TP-Link TL-SG2109WEB Bedienungsanleitung

TP-Link Schalter TL-SG2109WEB

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link TL-SG2109WEB (2 Seiten) in der Kategorie Schalter. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

7106508124 REV1.0.2

Installation Guide

Passive PoE Adapter

Connection

Use the passive PoE adapter to simultaneously supply power and transmit data to a passive PoE device.

AC Power Cord

Passive PoE Adapter

TL-POE2412G/TL-POE4824G

Installation

Package Contents: passive PoE adapter, power cord, wall mount kits

Ethernet Device

(switch, router, etc.)

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code

2. Attach the passive PoE adapter to the mounting bracket by sliding the

adapter in the direction of the arrows until it locks into place.

IP Camera AP CPE

Passive PoE Devices

Note: To ensure the passive PoE adapter is attached most securely, it is recommended to install the adapter with the Ethernet port facing upward.

1. Drill two holes on the wall and insert the plastic wall anchors into the

the holes. Secure the mounting bracket to the wall. Make sure the

shoulders at the corners of the mounting bracket are on the outside

and pointing upward.

Note: Before connecting a passive PoE device, please check the required voltage in its product manual.

Note: TL-POE2412G is used as an example throughout this guide. Other models may dier in appearance.

FAQ

A: Yes. Both the LAN and the PoE ports of the PoE adapter

comply with IEEE 802.3i and IEEE 802.3u standards and support

10/100Mbps Auto-Negotiation.

Q1. Can the PoE adapter supply power to a passive PoE device

which doesn’t have a gigabit Ethernet port?

Q2. Can the Passive PoE adapter supply power to all my PoE

devices?

A: If your devices support passive PoE and the voltage

standards of the devices match that of the passive PoE adapter,

the passive PoE adapter can supply power to them.

Specications

IEEE802.3i, IEEE 802.3u, IEEE 802.3abStandards

General Specications

Ports 10/100/1000Mbps Auto-Negotiation RJ45 portLAN

10/100/1000Mbps Auto-Negotiation RJ45 portPOE

UTP/STP of Cat. 5e or above (based on the

standards that the connected devices comply with)

Cable Type

Output Power

PWRLED

TL-POE2412G: 24V/0.5A

TL-POE4824G: 48V/0.5A

This is a class B product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

CE Mark Warning

Do not use this product near water, for example, in a wet basement or near a swimming

pool.

Avoid using this product during an electrical storm. There may be a remote risk of

electric shock from lightning.

SAFETY NOTICES

Cautions

FCC STATEMENT

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність

вимогам нормативних документів та вимогам, що передбачені чинними

законодавчими актами України.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

TP-Link hereby declares that the device is in compliance with the essential requirements

and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and

2011/65/EU.

The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.

Operationg Temperature 0 C to 40 C (32 F to 104˚ ˚ ˚ ˚F)

Storage Temperature -40˚C to 70˚C (-40˚F to 158˚F)

Storage Humidity 5% to 90%RH non-condensing

Operationg Humidity 10% to 90%RH non-condensing

Environmental and Physical Specications

Explanation of the symbols on the product label

DC voltage

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment

(WEEE). This means that this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

User has the choice to give his product to a competent recycling organization or to the retailer

when p2-he buys a new electrical or electronic equipment

Indoor use only

AC voltage

Energy eciency Marking

限用物質含有情況標示聲明書

產品元件名稱

限用物質及其化學符號

PCB

外殼

電源線

鉛

鎘

汞

六價鉻

CrVI

多溴聯苯

PBB

多溴二苯醚

PBDE

備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。

備考2. "○"系指該項限用物質之百分比含量未超出百分比含量基準值。

備考3. " - " 系指該項限用物質為排除項目。

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

LED & Button

Power

On: Power on

O: Power o

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Schalter
Modell:	TL-SG2109WEB
Upgradefähige Firmware:	Ja
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.3
Zertifizierung:	FCC, CE
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Switch-Typ:	Managed
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	9
Auto MDI/MDI-X:	Ja
Routing-/Switching-Kapazität:	18 Gbit/s
Port-Spiegelung:	Ja
Link Aggregation:	Ja
Abmessungen (BxTxH):	294 x 180 x 44 mm
Store-and-Forward:	Ja
Zugriffkontrollliste:	Ja
Max. Datenübertragungsrate:	1 Gbit/s
Datenrate:	10/100/1000 Mbps
Konnektivität LEDs:	Ja
Abmessungen (B x T x H) (in Zoll):	11.6 x 7.1 x 1.7 "
Temperatur Betriebsumgebung:	32 - 104 °F