TP-Link VIGI C350 Bedienungsanleitung

TP-Link Sicherheitskamera VIGI C350

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link VIGI C350 (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Mounting Template Self-tapping Screw

Quick Start Guide

*Images may dier from actual products.

Appearance

*The camera’s standard power supply is 12V DC or PoE (802.3af/at).

RESET Button

Lens

White Light

IR LED

Power Supply Interface (12V DC)*

8RJ45 Ethernet Port (supports PoE)*

7Speaker

Microphone

Package Contents

Network Camera Waterproof Cable

Attachments

Quick Start GuideAnchors and Screws

Quick

Start

Guide

•

Make sure your power supply matches your camera.

The camera’s standard power supply is 12V DC or

PoE (802.3af/at). The power source should comply

with Power Source Class 2 ( PS2) or Limited Power

Source(LPS) of IEC 62368-1.

• Make sure that the wall is strong enough to

withstand 4 times the weight of the camera and

mounting bracket.

• If you are uncertain or uncomfortable performing the

installation, consult a qualied electrician.

Safety First:

Installing Waterproof Cable Attachments

Install the waterproof cable attachments for the network

interface when the camera is installed outdoors.

Note: Make sure each part is securely attached and the waterproof

rings are ush to keep out water.

Done! The network interface is now waterproof.

1Mount Camera

Fix Nut Waterproof

Ring

O-ring Network

Interface

Waterproof

Jacket

1. Route the network cable through the following

components in order: x nut, waterproof ring, and then

the waterproof jacket.

2. Fix the O-ring to the network interface of the camera and

connect the network cables.

3. Attach the network interface with the waterproof jacket,

then twist to lock.

4. Insert the waterproof ring into the waterproof jacket.

Rotate the x nut to secure it to the waterproof jacket.

Note: Before inserting the microSD

card or resetting the camera, unfasten

the two xed screws to remove the

cover.

Mounting Template

microSD Card Slot

Insert a microSD card for local storage. Initialize

the SD card via VIGI app before recording videos.

Option 1: Wall/Ceiling Mounting

1. Stick the mounting template to the desired mounting place. Drill 4

screw holes according to the template.

2. Insert the anchors into the holes, use the provided screws to x

the camera’s bracket to the wall or ceiling.

3. Loosen the nut and rotate the camera to the desired position,

then tighten the nut.

Option 2: Pole Mounting

1. Thread each of the two cable ties through the slits on the back

of the camera’s bracket indicated below.

2. Slip the two cable ties through the pole. Tighten them to rmly

attach the pole.

3. Loosen the nut and rotate the camera to the desired position,

then tighten the nut.

Long press the button to reset

the camera to factory settings.

Micro SD RESET

When installing with anchors

Φ = 6 mm (15/64 in ).

When installing with screws only

Φ = 3 mm (1/8 in.)

Appropriate drilling size (Φ)

Φ6 mm Φ3.5 mm

Anchor

Mounting Template

Anchor

Self-tapping Screw

Nut

Cable Tie

More Management Methods

1. Download the VIGI Security Manager on your

computer at

https://www.tp-link.com/support/download/vigi-s

ecurity-manager/.

2. Install the and open it. VIGI Security Manager

3. Cameras on the same network as your computer

can be automatically discovered. Go to Settings >

Discovered Devices + Add, click to activate your

discovered cameras by setting passwords, and

follow the instructions to add your cameras.

Method 1: Via the VIGI Security Manager

(Windows only)

You can also access and manage your cameras via any of the methods below.

View live video and modify camera settings on

your computer.

Method 3: Via a Web Browser

View live video and modify camera settings via a

web browser.

1. Find the camera's IP address on your router’s client

page.

2. On your local computer, open a web browser and enter

https://camera's IP address (https://192.168.0.60 by

default).

3. Select your Country/Region and Time Zone.

4. Set a password to activate the camera.

Done. You can view the live video on the Preview page, and

go to the Settings page to change camera settings.

Method 2: Via the TP-Link VIGI App

Remotely view live video, manage cameras, and

get instant alerts.

1. Dow app.nload and install the TP-Link VIGI

2. Open the TP-Link VIGI app and log in with your

TP-Link ID. If you don’t have an account, sign up rst.

3. Tap the + button on the top right and follow the app

instructions to activate and add your cameras.

Use Your Camera with an NVR

VIGI NVR

Monitor

Network Device

(e.g., Switch or Router)

The camera works with an NVR for easier batch access and management.

*Here we use a VIGI NVR as an example.

Frequently Asked Questions (FAQ)

Q1: What can I do if no cameras are discovered?

• Refresh to discover your camera again.

• Make sure the camera is powered on.

• Make sure your camera and NVR/computer are in the same

subnet. If not, use the VIGI Security Manager to set

camera’s network parameters.

• Try to add your cameras manually.

• For other NVR brands, make sure you have activated the

camera by setting a password via the VIGI Security

Manager TP-Link VIGI app web management page, or .

Q2: How do I know the camera is powered on?

• The IR LED will turn on for 10 seconds once the camera is

powered on. If it’s o, you can cover the lens for several

seconds and check if the IR LED turns on.

• Check the LED status of the network device your camera is

connected to.

For more questions, please refer to

https://www.tp-link.com/support/faq/2850/

• Do not use any other chargers than those recommended.

• Do not use damaged charger or USB cable to charge the device.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

• Adapter shall be installed near the equipment and shall be easily accessible.

• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant

provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant

provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety)

Regulations 2016.

The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

Network Camera

Step 2. Power On the Cameras

Power on your cameras with the PoE power supply

or an external power supply.

Note: The camera’s standard power supply is 12V DC or PoE

(802.3af/at). The power source should comply with Power Source

Class 2 ( PS2) or Limited Power Source(LPS) of IEC 62368-1.

Step 1. Connect the Hardware

Connect your cameras to the same network as your

NVR (as shown above).

Step 3. Add Cameras with the NVR

Before you start, make sure the NVR is working properly.

1. Right click on the Live View screen and click Add

Camera.

2. Select your camera and click + to add your camera

directly. If you have disabled Plug and Play on your

NVR, create a password or use a preset password

for your camera.

Note: If you can’t nd your camera, refer to FAQ-Q1.

Done! You can now view live video and manage cameras.

Using your cameras with other NVR brands:

Step 1: Power on your cameras and connect them to the network.

Step 2: Activate the camera using the VIGI NVR VIGI Security Manager web management page, or (refer to the next section).

Step 3: Refer to the NVR’s User Manual to add cameras.

For technical support, replacement services, user guides, and more

information, please visit https://www.tp-link.com/support, or simply

scan the QR code.

Note: For more detailed instructions, refer to the user guides at

https://www.tp-link.com/support/

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Sicherheitskamera
Modell:	VIGI C350
Eingebautes Mikrofon:	Ja
Eingebaute Lautsprecher:	Ja
WLAN:	Nein
Bluetooth:	Nein
Breite:	186.88 mm
Produktfarbe:	Black, White
Internationale Schutzart (IP-Code):	IP67
Übertragungstechnik:	Kabelgebunden
Höhe:	71.55 mm
Energiequelle:	DC, PoE
Befestigungstyp:	Zimmerdecke
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	-30 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Netzstandard:	IEEE 802.3af, IEEE 802.3at
Unterstützte Netzwerkprotokolle:	TCP/IP, UDP, ICMP, HTTP, HTTPS, DHCP, DNS, RTSP, NTP, UPnP UDP, SSL/TLS
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Typ:	IP-Sicherheitskamera
Stromverbrauch (max.):	9 W
Verpackungsart:	Box
Gehäusematerial:	Kunststoff
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 60 °C
Luftfeuchtigkeit bei Lagerung:	0 - 95 %
Audio Kanäle:	1 Kanäle
Audio-System:	2-Wege
Eingebautes Licht:	Ja
Unterstützte Grafik-Auflösungen:	320 x 240,352 x 288,640 x 480 (VGA),704 x 576,1280 x 720 (HD 720),1920 x 1080 (HD 1080),2048 x 1280,2304 x 1296,2688 x 1520,2880 x 1620
Rauschverhältnis (SNR):	52 dB
Größe des Bildsensors:	1/2.7 "
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 90 °
Formfaktor:	Bullet
Kompatible Speicherkarten:	MicroSD (TransFlash)
Max. Speicherkartengröße:	256 GB
Webbrowser:	Ja
Länge (mm):	78.42 mm
Integrierter Kartenleser:	Ja
Videokompressionsformate:	H.264, H.264+, H.265, H.265+
Maximale Auflösung:	2880 x 1620 Pixel
Nachhaltigkeitskonformität:	Ja
Nachhaltigkeitszertifikate:	BSMI, CE, Federal Communications Commission (FCC), KC, VCCI
IP-Adressen Filter:	Ja
Reset-Knopf:	Ja
DC-Ausgang Volt:	12
Passwortschutz:	Ja
Samplerate:	8 kHz
Bis zu 30 Frames pro Sekunde:	30 fps
Megapixel insgesamt:	5 MP
Anzahl der Kameras:	1
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0.005 Lux
Anzahl der Linsen:	1
Abstandsfeststellung:	80 m
Eingebaute HDD:	Nein
Nachtsichtdistanz:	30 m
LED Typ:	IR
Videostreaming:	Ja
Sensor-Typ:	CMOS
Live-View:	Ja
Bildqualitätsanpassung:	Brightness, Contrast, Saturation, Sharpness
Nachtsicht:	Ja
Kamera Verschlusszeit:	1/3 - 1/10000 s
Anzahl der Sensoren:	1
Vollbildverfahren:	Ja
Maximale Blendenzahl:	1.6
Datenschutz-Maskierung:	Ja
Bitratenkontrolle:	Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Übertragungsgeschwindigkeit:	256 Kbps - 6 Mbps
Gegenlichtkompensation:	Ja
Highlight-Kompensation (HLC):	Ja
Digital Wide Dynamic Range (DWDR):	Ja
Region of Interest-(ROI)-Kodierung:	Ja
Smart-IR:	Ja
Video-Bewegungsmelder:	Ja
Intelligent Video Surveillance-(IVS)-System-Eigenschaften:	Fahrzeugerkennung
Verhaltensanalyse:	Intrusion detection, Line crossing detection, Object removal detection, Region exiting detection
Infrarot-Wellenlänge:	850 nm
Anzahl der Beleuchtungs-LEDs:	4
Stromverbrauch (Power over Ethernet (PoE)):	10.5 W
Infrarot (IR)-Abschaltfilter:	Ja
Betrachtungswinkel (horizontal):	90 °
Betrachtungswinkel (vertikal):	48 °
Feste Brennweite:	4 mm
Betrachtungswinkel des Objektivs, diagonal:	107 °
HTTPS-Verschlüsselung:	Ja
Audio input Kanäle:	1 Kanäle
Bereich der Bitrate:	0 - 64 Kbit/s
Anzahl der gleichzeitigen Live-View-Kanäle:	3 Kanäle
Digest-Authentifizierung:	Ja
Abstandserkennung:	16 m
Abstandsermittlung:	8 m
Klassifizierung von menschlichen und Fahrzeugzielen:	Ja
Abstandsbeobachtung:	33 m
Ethernet/LAN:	Ja
Anzahl der Bereiche zur Verdeckung der Privatsphäre:	4
Unterstützte Positionierung:	Draußen