Technoline WT 195 Bedienungsanleitung

Technoline Radiowecker WT 195

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Technoline WT 195 (4 Seiten) in der Kategorie Radiowecker. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

WT195 RADIO CONTROLLED CLOCK WITH TEMPERATURE –

USER’ INSTRUCTIONS

Please read the instructions carefully and keep the manual well for future reference.

GETTING STARTED

1. Remove the battery door.

2. Install two new AA size batteries as per the polarity information marked on the

battery compartment.

3. Replace the battery door.

4. Once the battery is installed, the normal segments of the LCD will be shown before

entering the radio controlled time reception mode.

5. The RC clock will automatically start scanning for the radio controlled time signal in

8 seconds.

Note

If no display appears on the LCD after inserting the battery, press the “RESET” key

by using a metal wire. In some cases, you may not receive the signal immediately.

Due to the atmospheric disturbance, the best reception often occurs during nighttime.

FUNCTION KEYS

CLOCK key:

- In normal time mode,press and hold it for 2 seconds to enter normal time setting.

- In setting mode, press it to step the setting items. Or press and hold it for 2 seconds

to return to normal time mode and save the values.

ALARM key:

- In normal time mode,press it to display alarm time for 5 seconds.Or press and hold

it for 2 seconds to enter alarm time setting.

- In setting mode, press it to step the setting items.

- After setting, press it again to save the setting values.

ALARM ON / OFF switch:

- Slide the switch to turn on/oﬀ the alarm.

DOWN key:

- In setting mode, press it to decrease the setting value. Press and hold it to speed up

the setting.

UP key:

- In setting mode, press it to increase the setting value. Press and hold it to speed up

the setting.

SNOOZE/LIGHT

- Press it once to turn on the backlight for 5 seconds.

- When the unit is sounding,press it to stop the current alarm and enter the snooze

mode.

NIGHT LIGHT FUNCTION ON/OFF switch:

- Slide it to ON position to turn on the night light function, that the backlight will turn

on automatically when the light-sensor can not sense light in dark environment.

- Slide it to OFF position to turn oﬀ the night light function.

RCC key:

- Press it to switch between Celsius and Fahrenheit.

- Press and hold it for 3 seconds to receive the RC signal for reception testing.

RESET key:

- Press it to set all values to default values. In case of mal-function, the unit may be

required to reset.

PRODUCT DESCRIPTION

1. LCD display

2. CLOCK key

3. ALARM key

4. ALARM ON/OFF switch

5. DOWN key

6. UP key

7. SNOOZE/LIGHT key

8. RESET key

9. RCC key

10. NIGHT LIGHT FUNCTION ON/OFF switch

11. Battery compartment

DISPLAY SYMBOLS

Normal time mode

1. Time

2. AM/PM

3. Month

4. Date

5. Day of the week

6. Temperature

7. Signal strength indication

8. Daylight saving time

Alarm time mode

1. Alarm time

2. AM/PM

3. Alarm icon

DAYLIGHT SAVING TIME (DST)

The clock has been programmed to automatically switch when the daylight saving

time is in eﬀect. Your clock will show “DST” during the summer.

SIGNAL STRENGTH INDICATOR

The signal indicator displays signal strength in 4 levels.

Wave segment ﬂashing means time signals are being received.

The signal quality could be classiﬁed into 4 types:

If the RC clock receives signal successfully, a sync- time symbol “ ” will appear on

the LCD. The unit has already received the time signal. Otherwise the signal strength

symbol will disappear from the LCD display.

Note

You may use the “RCC” button to receive the time signal manually. The unit will exist

the receive mode automatically after 6-12 minutes. Receive mode consumes more

battery power that may reduce battery lifetime.

TIME AND CALENDAR SETTING

If the clock does not receive the time signal successfully, you can set the time

manually. As soon as the transmitter is received again, the clock will automatically

synchronize with the received time.

1. In normal time mode, press and hold CLOCK key for 2 seconds until the Year digit

ﬂashes.

2. Press UP or DOWN key to set the desired value of the ﬂashing digit, press and

hold UP or DOWN key to speed up the setting.

3. Press CLOCK key again until the next digit ﬂashes.press UP or DOWN key to

change its value.

4. Repeat above operations to set the time and calendar in this order:

Year > Month > Date > 12/24-hr > Hour > Minute > Second > Language.

6 . Press the CLOCK key to save and exit the setting, or let it exit automatically 30

seconds later without pressing any key.

ALARM TIME SETTING

1. In normal mode,press and hold ALARM key for 2 seconds until Hour digit ﬂashes.

2. Press UP or DOWN key to set the desired value, press and hold UP or DOWN key

to speed up the setting.

3 . Press ALARM key again until Minute digit ﬂashes.and press UP or DOWN key to

change its value.

4 . Press ALARM key again to save and exit the setting, or let it exit automatically 30

seconds later without pressing any key.

Produktspezifikationen

Marke:	Technoline
Kategorie:	Radiowecker
Modell:	WT 195
Wecker:	Ja
Kalender:	Ja
Produktfarbe:	Schwarz
Akku-/Batterietyp:	AA
Snooze Funktion:	Ja
Anzahl unterstützter Akkus/Batterien:	2
Thermometer:	Ja
Abmessungen (BxTxH):	95 x 32 x 80 mm
Hintergrundbeleuchtung:	Ja
Weckerfunktion:	Ja