Switel BCF 860 Bedienungsanleitung
Lesen Sie kostenlos die ๐ deutsche Bedienungsanleitung fรผr Switel BCF 860 (2 Seiten) in der Kategorie Babyphone. Dieser Bedienungsanleitung war fรผr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
BCF 860 Baby Monitor
3
2
1
4
56
7
8
9
10
11
12
13
15
14
16
17 18 19 21 2220 23
24
25
26
ENGLISH
Operating Manual
Please read and observe the following in๎
formation and keep the operating manual
nearby for future reference!
Safety information
๎ WARNING!
โข Risk of fatal injury through cable!
๎Children could become entangled in the cables and strangle
themselves.
๎Ensure that the baby monitoring units and power cables are
out of reach of babies/children, i.e. they are at least one meter
away.
โข Risk of explosion!
๎Only use the power adapter plugs supplied!
๎Only use batteries supplied or ones of the same type!
๎Always treat batteries with due care and attention and only
use batteries as described.
๎Never use standard and rechargeable batteries together.
Never use rechargeable batteries or standard batteries with
different capacities or charge statuses together. Never use
standard or rechargeable batteries which are damaged.
โข Risk of suffocation through small objects, packaging and
protective foil!
๎Keep children away from the product and its packaging!
๎ CAUTION!
โข Risk of fire through power adapter plugs!
Power adapter plugs can heat up.
๎Never leave any objects on the power adapter plugs. Ensure
access to power adapter plugs is not obstructed by furniture or
such.
โข Risk of tripping due to improperly laid cable!
๎Lay the cables so that nobody can trip over them!
โข Risks to health and the environment from batteries!
๎Never open, damage or swallow batteries or allow them to
pollute the environment. They could contain toxic and ecolo๎
gically harmful heavy metals.
Operating elements
Receiver unit
1 Antenna
2 button: Change transmitter unit
3 button: Feed alert / Zoom
4 Stand
5 Display
6 button: Confirm input / Open menu
7 button: Navigation in menu
8 button: Talk button / Back
9 Microphone
10 AV port (3.5 mm socket)
11 LED, status indicator
12 button: Receiver unit on/off switch
13 SD card slot
14 Power adapter socket
15 Loudspeaker
16 Battery compartment
Transmitter unit
17 button: Transmitter unit on/off switch
18 LED, status indicator
19 Camera
20 LED, night vision
21 Microphone
22 button: Increase volume
23 button: Reduce volume
24 Temperature sensor
25 Power adapter socket
26 Light sensor
Intended use
The baby monitor serves to monitor a baby/child in a room. The
transmitter unit, located near the child, transmits noises and images
from its immediate vicinity to the receiver unit. Any other use is con๎
sidered unintended use. Unauthorised modification or reconstruction
is not permitted. Under no circumstances open the devices or com๎
plete any repair work yourself.
The devices are not intended for medical purposes. Warning
and signal tones from respiratory or heartbeat monitoring equip๎
ment are not transmitted.
Use only in suitable environments
Observe all local directives and regulations.
Prevent excessive exposure to smoke, dust, vibration, chemicals,
moisture, heat and direct sunlight.
Package contents
- Receiver unit
- Transmitter unit
- Base for transmitter unit
- Battery for receiver unit
- 2 power adapter plugs
- Operating manual
Display and explanation of operations
รAction to take
๎Result of action
[2] Reference in the graphic
Press the button
๎ฐPress and hold the button
5 sec. ๎ฐKeep the button pressed for 5 seconds
๎Select menu options by pressing the Navigation
button and confirm it by pressing
๎Play๎All๎
Menu option in the display
Icon in the display
Inserting the battery in the receiver unit
๎Slide the cover on the rear downwards and remove it.
๎Insert the battery in the battery compartment [16], ensure correct
polarity.
๎Close the battery compartment.
Charge the batteries for at least 12 hours when charging for the
first time and ensure they are subsequently discharged and
charged fully. This aids a long service life of the batteries.
Inserting the SD card in the receiver unit
In order to record videos or pictures, an SD card must be inserted
(not included).
๎ ๎Insert the SD card in the slot [13] provided The SD card
latches audibly in place.
Putting the receiver unit into operation
The receiver unit can be powered by the battery, by a normal mains
power supply via the power adapter plug or by a USB connection on
a computer.
Connecting the receiver unit
๎Connect the power adapter to the power adapter socket [14] on
the receiver unit and a properly installed mains power outlet.
Switching the receiver unit on/off
๎ ๎ฐ ๎ [12] 5 sec. Receiver unit is switched on, start screen
appears in the display.
๎ [12] 5 sec. ๎ฐ ๎ Receiver unit is switched off, the display
goes out.
Operating and charge indicators on the receiver unit
The status indicator LED [11] lights up. ๎ The receiver unit is
switched on.
Putting the transmitter unit into operation
The transmitter unit is not equipped with a built-in battery. It can only
be operated via the mains power supply using the power adapter
plug.
Connecting the transmitter unit
๎Connect the power adapter to the power adapter socket [25] on
the transmitter unit and a properly installed mains power outlet.
Switching the transmitter unit on/off
The transmitter unit continues to transmit even when the receiv๎
er unit is switched off. The signals can be received by other
devices. A maximum of 4 transmitter units can be registered on the
receiver unit.
๎ [17] 5 sec. ๎ฐ ๎ Transmitter unit is switched on, operating
indicator lights up green.
Registering a transmitter unit
Registration occurs automatically when the transmitter unit is
switched on. ๎ The image from the camera appears in the display.
Selecting a transmitter unit
If several transmitter units are registered, a transmitter unit can be
selected manually. Transmitter unit 1 is selected as standard.
๎1x [2] ๎ ๎Wait๎for๎connectingโฆ.๎
appears in the display, transmit๎
ter unit 2 is selected.
๎2x [2] ๎ ๎Wait๎for๎connectingโฆ.๎
appears in the display, transmit๎
ter unit 3 is selected.
๎3x [2] ๎ ๎Wait๎for๎connectingโฆ.๎
appears in the display, transmit๎
ter unit 4 is selected.
Icons in the display
๎ Signal strength
The equipment has a range of up to 300๎m. The range can be
reduced by obstructions, such as walls etc. Electronic equip๎
ment in the vicinity can also cause disturbance.
๎ Feed alert is activated
๎ Battery is full
๎ Battery is empty
When the battery is being charged, bars continually run through
the battery icon.
VOX mode (voice activation)
When VOX mode is activated, the display is switched off after a short
time (๎ECO๎Mode๎activated๎
appears in the display) and is switched on
again after detecting a sound.
Switching VOX mode off
๎ [6] ๎ ๎VOICE๎SENSOR๎
๎ ๎OFF๎
Talk function
๎ ๎ฐ ๎ [8] Voice communication is possible from the receiver
unit to the transmitter unit.
Night vision function
If the brightness of the area monitored no longer suffices for normal
operation, the equipment automatically switches to night vision.
When the night vision function is activated, only objects up to
2 m away can be viewed.
Photo function
In order to take a photo, an SD card (not included) must be installed
in the receiver unit .
๎ ๎ [7] down The photo icon appears briefly in the display, the
photo is stored on the SD card.
Video function
In order to record a video, an SD card (not included) must be in๎
stalled in the receiver unit.
๎ [7] up ๎ The video icon appears briefly in the display, the
video is stored on the SD card.
Setting the feed alert
You can set-up an acoustic feed alert to be sounded at 30 minute
intervals within a time period of 30 minutes to 4 hours.
๎ [3], repeatedly if necessary.
Settings using the menu
The menu can be used to execute various functions and define
diverse settings. All the settings are confirmed by pressing the
button [6]. Press the button [8] to skip one menu level back.
Alert signals
You can set-up alert signals to be sounded in the event of connec๎
tion problems between the receiver and transmitter units or if the
battery charge in the receiver unit is low.
Alert signal for connection difficulties
You can set-up an alert signal to be sounded in the event of connec๎
tion problems between the receiver and transmitter units.
๎ [6] ๎ ๎ALERT๎RINGTONE๎
๎ ๎No๎Connect๎Alarm๎
๎ ๎ON๎
/๎OFF๎
Alert signal for low battery charge
You can set-up an alert signal to be sounded in the event the battery
in the receiver unit must be recharged.
๎ [6] ๎ ๎ALERT๎RINGTONE๎
๎ ๎Low๎Battery๎Alarm๎
๎ ๎ON๎
/๎OFF๎
Brightness
๎ [6] ๎ ๎SCREEN๎DISPLAY๎
๎ ๎Brightness๎
๎ ๎Level๎1๎
- ๎Level๎5๎
Back-lighting
You can define how long the display should remain on after the last
time a button was pressed.
๎ [6] ๎ ๎SCREEN๎DISPLAY๎
๎ ๎LCD๎Backlight๎Time๎
๎
๎Keep๎On๎๎
๎10๎sec๎
/ /๎20๎sec๎
/๎30๎sec๎
/ /๎1๎min๎
๎3๎min๎
Picture mode
๎ [6] ๎ ๎SCREEN๎DISPLAY๎
๎ ๎Picture๎Mode๎
/๎ ๎Standard๎
๎Vivid๎
Lullaby
You can play lullabies on the transmitter unit. Settings, such as the
volume, are adjusted using the receiver unit.
Play once
๎ ๎ ๎LULLABIES๎
๎ ๎Lullaby๎1๎
- ๎Lullaby๎8๎
[Select an entry] ๎
๎Play๎Once๎
Play all
๎ ๎ ๎LULLABIES๎
๎ ๎Play๎All๎
Repeat playback
๎ ๎ ๎LULLABIES๎
๎ ๎Lullaby๎1๎
- ๎Lullaby๎8๎
๎ ๎Play๎Repeat๎
Setting the volume
You can alter the volume at which the lullabies are played.
๎ [22] Increase the volume
๎ [23] Reduce the volume
Sensitivity
Example: High.
๎ ๎ ๎VOICE๎SENSOR๎
๎ ๎High๎
If the ๎VOICE๎SENSOR๎
is set to ๎OFF๎
, image and sound are
transmitted continuously.
Temperature
You can set the temperature unit, the highest and lowest temperat๎
ure limits and the display of the temperature for the environment
monitored. You can also define whether an acoustic alert signal
should be issued if the ambient temperature moves outside the spe๎
cified range.
Temperature unit
๎ [6] ๎ ๎TEMPERATURE๎
๎ ๎Scale๎
๎ ๎Celsius๎
/๎Fahrenheit๎๎
Minimum temperature
๎ [6] ๎ ๎TEMPERATURE๎
๎ ๎Minimum๎
Maximum temperature
๎ [6] ๎ ๎TEMPERATURE๎
๎ ๎Maximum๎
Alert signal
๎ [6] ๎ ๎TEMPERATURE๎
๎ ๎ALERT๎RINGTONE๎
๎ ๎ON๎
/๎OFF๎
Language
๎ [6] ๎ ๎LANGUAGE๎
๎ ๎English๎
/๎Franรงais๎
/๎Deutsch๎
/๎Nederlands๎
etc.
Browsing through the SD card
You can browse through the photos and videos recorded on the SD
card on the receiver unit and deleted them, if necessary.
Displaying photo recordings
๎ [6] ๎ ๎SD๎BROWSER๎
๎ ๎Play๎
๎๎ Photo is displayed
Displaying video recordings
๎ [6] ๎ ๎SD๎BROWSER๎
๎ ๎Play๎
๎ ๎Video is displayed
Time and date
๎ [6] ๎ ๎TIME๎SET๎
๎ Set the time
๎ [6] ๎ ๎TIME๎SET๎
๎ Set the date
Connecting to a television
Connect the receiver unit [10] to the AV input of a television set using
a suitable AV cable (not included).
Power adapter plug, receiver unit
Using the energy-efficient power adapter plug (input 100-240๎VAC,
output 6๎VDC, 790๎mA) the zero load is approx. 0.04 - 0.06 W. The
average efficiency is approx. 71.94 %. The maximum power con๎
sumption is approx. 4.14 W.
Power adapter plug, transmitter unit
Using the energy-efficient power adapter plug (input 100-240๎V
AC
,
output 6๎V
DC
, 790๎mA) the zero load is approx. 0.04 - 0.06๎W. The
average efficiency is approx. 71.94๎%. The maximum power con๎
sumption is approx. 3 W.
Service hotline
In the case of technical problems, contact our Service hotline.
Switzerland: Tel. 0900 00 1675 (national charges, Swisscom at time
of going to print: CHF 2.60/min).
In the case of claims under the terms of guarantee, contact your
sales outlet.
Maintenance
๎Clean the surface of the housing with a soft, fluff-free cloth.
๎Do not use any cleaning agents or solvents.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic
and electrical devices, owners are obliged to dispose of old elec๎
tronic and electrical devices in a separate waste container. The
adjacent symbol indicates that the device must not be disposed of in
normal domestic waste!
You are legally obliged to dispose of power packs and batter๎
ies at the point of sale or in the corresponding containers
provided at collection points by local public waste authorities.
Disposal is free of charge. The symbols indicate that the
batteries must not be disposed of in normal domestic waste
and that they must be brought to collection points provided
by local public waste authorities.
Packaging materials must be disposed of according to local regula๎
tions.
Guarantee
SWITEL equipment is produced and tested according to the latest
production methods. The implementation of carefully chosen materi๎
als and highly developed technologies ensure trouble-free function๎
ing and a long service life. The terms of guarantee do not apply to
the batteries or power packs used in the products. The period of
guarantee is 24 months from the date of purchase.
All deficiencies related to material or manufacturing errors within the
period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tamper๎
ing by the purchaser or third parties. Damage caused as the result of
improper handling or operation, normal wear and tear, incorrect
positioning or storage, improper connection or installation or Acts of
God and other external influences are excluded from the terms of
guarantee. In the case of complaints, we reserve the right to repair
defective parts, replace them or replace the entire device. Replaced
parts or devices become our property. Rights to compensation in the
case of damage are excluded where there is no evidence of intent or
gross negligence by the manufacturer.
If your device does show signs of a defect within the period of guar๎
antee, please contact the sales outlet where you purchased the
SWITEL device, producing the purchase receipt as evidence. All
claims under the terms of guarantee in accordance with this agree๎
ment can only be asserted at the sales outlet. No claims under the
terms of guarantee can be asserted after a period of two years from
the date of purchase and hand-over of the product.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications
terminal equipment and the mutual recognition of their con๎
formity. Conformity with the above mentioned directive is confirmed
by the CE mark on the device. To view the complete Declaration of
Conformity, please refer to the free download available on our web
site www.switel.com.
Produktspezifikationen
| Marke: | Switel |
| Kategorie: | Babyphone |
| Modell: | BCF 860 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Switel BCF 860 benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Babyphone Switel
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
Bedienungsanleitung Babyphone
- Babyphone Tristar
- Babyphone Basetech
- Babyphone Belkin
- Babyphone Hama
- Babyphone Manhattan
- Babyphone Medion
- Babyphone Nedis
- Babyphone Philips
- Babyphone SilverCrest
- Babyphone Concept
- Babyphone Tefal
- Babyphone IKEA
- Babyphone Technaxx
- Babyphone Alecto
- Babyphone Beurer
- Babyphone Cresta
- Babyphone Denver
- Babyphone EMOS
- Babyphone Kรถnig
- Babyphone Medisana
- Babyphone Grundig
- Babyphone Trebs
- Babyphone Esscom
- Babyphone Topcom
- Babyphone Geemarc
- Babyphone Motorola
- Babyphone Elro
- Babyphone EZVIZ
- Babyphone Olympia
- Babyphone Hyundai
- Babyphone Gigaset
- Babyphone Tesla
- Babyphone GOCLEVER
- Babyphone Withings
- Babyphone Babymoov
- Babyphone Chicco
- Babyphone Fysic
- Babyphone Sanitas
- Babyphone Terraillon
- Babyphone Beaba
- Babyphone Hartig And Helling
- Babyphone NUK
- Babyphone Reer
- Babyphone Fisher-Price
- Babyphone Lupilu
- Babyphone Ariete
- Babyphone BabyOno
- Babyphone Jane
- Babyphone Luvion
- Babyphone Tommee Tippee
- Babyphone Ansmann
- Babyphone Duux
- Babyphone Tigex
- Babyphone TRENDnet
- Babyphone Summer
- Babyphone First Alert
- Babyphone Alcatel
- Babyphone Amplicomms
- Babyphone Audioline
- Babyphone Binatone
- Babyphone Brondi
- Babyphone Swissvoice
- Babyphone Vtech
- Babyphone Kodak
- Babyphone Nova
- Babyphone Lionelo
- Babyphone TOMY
- Babyphone Safety 1st
- Babyphone Graco
- Babyphone Oricom
- Babyphone Albrecht
- Babyphone Uniden
- Babyphone Kogan
- Babyphone D-Link
- Babyphone Eufy
- Babyphone TrueLife
- Babyphone HQ
- Babyphone Cobra
- Babyphone Neno
- Babyphone Grixx
- Babyphone Angelcare
- Babyphone Babyfon
- Babyphone IBaby
- Babyphone Lindam
- Babyphone Neonate
- Babyphone SereneLife
- Babyphone Snuza
- Babyphone Xblitz
- Babyphone Foscam
- Babyphone Oregon Scientific
- Babyphone Lorex
- Babyphone Duronic
- Babyphone Fischer Price
- Babyphone Hartig Helling
- Babyphone Heimvision
- Babyphone Jablotron
- Babyphone MicroTalk
- Babyphone Modern-Electronics
- Babyphone Oretti
- Babyphone Pabobo
- Babyphone Philips-Avent
- Babyphone Chipolino
- Babyphone British Telecom
- Babyphone Bebetel
- Babyphone Levana
- Babyphone BT
- Babyphone Summer Infant
- Babyphone Joblotron
- Babyphone Mobi
- Babyphone Hubble Connected
- Babyphone Axvue
- Babyphone Babysense
- Babyphone LeamsiQ
- Babyphone BabySafe
- Babyphone Chillax Baby
- Babyphone Peekyboo
Neueste Bedienungsanleitung fรผr -Kategorien-
9 Oktober 2024
8 Oktober 2024
7 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024