Swann Pro-642 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Swann Pro-642 (8 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
1
PRO-642
Multi-Purpose Day / Night Security Camera
M642CAM270213E
English
2
Warranty Information, Verications & Warnings
Swann Communications warrants this product against defects in workmanship and material for a period
of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase
for warranty validation. Any unit which proves defective during the stated period will be repaired without
charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all
freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all
shipping costs incurred when shipping from and to any country other than the country of origin.
The warranty does not cover any incidental, accidental or consequential damages arising from the use
of or the inability to use this product. Any costs associated with the tting or removal of this product by
a tradesman or other person or any other costs associated with its use are the responsibility of the end
user. This warranty applies to the original purchaser of the product only and is not transferable to any
third party. Unauthorized end user or third party modications to any component or evidence of misuse
or abuse of the device will render all warranties void.
By law some countries do not allow limitations on certain exclusions in this warranty. Where applicable
by local laws, regulations and legal rights will take precedence.
For Australia: Our goods come with guarantees which cannot be excluded under Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to major failure.
Warning
Modications not approved by the party responsible for compliance could
void user’s authority to operate the equipment.
IMPORTANT SAFETY INSTRUCTIONS
Make sure product is xed correctly and stable if fastened in place
Do not operate if wires and terminals are exposed
IMPORTANT NOTE: All jurisdictions have specic laws and regulations relating to the use of cameras.
Before using any camera for any purpose, it is the buyer’s responsibility to be aware of all applicable laws
and regulations that prohibit or limit the use of cameras and to comply with the applicable laws and
regulations.
FCC Verication
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help
These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:
These devices may not cause harmful interference, and
These devices must accept any interference received, including interference that may cause
undesired operation.
3
Congratulations on your purchase of this ! Swann PRO-642 Camera
This installation and setup guide will walk you through the basics of:
Mounting your camera
Choosing a location, Aiming the camera, Suitable mounting surfaces
Connecting the camera
Where to connect power, How to run cables for improved weather-resistance
Conguring the camera (optional)
Using the OSD to alter your image settings for maximum personalization
Your package contains:
1, 2 or 4 PRO-642 Camera(s)
1, 2 or 4 DC / Video Cable(s)
1 x Power Adapter
1 x 2-way DC Power Splitter and
/ or 1 x 4-way DC Power Splitter
(2 and 4 camera packages only)
1, 2 or 4 BNC to RCA Adapter(s)
Mounting Hardware
Security Notication Stickers
Operating Instructions
The PRO-642 is very sensitive to light and therefore can make use of even the smallest
amount of light to provide an image of what it sees. In low light, this comes through
as a black and white image.
In complete or near-total darkness, the camera uses built-in infrared LEDs to
illuminate the area in front of it. This light is invisible to the human eye, although you
might notice a faint red glow coming from the front of the camera - this is normal.
It has an OSD (on-screen display), that you can access to change various options for
image quality, white balance and shutter speed.
Introduction


Produktspezifikationen

Marke: Swann
Kategorie: Überwachungskamera
Modell: Pro-642

Brauchst du Hilfe?

Wenn Sie Hilfe mit Swann Pro-642 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera Swann

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-