Firmware Update Utility
Version 1.1
2
Supported Operating Systems
Supported on Mac OS: Mac OS X Lion (10.7) or later, and Mac that is produced after 2010
Note:
You must have Administrator Privileges on your Mac to run this utility.
Before Use
1. Updating your JetDrive
may result in data loss. Therefore, we strongly recommend you
back up your data before proceeding.
2. Please DO NOT unplug the device or the power source during firmware update. This
may cause unpredictable damage.
3. Please DO NOT use the firmware update utility to downgrade the firmware to an older
version
Preparation for Mac OS
A USB flash drive with minimum 128MB capacity.
The image file you downloaded from Transcend website.
Backup your USB data first before you restore image to the USB flash drive. The
restore operation will repartition and format your USB flash drive so the data in it will
be lost.
Getting Started
There are four steps to perform firmware update on Mac OS:
1. Partition and format the USB flash drive
2. Restore image file to the USB flash drive
3. Boot from the USB flash drive
4. Perform Firmware update
3
Partition and format the USB flash drive
1. Launch Disk Utility.
2. Select your USB flash drive and click the Partition tab.
3. Select “MS-DOS(FAT)” as the format and select “1 Partition” as the Partition Layout.


Produktspezifikationen

Marke: Transcend
Kategorie: Festplatte
Modell: JetDrive 520

Brauchst du Hilfe?

Wenn Sie Hilfe mit Transcend JetDrive 520 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten