Tenda TEG1024F Bedienungsanleitung

Tenda Schakelaar TEG1024F

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tenda TEG1024F (5 Seiten) in der Kategorie Schakelaar. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
24-Port Unmanaged Switch Gigabit
with 2 SFP Slots
www.tendacn.com
TEG1024F
Product Description
24-Port Unmanaged Switch Gigabit
with 2 SFP Slots
24-Port Unmanaged Switch with 2 SFP SlotsGigabit
01
TEG1024F is a 24-port gigabit rackmount switch providing easy-to-use, cost-effective and fast network for IP
surveillance projects, offices, workgroups and small and medium-sized enterprises. With 2 gigabit SFP combo
ports used to connect to Tenda optical modules, it can be used for long distance networking up to 20 km.
TEG1024F also offers a data rate in full duplex of as high as 2000 Mbps, ensuring fast transmission of large files
and smooth playback of videos. With professional lightning protection circuit, the switch provides 6 kV lightning
protection for all the RJ45 ports and the power module, ensuring stability and reliability of the switch. TEG1024F
allows users to change its work modes among standard (default mode), flow control o, link aggregation and
port VLAN, fitting multiple network environments, making it the perfect choice for you to extend or upgrade your
high-speed, stable gigabit wired network at long distance.
TEG1024F
M : 3 Link Aggregation mode. In this mode, ports 23 and 24 form a static link
aggregation group (LAG). Traffic is distributed between the two ports based
on source and destination MAC addresses. When your switch works at the
edge of a network and one of its uplink ports is used to connect to a central
device, you are recommended to change the switch to this mode.
4 modes for different networks
M1: Standard mode, the default mode of the switch. In that mode, all ports
can communicate with each other, but the switch could not be managed
through web UI.
M : Port-based mode. In that mode, ports 1 to 2 can communicate with 4 VLAN 2
uplink ports (ports 2 and 2 ) but cannot communicate with each other. You 3 4
can use this mode to isolate DHCP broadcast and eliminate broadcast storm.
M2: Flow Control Off mode. In this mode, flow control is disabled on all ports.
02
Stable connection for 7*24
All ports support line-speed forwarding , and built-in 256KB SRAM for packet buffer ensure
the smoothly and timely transfer of large files and stable streaming video. Stay connected
for 7*24.
Excellent lightning protection
Professional integrated lightning protection circuit enables the 24 GE ports to provide
IV-class (6 kV in common mode) lightning protection, effectively decreasing the
damage rate to the uplink ports by lightning surge.
The built-in power supply module is designed with enhanced lightning protection,
which can withstand 6 kV lightning surge, 3 times higher than other ordinary
switches, effectively protecting the switch from being damaged by adverse thunder
storm.
Mark
24-Port Unmanaged Switch with 2 SFP SlotsGigabit
4
Modes
7x24
Stable connection
for 7x24

Produktspezifikationen

Marke: Tenda
Kategorie: Schakelaar
Modell: TEG1024F

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tenda TEG1024F benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schakelaar Tenda

Bedienungsanleitung Schakelaar

Neueste Bedienungsanleitung für -Kategorien-