TP-Link Archer Air R5 Bedienungsanleitung

TP-Link Router Archer Air R5

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für TP-Link Archer Air R5 (3 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

If your internet comes from an Ethernet outlet instead of a DSL / Cable / Satellite modem,

connect the router’s WAN port to it, then follow steps 3 and 4 to complete the hardware

connection.

Unplug the power to turn o your modem, if any, and

remove the backup battery if it has one.

Modem

Unplug the power

Power on the modem, and then wait

about for it to restart.2 minutes

Mount the Router on the Wall

Method TWO: Via mounting bracket

Method ONE: Via 3M Adhesives*

1. Mount the bracket on the wall in the

correct direction with the two provided

anchors and screws.

2. Attach the router on the bracket as shown

below.

2. Adhere the router vertically to a flat

surface that is out of children’s reach.

3M Adhesives

CAUTION:

3M adhesives may

damage the wall or leave

adhesive residue on the

wall when removed.

Caution, Hot Surface

The device should be used within a temperature range of 0°C-40°C.

When the router is working, the temperature on its back is high. Do not touch the router with bare hands, and do not stick or directly mount the

router to wallpaper, paper, wood, glass, non-heat-resistant paint, foam board, flammable and explosive materials, etc, to avoid burns,

discoloration, breakage or other accidental injury.

The back area of the router is used for heat dissipation. It works best when the router is mounted

on a wall.

It is recommended to mount the router to flat and smooth painted walls, tile walls, and other objects. Do not stick it on metal surfaces, so as not

to shield the wireless signal.

1. Tear off the protective paper from the

3M adhesives on the back of the

router.

*2 extra 3M adhesives are

provided for future use. Tip: You can use the included

spirit level to help install the

bracket horizontally.

The air bubble in the

level is centered.

Anchor

Screw

Scan for Tether Tether

Choose Your Device Type

Gaming Router

Range Extender

Wireless Router

To enjoy a more complete service from TP-Link,

bind your TP-Link ID to the router.

Set Up the Network

1. Connect your device to the router wirelessly

or with an Ethernet cable.

Let’s Get Started

http://tplinkwi.net

Method TWO: Via a Web Browser

2. Launch a web browser, and enter

http://tplinkwifi.net or http://192.168.0.1 in

the address bar. Create a password to log in.

3. Follow the step-by-step instructions to

set up the internet connection and

Note: If the login window does not appear, please refer to Q1 of

Need Help? in this guide.

Method ONE: Via TP-Link Tether App

1. Download the Tether app.

2. Open the Tether app and log in with your

TP-Link ID.

3. Tap the button in the Tether app and

select Wireless Router > Standard

Routers. Follow the steps to complete

the setup and connect to the internet.

Note: If you don’t have an account, create one first.

The default wireless network names (SSIDs) and password

are printed on the label at the back of the router.

On (red or blue)

JOIN PRESET WI-FI

Wireless Password/PIN:XXXXXXXX

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

Code

Connect the router to a power source

via the provided power adapter.

Connect the Hardware

*Image may dier from actual product.

Verify the LED is solid red or blue before moving on.

Connect the powered-off

modem to the router’s WAN

port with an Ethernet cable.

Internet

LAN WAN

WPS Button Note: This equipment shall

be installed at a height of

less than 2 meters.

Quality of Service (QoS)

Prioritize your bandwidth

needs for a better network-

ing experience.

Parental Controls

Manage online time and block

inappropriate content to to

maintain healthy online habits.

Network Protection

Detects cyber threats to keep

your privacy and connected

devices well protected.

Comprehensive Reports

Gain full statistics and insights

to help you know your home

network better.

TP-Link HomeShield premium security services keep your home network safe with

cutting-edge features. Download the Tether app to enjoy.

For more details, visit https://www.tp-link.com/homeshield/.

TP-Link HomeShield

· Keep the device away from water, re, humidity or hot environments.

· Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.

· Do not use any other chargers than those recommended.

· Do not use damaged charger or USB cable to charge the device.

· Do not use the device where wireless devices are not allowed.

· Adapter shall be installed near the equipment and shall be easily accessible.

· Do not use the included power adapter to charge other devices.

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support.

Q1. What should I do if I can’t access the web management page?

•

Reboot your router and try again.

•

If the computer is set to a static IP, change its settings to obtain an IP address automatically.

•

Verify that is correctly entered in the web browser. Alternatively, enter or in the web http://tplinkwifi.net http://192.168.0.1 http://192.168.1.1

browser.

•

Use another web browser and try again.

•

Disable and enable the network adapter in use.

Q2. What should I do if I can’t access the internet?

•

Power off your modem for about 5 minutes, then power it on and check the internet. If your modem has more than one Ethernet port, keep other

ports unconnected.

•

Check if the internet is working normally by connecting a computer directly to the modem via an Ethernet cable. If it is not, contact your internet

service provider.

•

og in to the web management page, and go to the page to check whether the internet IP address is valid or not. If it’s valid, go to Network Map

Advanced Network Internet Advanced Settings Use the Following DNS Addresses> > , click , select , set the primary DNS to 8.8.8.8, and set the

secondary DNS to 8.8.4.4. If it is not, check the hardware connection or contact your internet service provider.

•

For cable modem users, log in to the web management page of the router and go to Advanced > Network > Internet > MAC Clone Clone . Select

Current Device MAC and click SAVE. Then reboot both the modem and the router.

Q3. What should I do if I forget my wireless password?

• If you have not changed the default wireless password, it can be found on the label at the bottom of the router.

• Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at , and go to the http://tplinkwi.net

Wireless page to retrieve or reset your wireless password

Q4. What should I do if I forget my web management page password?

• If you are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it.

• Alternatively, press and hold the Reset button at the bottom for about 6 seconds until the LED blinks. Then visit http://tplinkwifi.net to create a new login

password.

Q5. What should I do if the router does not turn on when connected to a power source?

• Make sure the power source can supply power normally.

• Make sure you are using the included power adapter.

Need Help?

AX3000 Wi-Fi 6 Air Router

Quick Installation Guide

LED Explanation

The system is starting up or the router is being

upgraded. Do not disconnect or power o your

router.

The router is working normally.

WPS connection is being established. Do not

disconnect or power o your router.

O

Solid Red

Slowly Pulsing Red

Quickly Pulsing Red

Quickly

Pulsing Blue

Solid Blue

Slowly

Pulsing Blue

The router is not powered on.

WAN port is connected but there is no

internet connection.

WAN port is not connected.

WPS connection failed.

EasyMesh-Compatible

You can experience strong, stable, and seamless wireless connections throughout your

home with EasyMesh.

Flexible Scalability

Flexibly scale your home networking with dierent vendors,* dierent topologies, dierent

Protocols and dierent product categories.

One-Click Settings

Within 2 minutes, press the WPS button on the main router and the satellite device, then the

EasyMesh network is all set up. TP-Link routers in factory settings can be connected to form an

EasyMesh network directly without any redundant setup.

Seamless Roaming

Connects mobile devices to your routers or extenders that provide the best coverage. Devices

compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.

For more information, visit https://www.tp-link.com/easymesh/

*Failure may be due to rmware conicts of dierent vendors. A better network

connection can be established between all APs from TP-Link.

Scan for Setup Video

Produktspezifikationen

Marke:	TP-Link
Kategorie:	Router
Modell:	Archer Air R5
USB Anschluss:	Ja
WLAN-Standards:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Breite:	148 mm
Tiefe:	10.8 mm
Produkttyp:	Tabletop-Router
Produktfarbe:	Weiß
Höhe:	210 mm
Energiequelle:	USB
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Unterstützte Sicherheitsalgorithmen:	WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3
Unterstützte Netzwerkprotokolle:	IPv4, IPv6
Quality of Service (QoS) Support:	Ja
Eingebauter Ethernet-Anschluss:	Ja
Schnittstellentyp Ethernet-LAN:	Gigabit Ethernet
Zertifizierung:	FCC, CE, RoHS
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Betriebsanleitung:	Ja
Verpackungsart:	Box
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
Temperaturbereich bei Lagerung:	-40 - 60 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
USB-Ladeport:	Ja
Top WLAN-Standard:	Wi-Fi 6 (802.11ax)
Ethernet-WAN:	Ja
DSL-WAN:	Nein
SIM-Karten-Slot:	Nein
3G/4G USB Modem-Kompatibilität:	Nein
WLAN-Band:	Dual-Band (2,4 GHz/5 GHz)
WLAN Datentransferrate (max.):	2976 Mbit/s
WLAN-Datenübertragungsrate (erstes Band):	574 Mbit/s
WLAN-Datenübertragungsrate (zweites Band):	2402 Mbit/s
Gastzugang:	Ja
DHCP-Server:	Ja
Antennen-Design:	Intern
Reset-Knopf:	Ja
WPS Sicherheit per Tastendruck:	Ja
Wandmontage:	Ja
Anzahl der Gastnetzwerke (5 GHz):	1
Anzahl der Gastnetzwerke (2,4 GHz):	1
WAN-Verbindungstyp:	RJ-45