Tanita BC-350 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Tanita BC-350 (16 Seiten) in der Kategorie Persönliche Waage. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Instruction Manual
Read this Instruction Manual carefully and keep it for future reference.
Mode d´emploi
A lire attentivement et Ă  garder en cas de besoin.
Manual de instrucciones
Lea detenidamente este manual de instrucciones y guárdelo para futura referencia.
Manual de instruções
Leia cuidadosamente este manual e guarde-o para futura referĂŞncia.
Ironman and M-dot are registered trademarks of World Triathlon Corporation.
Model : BC-350
®
BC3507601(1)
Table of Contents
Introduction .............................................1
Features and functions ..............................2
Preparations before use ............................2
Getting accurate readings .........................3
Automatic shut-down function ..................3
Switching the weight mode .......................3
Setting and storing personal data in
memory ....................................................4
Taking body composition readings............5
Programming the guest mode ..................6
Taking weight measurement only .............6
Troubleshooting ........................................7
Specifications ............................................7
Table des matières
Introduction ..............................................8
Caractéristiques ........................................9
Avant utilisation ........................................9
Comment obtenir des résultats exacts ....10
Fonction d’arrêt automatique ..................10
Commutation du mode poids ..................10
Réglage et enregistrement des données
personnelles en mémoire ........................11
Relevés de composition corporelle .........12
Programmation du mode invitè ...............13
Lecture du poids uniquement .................13
DĂ©pannage ..............................................14
Caractéristiques ......................................14
ĂŤndice de materias
IntroducciĂłn ............................................15
Prestaciones y funciones ........................16
Preparaciones antes del uso ...................16
CĂłmo obtener lecturas exactas ...............17
Función de apagado automático .............17
Cambiando el modo del peso ..................17
Introduccion y alamacenamiento de
datos personales en la memoria .............18
CĂłmo realizar las mediciones de
composiciĂłn corporal .............................19
ProgramaciĂłn del modo de invitado .......20
CĂłmo obtener lecturas de peso
solamente ...............................................20
ResoluciĂłn de fallos ................................21
Detalles TĂ©cnicos ....................................21
Tabela de conteĂşdo
Introdução ..............................................22
Características e funções ........................23
Preparativos antes do uso .......................23
Obtendo leitura precisa ...........................24
Função desligamento automático ............24
Comutando o modo de medida ...............24
Programar e armazenar dados pessoais na
memĂłria ..................................................25
Obtendo medida de composição
corporal ..................................................26
Programando o modo visitante ...............27
Medindo somente o peso ........................27
Localizando defeitos ...............................28
Especificações ........................................28
1
Introduction
Thank you for selecting a Tanita Body Composition Monitor. This monitor is one in a wide range of
home healthcare products produced by Tanita.
This Instruction Manual will guide you through the setup procedures and outline the key features.
Please keep it handy for future reference. Additional information on healthy living can be found on
our website www.tanita.com.
Tanita products incorporate the latest clinical research and technological innovations.
All data is monitored by our Tanita Medical Advisory Board to ensure accuracy.
Actual measurements made by the BC-350 include weight and impedance. Based upon these
measured values, values are calculated for: body fat percentage, body water, muscle mass, physique
rating, bone mass, visceral fat rating.
Note : Read this Instruction Manual carefully and keep it handy for future reference.
Safety Precautions
Note that people with an electronic medical implant, such as a pacemaker, should not use a Body Composition Monitor as it
passes a low-level electrical signal through the body, which may interfere with its operation.
Pregnant women should use the weight function only. All other functions are not intended for pregnant women.
Do not place this monitor on slippery surfaces such as a wet floor.
Recorded data may be lost if the monitor is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility
for any kind of loss caused by the loss of recorded data. Tanita takes no responsibility for any kind of damage or loss caused by
the monitor, or any kind of claim made by a third person.
Important Notes for Users
This Body fat monitor is intended for adults and children (ages 7-17) with inactive to moderately active lifestyles and adults with
athletic body types.
Tanita defines “athlete” as a person involved in intense physical activity of approximately 10 hours per week
and who has a resting heart rate of approximately 60 beats per minute or less. Tanita’s athlete definition
includes “lifetime of fitness” individuals who have been fit for years but currently exercise less than 10 hours
per week.
The body fat monitor function is not intended for pregnant women, professional athletes or bodybuilders.
Recorded data may be lost if the unit is used incorrectly or is exposed to electrical power surges. Tanita takes no responsibility for
any kind of loss caused by the loss of recorded data.
Tanita takes no responsibility for any kind of damage or loss caused by these units, or any kind of claim made by a third person.
Note : Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or
over-hydration due to such factors as alcohol consumption, menstruation, illness, intense exercise, etc.
32
Getting accurate readings
To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not
undress, always remove your socks or stockings, and be sure the soles of your feet are clean before stepping on the measuring
platform. Be sure that your heels are correctly aligned with the electrodes on the measuring platform. Don’t worry if your feet
appear too large for the unit -accurate readings can still be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about three hours after rising, eating, or hard exercise before taking
measurements.
While readings taken under other conditions may not have the same absolute values, they are accurate for determining the
percentage of change as long as the readings are taken in a consistent manner. To monitor progress, compare weight and body fat
percentage taken under the same conditions over a period of time.
Note : An accurate reading will not be possible
if the soles of your feet are not clean, or if
your knees are bent or you are in a sitting
position.
Heels centered on
electrodes
Toes may overhang
measuring platform
Automatic shut-down function
The automatic shut-down function shuts off the power automatically in the following cases:
• If you interrupt the measurement process, the power will shut down automatically within 10 to 20 seconds, depending upon the
type of operation.
• If an extreme weight is applied to the platform.
• During programming, if you do not touch any of the keys or buttons within 60 seconds.*
• After you have completed the measuring process.
Note : If the power shuts off automatically, repeat the steps from “Setting and storing personal data in memory” (p.4).
You can switch the unit indication by using the switch on the back of the scale as
shown in the figure.
The unit should be turned on to switch the weight mode.
Note : If weight mode is set to pounds or stone-pounds, the height programming
mode will be automatically set to feet and inches.
Similarly, if kilograms is selected, height will be automatically set to centimetres.
Switching the weight mode Note : For use only with models containing the weight mode switch
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure
safe and accurate measurement.
Use carpet feet when the scale is used on soft surface, such as rugs or carpetings.
Note : To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny;
avoid soaps.
• Do not step on the platform when wet.
• Do not drop any objects onto the platform.
• Do not use this scale while operation transmitters (such as a cell phone) as this may affect your results.
Preparations before use
Inserting the Batteries
Turn the scale over and remove the battery cover by releasing the latch, install 2 pieces of new
battery (included) with correct polarity as indicated.
Note : Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly
positioned the fluid may leak and damage floors. If you do not intend to use this unit
for a long period of time, it is advisable to remove the batteries before storage.
Please note that the included batteries from factory may have decreased energy levels over time.
Features and functions
7. Personal keys
8. Weight-Only
Key 6. Arrow (Select) Buttons
Accessories
9. Lithium Batteries
CR2032 (2)
1. Display
Screen
2. Ball-of Foot
Electrodes
4. Heel
Electrodes
5. Set Button
Open as shown.
Direction of the batteries.
10. Carpet Feet (4)
3. Features
Buttons
Detachable Carpet Feet
(only for piles up to 0.4”
(10 mm) thick)


Produktspezifikationen

Marke: Tanita
Kategorie: Persönliche Waage
Modell: BC-350

Brauchst du Hilfe?

Wenn Sie Hilfe mit Tanita BC-350 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Persönliche Waage Tanita

Bedienungsanleitung Persönliche Waage

Neueste Bedienungsanleitung fĂĽr -Kategorien-