Synco P2L Bedienungsanleitung

Synco Mikrofon P2L

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Synco P2L (2 Seiten) in der Kategorie Mikrofon. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned herein.

Microphone P2L User Manual

Caring For Your SYNCO Product

Package List

Product Instruction

Operations

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

TX Transmitter x2

RX Receiver (Lightning

Connector) x1 Wireless Charging Case x1

Charging Cable x1

Type-C to 3.5mm Adapter x1

TX Transmitter

RX Receiver

Wireless Charging Case

Indicator — Transmitter (Double press the Power button to turn o󽗈 light e󽗈ect)

Indicator — Receiver

Indicator — Wireless Charging Case

① Power

② Working Indicators

③ Built-in Mic

④ Contacts

⑤ Pocket Clip

① Vocal E󽗈ects/ Mono/Stereo

② Type-C Port

③ Working Indicators

④ Connector

⑤ Contacts

① Pairing/ Power Prompt

② Type-C Port

③ Working Indicators

④ Contacts

1. Usage

2. Pairing

3. Charging

4. Check the power

5. Use vocal e󽗈ects

① Tap on the right side of charging case to pop out the drawer

② Take the TX and RX out

③ TX should boot automatically as it leaved the case, and switch itself o󽗈 automatically

when returning to the case.

(Forcible switch: Long press the Power button on TX for 3 seconds)

④ RX should boot automatically as it is plugged into smartphone

① Place the TX and RX in the case with their contacts are connected with the case’s

② Long press the Pairing button on the case for 3 seconds with the drawer open

③ The indicators on the TX and RX should light up and illuminate sequentially when

pairing is successful

Note: The transmitter will automatically switch o󽗈 if it is unpaired or disconnected for 5

minutes.

Charge the TX: Place the TX in the case with contacts connected with the case’s.

Charge the case: Connect the case with power supply via the charging cable.

TX: Short press the Power button, the indicators will light up according to remain power

for 5 seconds

Charging Case: Short press the Power Prompt button, the indicators will light up

according to remain power for 5 seconds

Short press the Vocal E󽗈ects button on the receiver to switch sound e󽗈ects: Original >> Studio FX >> KTV FX >> Voice

Ampli󽗉cation >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.

Default e󽗈ect: Original.

Note: The vocal e󽗈ect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal e󽗈ects are

unavailable.

System unpaired

Pairing

System unpaired

Charging, and then turns o󽗈 when fully charge

Stereo mode (Only original is supported)

System paired, normal working

System paired

Mono mode-Original sound

Low battery

Mono mode-Vocal e󽗈ects on

Flash concurrently

Illuminate sequentially

Flash concurrently

Single light keeps on (light e󽗈ect o󽗈)

Single light keeps on & Illuminate sequentially

Single light keeps on (in the case)

Single light keeps on & Illuminate sequentially

two-way

Illuminate sequentially(light e󽗈ect on)

Illuminate sequentially

Single light 󽗊ashes

Single light 󽗊ashes twice & Illuminate sequentially

Working

Indicators(White

Light)

Working

Indicators(White Light)

Working

Indicators

(White

Light)

Working

Indicators(Red Light)

Long press for 3 seconds

6. Mono/ Stereo

Mono-Original

Mono-Other vocal e󽗈ects

Mono-Original

Long press the Mono/Stereo button on the RX once

Stereo

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

https://www.facebook.com/syncomicrophones

Guangzhou Zhiying Technology Co., Ltd

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation speci󽗉cation

Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

Modi󽗉cations to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of

element or circuit, label alteration

The code on product is inconsistent with that of warranty certi󽗉cate, or the code on the product or warranty certi󽗉cate

is altered or torn o󽗈

All consumable accessory attached to a product, like cable, wind mu󽗈, battery

Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can

always contact SYNCO’s customer service through email at support@syncoaudio.com.

Please retain your sales receipt and warranty certi󽗉cate as proof of purchase. If any of these documents is missing,

only sales return or chargeable service will be provided.

If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under

normal use within 30 days upon receipt of the product.

2. Original SYNCO products are entitled to limited warranty service. The warranty period begins on the date of 12-month

purchase of brand new, unused products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the

defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty

WARRANTY CERTIFICATE

USER INFORMATION

SALES INFORMATION

REPAIR RECORD

RESULT

Please register your warranty. Meanwhile, you are welcomed to contact us via Email：

support@syncoaudio.com

Customer Name:

Phone Number:

Email:

Address:

Sales Date:

Model:

Product Code:

Dealer:

Service Date:

Technician:

Issue:

Solved Unsolved Returned(Replaced)

TX Transmitter

RX Receiver

Speci󽗉cations

Wireless Transmission

RF Frequency Band

Frequency Response

Working Distance

Sampling Rate

Bit Depth

Sensitivity

SNR

RF Output Power

Battery Type

Battery Charging Time

Battery Life

Dimensions

Material

Weight

Wireless Transmission

RF Frequency Band

Digital 2.4GHz

2400-2483.5MHz

20Hz-20KHz

492ft/150m(LOS area); 164ft/50m(NLOS area)

48KHz

16Bit

-26dB

>75dB

10dB

Built-in Lithium Battery, 120mAh

1.5H

49x19x19 (mm)

ABS

10g

Digital 2.4GHz

2400-2483.5MHz

Working Distance

Sampling Rate

Bit Depth

Antenna

Monitoring

Connector

Power Input

Dimensions

Material

Weight

492ft/150m(LOS area); 164ft/50m(NLOS area)

48KHz

16Bit

Built-in

3.5mm In-Ear Monitoring

Lightning Output

Type-C

49x30x9 (mm)

ABS

Wireless Charging Case

Battery Type

Battery Charging Time

Charging Port

Power Requirements

Dimensions

Weight

Built-in Lithium Battery, 700mAh

Type-C Port

5V 2A

70x68x38mm

87.5g

8. In-Ear monitoring

Plug the included Type-C to 3.5mm Adapter into the Type-C Port on the receiver. Then plug in your headphones to real-

time monitor mic recording and device’s backgrounding.

Note: The included Type-C to 3.5mm Adapter is exclusive, not available for other devices.

7. Charging phone device

Plug your phone charging cable into the Type-C Port on the receiver.

Produktspezifikationen

Marke:	Synco
Kategorie:	Mikrofon
Modell:	P2L

Brauchst du Hilfe?

Wenn Sie Hilfe mit Synco P2L benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Mikrofon Synco

Synco CMic-V1M Bedienungsanleitung

22 August 2024

Synco Mic-M3 Bedienungsanleitung

22 August 2024

Synco Vlogger Kit 2 Bedienungsanleitung

22 August 2024

Synco MMIC-U1L Bedienungsanleitung

20 August 2024

Synco Mic-M2S Bedienungsanleitung

19 August 2024

Synco WMic-TS Bedienungsanleitung

18 August 2024

Synco Lav-S6M2 Bedienungsanleitung

18 August 2024

Synco P1L Bedienungsanleitung

18 August 2024

Synco WAir-G1-A2 Bedienungsanleitung

18 August 2024

Synco Wair-G1-A1 Bedienungsanleitung

17 August 2024

Bedienungsanleitung Mikrofon

Neueste Bedienungsanleitung für -Kategorien-

IPEVO Vocal Bedienungsanleitung

3 Dezember 2024

Karma GM 30W Bedienungsanleitung

30 November 2024

MXL DX-2 Bedienungsanleitung

29 November 2024

Lectrosonics SMWB/E07-941 Bedienungsanleitung

29 November 2024

Power Dynamics PD524 Bedienungsanleitung

15 Oktober 2024

AKG WMS420 Bedienungsanleitung

13 Oktober 2024

Sennheiser ew 100 G4-845-S Bedienungsanleitung

13 Oktober 2024

Audio-Technica BP892xCH Bedienungsanleitung

12 Oktober 2024

Sennheiser SKM 300-835 G3-G Bedienungsanleitung

9 Oktober 2024

Sennheiser SKM 500 G4 Bedienungsanleitung

9 Oktober 2024